Linear Design Technology of a Subgrade Prefabricated Interlocking Structure
- 1 University of Shanghai for Science and Technology, Shanghai, China
- 2 University of Shanghai for Science and Technology, Shanghai, China
- 3 Shanghai Jinxing Municipal Design Consulting Co., Ltd., Shanghai, China
- 4 Shanghai Pudong Road and Bridge Group Co., Ltd., Shanghai, China
- 5 Shanghai Pudong Road and Bridge Group Co., Ltd., Shanghai, China
Abstract
There is little research on prefabricated subgrade in the field of road engineering. A significant aspect within this domain is the design of road alignments. Considering these factors, this paper specifically addresses the study of design methods for prefabricated interlocking subgrade structures. After analyzing the disadvantages of traditional rectangular prefabricated blocks, inspired by the concept of the short shield method, the paper proposes to adjust the shape of prefabricated blocks to trapezoid. By utilizing AutoCAD, this study simulates the placement of prefabricated blocks under different road alignments and arrangement modes. The corresponding number of prefabricated blocks and pavement layout is calculated based on the linear elements and design principles of various planes and longitudinal sections. The technology for designing prefabricated interlocking subgrade structures presented in this paper can provide valuable insights for the construction of prefabricated subgrades, with potential for wide-ranging application and promotion.
- Zhao, G., Yang, Y., Zhang, H. and Zhang, G. (2019) A Case Study Integrating Field Measurements and Numerical Analysis of High-Fill Slope Stabilized with Cast-In-Place Piles in Yunnan, China. Engineering Geology , 253, 160-170. https://doi.org/10.1016/j.enggeo.2019.03.005
- Sha, M., Liu, P., Gao, J. and Ma, H. (2021) Research Status and Application of Prefabricated Concrete Frame Joints. E 3 S Web of Conferences , 260, Article ID: 03025. https://doi.org/10.1051/e3sconf/202126003025
- Yang, X.R. (2021) Development Status of and Outlook for Construction Technology for Prefabricated Metro Stations in China. Tunnel Construction , 41, 1849-1870.
- Zhang, L., Huang, J.K., Liu, W., Shen, S.J. and Li, Y.G. (2018) Design and Building Method for Fabricated Light-Wood Frame Structures by Building Information Modeling. Journal of Zhejiang University ( Engineering Science ), 52, 1676-1685.
- Li, F., Liu, H. and Wang, Z.J. (2021) Study on Stability of Roadbed in Highway by Prefabricated Composite Structure. Journal of China & Foreign Highway , 41, 12-16.
- Yin, J.M., Jiang, Y. and Dong, X.J. (2020) Standardized Design and Performance Analysis of Prefabricated Construction Temporary Road. IOP Conference Series : Earth and Environmental Science , 525, Article ID: 012046. https://doi.org/10.1088/1755-1315/525/1/012046
- Abdullah, M.A.H., Rashid, N.A., Abdul Rani, A.L. and Omar, M.F. (2020) New High Strength Water Retaining Interlocking Pavers Block for High Mechanical Performing Pavement and Reducing Runoff. IOP Conference Series : Materials Science and Engineering , 743, Article ID: 012025. https://doi.org/10.1088/1757-899x/743/1/012025
- Vaitkus, A., Kleizienė, R., Vorobjovas, V. and Čygas, D. (2019) Mixture Strength Class and Slab Dimensions’ Effect on the Precast Concrete Pavement Structural Performance. The Baltic Journal of Road and Bridge Engineering , 14, 443-471. https://doi.org/10.7250/bjrbe.2019-14.452
- Sadeghi, V. and Hesami, S. (2018) Finite Element Investigation of the Joints in Precast Concrete Pavement. Computers and Concrete , 21, 547-557.
- Bołtryk, M., Falkowski, K. and Pawluczuk, E. (2017) A Report on the Fabrication of Concrete Pavement with the Application of Anionic Bitumen Emulsion. Construc tion and Building Materials , 154, 1004-1014. https://doi.org/10.1016/j.conbuildmat.2017.08.028
- Knapton, J. (1976) The Design of Concrete Block Roads. Cement and Concrete Association.