Influence of the Temperature on Coated Bituminous of Road Structures in Senegal (West Africa)
- 1 Mechanics and Modeling Laboratory, UFR Engineering Sciences, University of Thies, Thies, Senegal
- 2 Institute of Earth Sciences, Cheikh Anta Diop University, Dakar, Senegal
- 3 Mechanics and Modeling Laboratory, UFR Engineering Sciences, University of Thies, Thies, Senegal
- 4 Laboratory of Materials, Mechanics and Hydraulics, Polytechnic School of Thies, Thies, Senegal
Abstract
The Senegalese road network is strongly influenced in the long term by seasonal variations in climate and weather conditions. Indeed, much of the damage is due to these environmental factors. The objective of this paper is to study the behaviour of bituminous structures under the effect of high temperatures. Material samples were taken for a physico-mechanical characterization of the coated components. The results show that Marshall creep (2.87, 3.39, 5, 5.5 mm) and the bitumen penetrability increase with the increasing of temperatures respectively from 34°C to 45 ° C and from 20 ° C to 50 ° C. Marshall Stability drops from 15.81 kN to 11.31 kN for temperatures between 34 ° C and 45 ° C. The simulation carried out on Alize-LCPC shows an increase in distortions of traction at the basis of the rolling layer and at the top of the platform if temperatures vary between 34 ° C and 45 ° C. This work makes it possible to conform that the bituminous concrete is thermally sensitive and the hypothesis of fixing the constant modulus of the bituminous layers in Senegal for all projects remains unsuitable for a good dimensioning of sustainable road structures. The knowledge of the equivalent regional temperature will make it possible to produce quality pavements with a long lifespan.
- Fall, M., Sawangsuriya, A., Benson, C.H., Edil, T.B. and Bosscher, P.J. (2007) On the Investigations of Resilient Modulus of Residual Tropical Gravel Lateritic Soils from Senegal (West Africa). Geotechnical and Geological Engineering, 26, Article No. 13. https://doi.org/10.1007/s10706-007-9144-5
- Dione, A. (2015) Estimation of the Reversible Modulus of Untreated Gravel and Finite Element Modelling of Flexible Pavements for Mechanistic-Empirical Design. Doctoral Thesis at ED2DS UFR SI, 184 p.
- Aidara, M.L.C. (2016) The Complex Modulus and Impact of Aggregate on the Prediction of the Dynamic Modulus of Asphalt Pavements. Application on Rationnel Dimensionings and Mechanistic-Empirical. Doctor of Philosophy Thesis at ED2DS UFR SI, 265 p.
- ANACIM (2007) Guide Technique.
- AGEROUTE (2015) Catalogue de structures de chaussées neuves et Guide de dimensionnement des chaussées au Sénégal, 214 p.