Experimental Geotechnical Characterization Campaign of the Matam Soil for Lithology: Application to the Study of Supports of the Balterdi Bridge — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Experimental Geotechnical Characterization Campaign of the Matam Soil for Lithology: Application to the Study of Supports of the Balterdi Bridge
Civil Engineering Department, Higher Polytechnic School, Cheikh Anta Diop University of Dakar, Dakar, Senegal
,
Civil Engineering Department, Higher Polytechnic School, Cheikh Anta Diop University of Dakar, Dakar, Senegal
,
Technosol Engineering Laboratory, Dakar, Senegal
,
Civil Engineering Department, Higher Polytechnic School, Cheikh Anta Diop University of Dakar, Dakar, Senegal
,
Civil Engineering Department, Higher Polytechnic School, Cheikh Anta Diop University of Dakar, Dakar, Senegal
1 Civil Engineering Department, Higher Polytechnic School, Cheikh Anta Diop University of Dakar, Dakar, Senegal
2 Civil Engineering Department, Higher Polytechnic School, Cheikh Anta Diop University of Dakar, Dakar, Senegal
This paper presents a geotechnical study whose objective is to determine the lithology of the soil of Balterdi village (Matam, Senegal). A bridge-type structure with six supports is to be built on the studied site. The drilling program consisted of six core drillings (SC) each 30 m deep with sampling and six destructive drillings with pressuremeter tests (SP) every 1.5 m up to 30 m deep. A pair of core and pressuremeter tests was carried out under each support. From the results of the core drill holes and the geological model of the site, it can be seen that the lithology of the soil along the structure consists essentially of soft clay layers, becoming firm at depth over the first 18 m on average (with some incursions of sandy layers) resting on medium to compacted sand up to 30 m. Brown clayey fill is also present between piers P3 and P5. The presence of a watercourse along the structure is noted. The foundations will therefore be carried out in the water. The results of the pressuremeter tests confirm the homogeneity of the soil over the whole area. Indeed, the values obtained are almost similar for all the tests. According to the limit pressures obtained, the clayey-sandy formations encountered along the structure are respectively soft to firm and moderately compact to compact. Their limit pressures are high enough to allow good bearing capacities.
Kansango, M.P., Kavula, N.E., Sow, L. and Lunda, H.J.M. (2019) Geotechnical Mapping by Deep Learning Artificial Neural Network Approach. European Scientific Journal, 15, 233-251.
Kavula, N.E., Kansango, M.P., Sow, L., Bilez, N.B., Corneille, K.M. and Obed, T.K. (2020) Coupling Discriminating Statistical Analysis and Artificial Intelligence for Geotechnical Characterization of the Kampemba’s Municipality Soils (Lubumbashi, DR Congo). Geomaterials, 10, 35-55. https://doi.org/10.4236/gm.2020.103003
Sow, L. (2020) Study of the Behaviour of Senegalese Ballast Materials during Compaction with the C-Mould: Case of Bandia Limestone and Diack Basalt. Key Engineering Materials, 831, 81-86. https://doi.org/10.4028/www.scientific.net/KEM.831.81
Olsen, R.S. (1994) Normalization and Prediction of Geotechnical Properties Using the Cone Penetrometer Test (CPT). US Army Engineer Waterways Experiment Station, Vicksburg.
Gupta, R., Rodrigo, S., Mitchell, J. and Jamiolkowski, M. (2001) Calibration Chamber Size Effects on Penetration Resistance in Sand. Journal of Geotechnical and Geoenvironmental Engineering, 127, 628. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:7(628)
Holden, J.C. (1971) Research on Performance of Soil Penetrometers. Internal Report, Country Roads Board of Victoria, Victoria.
Ghionna, V.N. and Jamliolkowski, H. (1991) A Critical Appraisal of Calibration Chamber Testing of Sands. Proceedings of the 1st International Symposium on Calibration Chamber Testing, Potsdam, 28-29 June 1991, 13-39.
Salgado, R., Mitchel, J.K. and Jamiolkowski, M. (1998) Calibration Chamber Size Effects on Penetration Resistance in Sand. Journal of Geotechnical and Geoenvironmental Engineering, 124, 878-888. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:9(878)
Sow, L., Diouf, G.T.Y. and Diop, M. (submitted) Experimental Campaign for the Physical, Mechanical and Chemical Characterization of the Matam Soil: Application to the Study of Supports of the Balterdi Bridge. Innovative Infrastructure Solutions, Springer, Switzerland.
Diedhiou, A., Sow, L. and Dione, A. (2020) Contribution to Comparative Study of Physical-Chemical Characteristics of Diack Basalt and Bandia Limestone for Use in Railway Engineering. Geomaterials, 10, 25-34. https://doi.org/10.4236/gm.2020.102002
Fawaz, A., Farah, E. and Hagechehade, F. (2014) Study and Relation between the Pressuremeter and Elastic Moduli of Soil, National Geotechnical and Engineering Geology Days JNGG2014. https://www.semanticscholar.org/paper/A-Study-of-the-Pressuremeter-Modulus-and-Its-to-the-Fawaz-Hagechehade/c753f8e52bf301911e39f9e917474b584774a702
Baguelin, F., Jézequel, J.F. and Shields, D.H. (1978) The Pressuremeter and Foundation Engineering, Series on Rock and Soil Méchanics. Trans Tech Publications, Clausthal.
Biarez, J., Gambin, M., Gomes-Correia, A., Flavigny, E. and Branque, D. (1998) Using Pressuremeter to Obtain Parameters to Elastic-Plastic Models for Sands. Geotechnical Site Characterization, Roberton & Mayne, Balkerna, Rotterdam.
Gambin, M., Flavigny, E. and Boulon, M. (1996) The Pressuremeter Module: History and Modelling. 11th Franco-Polish Colloquium on Soil and Applied Rock Mechanics, Gdansk, 53-60.
Goh, K.H., Jeyatharan, K. and Wen, D. (2012) Understanding the Stiffness of Soils in Singapore from Pressuremeter Testing. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 43, No. 4.
Cailletaud, G. and Pilvin, P. (1994) Identification and Inverse Problems Related to Material Behavior. In: Inverse Problems in Engineering Mechanics, Balkema, Rotterdam, 79-86.
Cambou, B. and Bahar, R. (1993) Use of the Pressuremeter Test for the Identification of Intrinsic Parameters of the Behaviour of a Soil. Revue Francaise de Géotechnique, 63, 39-50. https://doi.org/10.1051/geotech/1993063039
Dano, C., Hicher, P.-Y., Tailliez, S. and Varjabedian, M. (2002) Identification of the Behaviour Parameters of the Injected Soils by Inverse Analysis of Pressuremeter Tests. Revue Française de Génie Civil, 6, 631-660. https://doi.org/10.1080/12795119.2002.9692392
Graham, J., Crooks, J.H. and Bell, A.L. (1983) Time Effects on the Stress Strain Behavior of Soft Natural Clays. Géotechnique, 33, 327-340. https://doi.org/10.1680/geot.1983.33.3.327
Gibson, R.E. and Anderson, W.F. (1961) In Situ Measurement of Soils Properties with the Pressuremeter. Civil Engineering and Public Works Review, 56, 615-618. https://doi.org/10.6013/jbrewsocjapan1915.56.618
Hicher, P.Y. (1985) Mechanical Behaviour of Saturated Clays on Various Monotonous and Cyclic Load Paths. Application to Elastoplastic and Viscoplastic Modelling. PhD Thesis, Université Paris 6, Paris.
Hicher, P.Y. and Michali, A. (1996) Identifying Soil Parameters by Means of Laboratory and in Situ Testing. Computers and Geotechnics, 19, 153-170. https://doi.org/10.1016/0266-352X(96)00040-7
Hicher, P.Y. and Shao, J.F. (2002) Methods for Identifying Parameters in Models of Soil and Rock Behaviour 2: Incremental Laws, Viscoplasticity, Damage, Ed. Hermes, 203-230.
Mestat, P. and Riou, Y. (2002) Modélisation des sols et des ouvrages avec le modèle Cam-Clay Modifié. HAL Archives, 6, 801-815. https://hal.archives-ouvertes.fr/hal-01007070/document
Monnet, J. and Khlif, J. (1994) Study of the Elasto-Plastic Equilibrium of a Powdered Soil around the Pressure Meter. Revue Francaise de Géotechnique, 67, 3-12.
Monnet, J. (1995) Theoretical and Experimental Analysis of the Elastoplastic Equilibrium of a Coherent Soil around the Pressuremeter, the Pressuremeter and Its New Avenues. Balkema, Rotterdam, 193-200.
Rangeard, D. (2002) Identification of the Hydro-Mechanical Characteristics of a Clay by Inverse Analysis of Pressuremeter Tests. Ph.D. Thesis, Ecole Centrale de Nantes et Université de Nantes, Nantes.
Rangeard, D., Hicher, P.Y. and Zentar, R. (2003) Determining Soil Permeability from Pressuremeter Tests. International Journal for Numerical and Analytical Methods in Geomechanics, 27, 1-24. https://doi.org/10.1002/nag.258
Rangeard, D. and Hicher, P.Y. (2003) Interpretation of Pressiometric Tests I. Influence of Soil Permeability. Revue Française de Génie Civil, 8, No. 7. https://doi.org/10.3166/rfgc.8.793-817
Sheahan, T.C., Ladd, C.C. and Germaine, J.T. (1994) Time-Dependent Triaxial Relaxation Behavior of a Resedimented Clay. Geotechnical Testing Journal, 17, 444-452. https://doi.org/10.1520/GTJ10305J
Yu, H.S. and Houlsby, G.T. (1991) Finite Cavity Expansion in Dilatant Soils: Loading Analysis. Geotechnique, 41, 173-183. https://doi.org/10.1680/geot.1991.41.2.173
Zentar, R., Hicher, P.Y. and Moulin, G. (2001) Identification of Soil Parameters by Inverse Analysis. Computers and Geotechnics, 28, 129-144. https://doi.org/10.1016/S0266-352X(00)00020-3