Slab bending behavior is researched through investigation of the effects of various parameters such as longitudinal ribs volume ratios of concrete, number of support edges, and end connections. The connection between interlayers is very important to render bending performance due to the fact that material-based bonds (e.g., roughened interfaces, adhesive) and mechanical connectors (e.g., dowels, steel bars, shear keys) significantly influence the amount of composite action between interlayers. Complete composite action yields greater stiffness and strength, while partial or non-composite action may lead to premature slip, shear failure, or loss of capacity. The current review summarizes experimental results, analytical solutions, and numerical models in the literature, summarizes current research gaps, and charts future research directions for designing more efficient and ductile slab systems.
Wang, Y., Wang, J., Zhao, D., Hota, G., Liang, R. and Hui, D. (2022) Flexural Behavior of Insulated Concrete Sandwich Panels Using FRP-Jacketed Steel-Composite Connectors. Advances in Materials Science and Engineering , 2022, 1-25. https://doi.org/10.1155/2022/6160841
Ge, Q., Zheng, T., Xiong, F. and Hu, Y. (2025) Research on the Flexural Performance and Degree of Composite Action of Precast Concrete Sandwich Panels with Concrete Ribs. The Structural Design of Tall and Special Buildings , 34, e70016. https://doi.org/10.1002/tal.70016
Li, C., Ma, X., Yang, Y., Omar, A.A., Wu, H. and Qian, L. (2022) Bending Performance of Precast Lightweight Aggregate Concrete Exterior Wallboard with a Concealed Rib Sandwich Structure. Advances in Civil Engineering , 2022, Article ID: 1328583. https://doi.org/10.1155/2022/1328583
Zheng, T., Ge, Q., Xiong, F., Li, G., Xue, Y. and Deng, X. (2023) Study of the Flexural Performance and a Novel Calculation Formula for the Degree of Composite Action for Precast Concrete Sandwich Panels. The Structural Design of Tall and Special Buildings , 32, e2065.
Mercedes, L., Bernat-Maso, E. and Martínez, B. (2022) Bending Behaviour of Sandwich Panels of Vegetal Fabric Reinforced Cementitious Matrix: Experimental Test and Numerical Simulation. Construction and Building Materials , 340, Article 127820. https://doi.org/10.1016/j.conbuildmat.2022.127820
O’Hegarty, R., Kinnane, O., Grimes, M., Newell, J., Clifford, M. and West, R. (2021) Development of Thin Precast Concrete Sandwich Panels: Challenges and Outcomes. Construction and Building Materials , 267, Article 120981. https://doi.org/10.1016/j.conbuildmat.2020.120981
Deng, W., Hua, J., Wang, N., Li, S., Chang, Y., Wang, F., et al. (2025) Flexural Behavior of Lap Splice Connection between Steel-Plate Composite Wall and Reinforced Concrete Foundation Subjected to Impact Loading. Buildings , 15, Article 2707. https://doi.org/10.3390/buildings15152707
Wang, Y., Sah, T.P., Liu, S. and Zhai, X. (2022) Experimental and Numerical Studies on Novel Stiffener-Enhanced Steel-Concrete-Steel Sandwich Panels Subjected to Impact Loading. Journal of Building Engineering , 45, Article 103479. https://doi.org/10.1016/j.jobe.2021.103479
Xiong, F., Zheng, C., Liu, Y., Bian, Y. and Wang, Y. (2025) Deflection Function of a Novel Bolt-Connected Precast Concrete Floor. Engineering Structures , 323, Article 119250. https://doi.org/10.1016/j.engstruct.2024.119250
Al-Rubaye, S., Sorensen, T., Thomas, R.J. and Maguire, M. (2019) Generalized Beam–spring Model for Predicting Elastic Behavior of Partially Composite Concrete Sandwich Wall Panels. Engineering Structures , 198, Article 109533. https://doi.org/10.1016/j.engstruct.2019.109533
Xiong, F., Bian, Y., Liu, Y., Ge, Q. and Deng, C. (2024) Data-Driven Prediction Method for Flexural Performance of ECC Composite Sandwich Panels. Structures , 70, Article 107524. https://doi.org/10.1016/j.istruc.2024.107524
Ke, L., Wu, X., Yan, B., Li, W. and Li, Y. (2024) Flexural Performance of UHPC Sandwich Panels with UHPC-Filled Stainless Steel Pipe Shear Connectors. Structures , 70, Article 107721. https://doi.org/10.1016/j.istruc.2024.107721
Meng, Y. (2023) Shear Resistance and Deflection Prediction of Steel-Concrete-Steel Sandwich Panel with Headed Stud Connectors. Structures , 54, 1690-1704. https://doi.org/10.1016/j.istruc.2023.05.135
Gad, M.A., Nikbakht, E., Faez, M., Rusydan, A. and Abu Bakar, N.B. (2023) Structural Performance of Sandwich Steel-Concrete-Steel Composites Utilising Engineered Cementitious Composites. Structures , 55, 545-556. https://doi.org/10.1016/j.istruc.2023.06.067
Chakraborty, S., Reddy, S. and Subramaniam, K.V.L. (2021) Experimental Evaluation and Analysis of Flexural Response of Sandwich Beam Panels with an Expanded Polystyrene Core. Structures , 33, 3798-3809. https://doi.org/10.1016/j.istruc.2021.06.088
Kanchanadevi, A.K., Ramanjaneyulu, K. and Srinivas, V. (2021) Behaviour of Concrete Composite Slabs with Truss Type Shear Connectors of Different Orientation Angle. Advances in Structural Engineering , 24, Article 136943322110204.
Zhang, M., Feng, W., Chen, K. and Li, B. (2024) Flexural Behavior of a New Precast Insulation Mortar Sandwich Panel. Applied Sciences , 14, Article 2071. https://doi.org/10.3390/app14052071
Liu, Z., Zhu, J., Zhu, J. and Dai, L. (2025) The Mechanical Properties of Ultra-Low Energy Consumption Precast Concrete Sandwich Wall Panels with Novel GFRP Connectors. Structures , 74, Article 108488. https://doi.org/10.1016/j.istruc.2025.108488
Huang, J., Jiang, Q., Chong, X., Zhao, C. and Wang, Z. (2021) Structural Performance and Section Optimization of Precast Concrete Sandwich Panels with Pin-Type GFRP Connectors. Advances in Structural Engineering , 24, 2351-2363. https://doi.org/10.1177/1369433221999769
Mercedes, L., Bernat-Maso, E. and Gil, L. (2023) Bending and Compression Performance of Full-Scale Sandwich Panels of Hemp Fabric Reinforced Cementitious Matrix. Engineering Structures , 275, Article 115241. https://doi.org/10.1016/j.engstruct.2022.115241
Verma, M., Anandavalli, N., Prakash, A. and Rajasankar, J. (2021) Laced Steel-Concrete Composite Sandwich System in Flexure: Experiments, Analysis and Design. Journal of Sandwich Structures & Materials , 23, 621-651. https://doi.org/10.1177/1099636219842286
Zheng, C., Xiong, F., Liu, Y. and Yu, M. (2023) Study on the Flexural Behavior of Precast Concrete Multi-Ribbed Sandwich Slabs under Different Boundary Conditions. Engineering Structures , 291, Article 116342. https://doi.org/10.1016/j.engstruct.2023.116342
Silva, T., Correia, L., Dehshirizadeh, M. and Sena-Cruz, J. (2022) Flexural Creep Response of Hybrid GFRP-FRC Sandwich Panels. Materials , 15, Article 2536. https://doi.org/10.3390/ma15072536
Gaibor, N., Leitão, D., Briga-Sá, A., Miranda, T., Cristelo, N., Pereira, E.N.B., et al. (2025) Development of Half-Sandwich Panels with Alkali-Activated Ceramic and Slag Wastes: Mechanical and Thermal Characterization. Buildings , 15, Article 1469. https://doi.org/10.3390/buildings15091469
Rahman, S., John, K., Kafle, B. and Al-Ameri, R. (2022) Structural Performance of Modular Sandwich Composite Floor Slabs Containing Basalt FRP-Reinforced Self-Compacting Geopolymer Concrete. Applied Sciences , 12, Article 4246. https://doi.org/10.3390/app12094246
Jeyan Sudhakar, A. and Muthusubramanian, B. (2024) Flexural Response of Textile-Reinforced Sandwich Slab with Modified Polymeric Core. Structures , 59, Article 105679. https://doi.org/10.1016/j.istruc.2023.105679
Yan, D., Wan, H., Chen, A. and Wang, B. (2023) Bending Performance of Concrete Sandwich Walls with Actual Boundary Conditions. Applied Sciences , 13, Article 1229. https://doi.org/10.3390/app13031229
Luebke, J., Pozo-Lora, F.F., Al-Rubaye, S. and Maguire, M. (2023) Out-of-Plane Flexural Behavior of Insulated Wall Panels Constructed with Large Insulation Thicknesses. Materials , 16, Article 4160. https://doi.org/10.3390/ma16114160
Liu, P., Xie, S., Liu, L., Luo, A., Zhang, N., He, S., et al. (2022) Research on Bending Performance of Concrete Sandwich Laminated Floor Slabs with Integrated Thermal and Sound Insulation. Coatings , 12, Article 1075. https://doi.org/10.3390/coatings12081075
Lin, J., Zhang, Z., Xu, B., Zhou, C. and Zhang, Z. (2025) Investigating the Static Flexural Properties of Prefabricated Sandwich Panels Utilizing Bamboo Fiber Recycled Aggregate Concrete. Engineering Structures , 326, Article 119558. https://doi.org/10.1016/j.engstruct.2024.119558
Wang, Y., Lu, J., Zhai, X. and Wang, W. (2022) Flexural Behaviours of One-Way Steel-Concrete-Steel Sandwich Panels with Novel Hybrid Connectors: Tests and Analysis. Journal of Constructional Steel Research , 188, Article 107013. https://doi.org/10.1016/j.jcsr.2021.107013
Dai, C., Hou, M., Huang, M. and Yu, H. (2024) Investigation into the Flexural Performance of Novel Precast Sandwich Wall Panels. Materials and Structures , 57, Article No. 221. https://doi.org/10.1617/s11527-024-02482-z
Stark, A. and Hegger, J. (2021) A Calculation Approach for Sandwich Panels with Facings Made of UHPFRC and Pre-Tensioned CFRP Reinforcement. Engineering Structures , 243, Article 112331. https://doi.org/10.1016/j.engstruct.2021.112331
Cheng, N. (2024) Experimental and Theoretical Study on Flexural Performance of Light-Weight Sandwich Panels Using FRP Connectors. Case Studies in Construction Materials , 21, e03947. https://www.sciencedirect.com/science/article/pii/S2214509524010982
Yang, K., Mun, J., Jung, Y., Kim, J., Lee, S. and Choi, Y. (2023) Flexural Behavior of Precast Lightweight Aggregate Concrete Insulation Panels. Journal of Building Engineering , 74, Article 106861. https://doi.org/10.1016/j.jobe.2023.106861