Investigating the Local Granulated Blast Furnace Slag
- 1 Department of Civil Engineering, University Mentouri, Constantine, Algeria
- 2 Department of Civil Engineering, University Mentouri, Constantine, Algeria
- 3 Department of Civil Engineering, University Mentouri, Constantine, Algeria
Abstract
The promotion of blast furnaces slag in construction industry aims at protecting the environment, fighting against the nuisance such as waste dumps and promoting local products. The use of granulated slag as a part replacement of Portland cement or in the production of clinker free binder constitutes a valuable outlet for this product. The aim of this study is the characterization of local granular slag using various techniques such as chemical analysis, X ray diffraction, differential thermal analysis, infrared spectrometry, and conductimetry. These methods provide a clearer understanding of the vitreous structure of this type of slag and also provide clues as to the nature of its hydraulic reactivity. Mechanical tests have been carried out using 4 × 4 × 16 cm3 prismatic mortars using a composition activated by the clinker, varying the fineness of slag, its content and the nature of clinkers. Results obtained show that this type of slag is reactive, the evolution of its mechanical resistance depends on its fineness, and that long-term mechanical performance is of great interest.
- ASTM, “Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars, ASTM C 989-99,” American Society for Testing and Materials, West Conshohocken, Pa. ASTM C989, 1999, p. 5.
- L. Alexandre and J. L. Sebilleau, “Le Laitier de Haut Fourneau,” Centre Technique et de Promotion des Laitiers, Paris, 1988, p. 340.
- S. Ak?a?zo?lu and C. D. Ati?, “Effect of Granulated Blast Furnace Slag and Fly Ash Addition on the Strength Properties of Lightweight Mortars Containing Waste PET Aggregates,” Construction and Building Materials, Vol. 25, 2011, pp. 4052-4058. doi:10.1016/j.conbuildmat.2011.04.042
- S. Kumar, R. Kumar, A. Bandopadhyay, T. C. Alex, B. R. Kumar, S. K. Das and S. P. Mehrotra, “Mechanical Activation of Granulated Blast Furnace Slag and It Effect on the Properties and Structure of Portland Slag,” Cement and Concrete Composites, Vol. 30, No. 8, 2008, pp. 679- 685. doi:10.1016/j.cemconcomp.2008.05.005
- H. G. Smolczyk, “Slags Structure and Typology,” 7th In- ternational Conference on Cement Chemistry, Paris, Vol. 3, 1980, pp. 1-3.
- A. Ouili, “Contribution to Blast Furnaces Alkaline Activation,” Ph.D. Thesis, INSA de Lyon, Lyon, 1994, p. 153.
- V. Cervantes and J. Roesler, “Ground Granulated Blast Furnace Slag,” Technical Note, Center of Excellence for Airport Technology, 2007, pp. 1-4
- F. Sajedi and H. A. Razak, “Effects of Thermal and Mechanical Activation Methods on Compressive Strength of Ordinary Portland Cement—Slag Mortar,” Materials & Design, Vol. 32, No. 2, 2011, pp. 984-995. doi:10.1016/j.matdes.2010.08.038
- E. Douglas, A. Bilodeau and V. M. Malhotra, “Properties and Durability of Alkali-Activated Slag Concrete,” ACI Materials Journal, Vol. 89, No. 5, 1992, pp. 509-516.
- E. Von, “Slags Structure and the hydration of Cements: Discussions and Conclusions,” 7th International Conference on Cement Chemistry, Paris, Vol. IV, 1980, pp. 1-3.
- M. Ferreira, G. Liu, L. Nilson and O. C. Gjorv, “Blast Furnace Slag Cement for Concrete Durability in Marine Environment,” Consec’04, Seoul, 23 June 2004, pp. 109- 116.
- F. Hawthorn, “Blast-Furnace Slags and Clinkers-Mutual Influences,” 7ème Congrès International de la Chimie des Ciments, Vol. 2, 1980, pp. 144-149.
- D. G. Mantel, “Investigation into the Hydraulic Activity of Five Granulated Blast Furnace Slags with Eight Different Portland Cements,” ACI Material Journal, Vol. l, No. 91, 1994, pp. 471-477.