Experimental Study on Anchoring Physical Properties of Different Anchoring Lengths Coupled with Temperature and Pressure
- 1 School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan, China
- 2 School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan, China
- 3 School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan, China
- 4 School of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan, China
Abstract
Aiming at deep roadway anchorage solids, laboratory similar model tests were used to reveal the mechanical properties of anchorage solids with different anchorage lengths under the coupling effect of temperature and pressure, and SPSS statistical analysis software was used to conduct linear regression analysis of the ultimate anchorage force obtained from the tests. The results show that: through multiple linear regression analysis, the influence degree of temperature and pressure coupling on the ultimate anchorage force is arranged in order of anchoring length > surrounding rock strength > temperature > side pressure coefficient, and the linear regression equation of the model is obtained. Compared with the linear regression equation of simulation results, the model has a high explanatory ability.
- Li, G., Liang, B. and Zhang, G.H. (2009) Deformation Characteristics and Supporting Parameters Design of High Stress Soft Rock Roadway. Journal of Mining & Safety Engineering, 26, 183-186.
- Xie, S.R., Xie, G.Q., He, S., et al. (2014) Mechanism and Application of Bolting Shotcrete Reinforced Confined Arch Support in Deep Soft Rock Roadway. Journal of China Coal Society, 39, 404-409.
- Zhao, W.L. and Yang, Z.B. (2018) Research on Strong Anchor Injection Support Technology of Deep Soft Rock Roadway. Coal Science and Technology, 46, 92-97.
- Xiao, T.Q., Li, H.M., Li, H.Y., et al. (2017) Study on Drawing Characteristics of Bolt under Different Anchoring Lengths. Journal of Mining & Safety Engineering, 34, 1075-1080.
- Liu, J.Z., Zhang, N. and Han, C.L. (2012) Mechanical Calculation of Axial Force and Shear Distribution of Elastic Drawing Anchor Rod. Journal of China University of Mining & Technology, 41, 344-348.
- Wang, H.T., Wang, Q., Wang, F.Q., et al. (2015) Analysis and Application of Mechanical Effect of Roadway Bolt under Different Anchoring Lengths. Journal of China Coal Society, 40, 509-515.
- Wang, Q.Z., Li, N., Ye, H.W., et al. (2020) Failure Characteristics of Solid under Unidirectional Loading of Single Free Surface Anchor and Load Law of Anchor Bolt. Journal of Mining & Safety Engineering, 37, 665-673.