Recycled Concrete Aggregates: Review Physical, Mechanical, and Durability Characterisation and Comparison with Natural Aggregates — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Recycled Concrete Aggregates: Review Physical, Mechanical, and Durability Characterisation and Comparison with Natural Aggregates
Institut Polytechnique de Saint-Louis (IPSL), Université Gaston Berger, Saint-Louis, Senegal
The progressive depletion of natural aggregate resources and the growing generation of construction and demolition waste (CDW) have intensified global interest in recycled concrete aggregates (RCA) as a sustainable substitute for natural aggregates (NA) in concrete production. This review synthesises quantitative data from more than fifty peer-reviewed studies published between 2012 and 2024, focusing on the physical, mechanical, and durability properties of RCA-based concrete (RAC) compared with natural aggregate concrete (NAC). Key findings indicate that RCA exhibits significantly lower apparent density (1.91 - 2.70 g/cm 3 , average 2.32 g/cm 3 ) and substantially higher water absorption (2% - 15%) than NA (0.5% - 2%). Los Angeles abrasion values for RCA (20% - 45%) are systematically higher than those for NA (15% - 30%), reflecting increased friability attributable to adhered cement mortar (20% - 56% by mass). The compressive strength of RAC at 28 days is reduced by 2.6% - 43% relative to NAC, depending on the replacement ratio, while the modulus of elasticity decreases by up to 30%. In-service durability indicators, carbonation depth, chloride penetration, and freeze-thaw resistance are likewise adversely affected with increasing RCA content. Pretreatment methods, including accelerated carbonation, thermal treatment, and polymer impregnation, substantially improve RCA quality. The use of supplementary cementitious materials (SCMs), particularly ternary blends of Portland cement, Class F fly ash, and metakaolin or silica fume, is the most effective strategy for controlling alkali-silica reactivity (ASR) in RAC and improving overall durability. These consolidated data provide a robust basis for the development of harmonised normative specifications and circular-economy construction practices.
KeywordsRecycled Concrete AggregatesSustainable ConcretePhysical-Mechanical PropertiesDurabilityCircular EconomyConstruction and Demolition WasteAlkali-Silica Reaction
Hasheminezhad, A., King, D., Ceylan, H. and Kim, S. (2024) Comparative Life Cycle Assessment of Natural and Recycled Aggregate Concrete: A Review. Science of the Total Environment , 950, Article ID: 175310. https://doi.org/10.1016/j.scitotenv.2024.175310
Ma, Q., Duan, Z., Wang, J., Yin, G. and Li, X. (2024) Frost Resistance and Improvement Techniques of Recycled Concrete: A Comprehensive Review. Frontiers in Materials , 11, Article ID: 1493191. https://doi.org/10.3389/fmats.2024.1493191
Wu, L., Zhe, S. and Yan, C. (2024) Modification of Recycled Aggregate and Conservation and Application of Recycled Aggregate Concrete: A Review. Construction and Building Materials , 431, Article 136567. https://doi.org/10.1016/j.conbuildmat.2024.136567
Pacheco, J., de Brito, J., Chastre, C. and Evangelista, L. (2019) Experimental Investigation on the Variability of the Main Mechanical Properties of Concrete Produced with Coarse Recycled Concrete Aggregates. Construction and Building Materials , 201, 110-120. https://doi.org/10.1016/j.conbuildmat.2018.12.200
Junior, G.A.F., Leite, J.C.T., Mendez, G.d.P., Haddad, A.N., Silva, J.A.F. and da Costa, B.B.F. (2025) A Review of the Characteristics of Recycled Aggregates and the Mechanical Properties of Concrete Produced by Replacing Natural Coarse Aggregates with Recycled Ones—Fostering Resilient and Sustainable Infrastructures. Infrastructures , 10, Article No. 213. https://doi.org/10.3390/infrastructures10080213
Bui, H., Delattre, F. and Levacher, D. (2023) Experimental Methods to Evaluate the Carbonation Degree in Concrete—State of the Art Review. Applied Sciences , 13, Article 2533. https://doi.org/10.3390/app13042533
Jagadesh, P., Karthik, K., Kalaivani, P., Karalar, M., Althaqafi, E., Madenci, E., et al . (2024) Examining the Influence of Recycled Aggregates on the Fresh and Mechanical Characteristics of High-Strength Concrete: A Comprehensive Review. Sustainability , 16, Article No. 9052. https://doi.org/10.3390/su16209052
Alibeigibeni, A., Stochino, F., Zucca, M. and Gayarre, F.L. (2025) Enhancing Concrete Sustainability: A Critical Review of the Performance of Recycled Concrete Aggregates (RCAs) in Structural Concrete. Buildings , 15, Article No. 1361. https://doi.org/10.3390/buildings15081361
Adams, M.P. and Ideker, J.H. (2020) Using Supplementary Cementitious Materials to Mitigate Alkali-Silica Reaction in Concrete with Recycled-Concrete Aggregate. Journal of Materials in Civil Engineering , 32, Article ID: 04020209. https://doi.org/10.1061/(asce)mt.1943-5533.0003277
Feng, Q., Liu, B., Zhang, Y., Zhang, C. and Wang, D. (2023) Multi-Scale Grading Utilization Based on the Characteristics of Recycled Concrete Aggregates: A Review. Frontiers in Materials , 10, Article ID: 1219075. https://doi.org/10.3389/fmats.2023.1219075
Hameed, R., Un-Nisa, Z., Rizwan Riaz, M. and Ali Gillani, S.A. (2022) Effect of Compression Casting Technique on the Water Absorption Properties of Concrete Made Using 100% Recycled Aggregates. Revista de la Construcción , 21, 387-407. https://doi.org/10.7764/rdlc.21.2.387
Alqarni, A.S., Abbas, H., Al-Shwikh, K.M. and Al-Salloum, Y.A. (2022) Influence of Treatment Methods of Recycled Concrete Aggregate on Behavior of High Strength Concrete. Buildings , 12, Article No. 494. https://doi.org/10.3390/buildings12040494
Poon, C.S., Shui, Z.H., Lam, L., Fok, H. and Kou, S.C. (2004) Influence of Moisture States of Natural and Recycled Aggregates on the Slump and Compressive Strength of Concrete. Cement and Concrete Research , 34, 31-36. https://doi.org/10.1016/s0008-8846(03)00186-8
Lima, C., Caggiano, A., Faella, C., Martinelli, E., Pepe, M. and Realfonzo, R. (2013) Physical Properties and Mechanical Behaviour of Concrete Made with Recycled Aggregates and Fly Ash. Construction and Building Materials , 47, 547-559. https://doi.org/10.1016/j.conbuildmat.2013.04.051
Abed, M. and Nemes, R. (2019) Long-Term Durability of Self-Compacting High-Performance Concrete Produced with Waste Materials. Construction and Building Ma terials , 212, 350-361. https://doi.org/10.1016/j.conbuildmat.2019.04.004
Silva, R.V., de Brito, J. and Dhir, R.K. (2016) Establishing a Relationship between Modulus of Elasticity and Compressive Strength of Recycled Aggregate Concrete. Journal of Cleaner Production , 112, 2171-2186. https://doi.org/10.1016/j.jclepro.2015.10.064
Jayasuriya, A., Adams, M.P. and Bandelt, M.J. (2018) Understanding Variability in Recycled Aggregate Concrete Mechanical Properties through Numerical Simulation and Statistical Evaluation. Construction and Building Materials , 178, 301-312. https://doi.org/10.1016/j.conbuildmat.2018.05.158
Adams, M.P., Fu, T., Cabrera, A.G., Morales, M., Ideker, J.H. and Isgor, O.B. (2016) Cracking Susceptibility of Concrete Made with Coarse Recycled Concrete Aggregates. Construction and Building Materials , 102, 802-810. https://doi.org/10.1016/j.conbuildmat.2015.11.022
Kou, S.C., Poon, C.S. (2013) Long-Term Mechanical and Durability Properties of Recycled Aggregate Concrete Prepared with the Incorporation of Fly Ash. Cement and Concrete Composites , 37, 12-19. https://doi.org/10.1016/j.cemconcomp.2012.12.011
Adams, M.P., Jones, A., Beauchemin, S., Johnson, R., Fournier, B., Shehata, M., et al . (2013) Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates. Advances in Civil Engineering Materials , 2, 78-96. https://doi.org/10.1520/acem20120030
Jayasuriya, A., Shibata, E.S., Chen, T. and Adams, M.P. (2021) Development and Statistical Database Analysis of Hardened Concrete Properties Made with Recycled Concrete Aggregates. Resources , Conservation and Recycling , 164, Article ID: 105121. https://doi.org/10.1016/j.resconrec.2020.105121
Jayasuriya, A., Bandelt, M.J. and Adams, M.P. (2022) Stochastic Mesoscopic Modeling of Concrete Systems Containing Recycled Concrete Aggregates Using Monte Carlo Methods. ACI Materials Journal , 119, 3-18.
Jayasuriya, A., Adams, M.P. and Bandelt, M.J. (2020) Generation and Numerical Analysis of Random Aggregate Structures in Recycled Concrete Aggregate Systems. Journal of Materials in Civil Engineering , 32, Article ID: 04020044. https://doi.org/10.1061/(asce)mt.1943-5533.0003113