A Comparative Study of Concretes Containing Crushed Limestone Sand and Natural Sand
- 1 School of Architecture & Civil Eng., Kyungpook National University, Daegu, Korea
- 2 Department of Architecture, Chosun University, Gwangju, Korea
Abstract
This paper describes the effects of high temperatures on the strength characteristic of crushed limestone sand concrete (CLSC). To compare, natural (river) sand concrete (NSC) and CLSC specimens were exposed to the three different high temperatures. Visual color-change and weight loss were also carefully examined through the tests. The test results indicated that the decreasing rate of compressive strength of CLSC after exposure to high temperature is slightly lower than that of NSC while the splitting tensile strength of CLSC indicated a very similar rate compared to NSC. Therefore, the strength variations of crushed limestone sand concrete after exposal to high temperature can be similarly treated as that of the natural sand concrete. Also it can be seen that the CLSC can use 0.5 power law equation to represent the relationship between compressive and splitting tensile strength before and after exposal to high temperature.
- P. Poitevin, “Limestone Aggregate Concrete, Usefulness and Durability,” Cement and Concrete Composites, Vol. 21, No. 11, 1999, pp. 99-105.
- I. K. Netinger and Ivica Guljas, “The Effects of High Temperatures on the Mechanical Properties of Concrete Made with Different Types of Aggregates,” Fire Safety Journal, Vol. 46, No. 7, 2011, pp. 425-430. doi:10.1016/j.firesaf.2011.07.002
- Z. Xing, A. L. Beaucour, R. Hebert, A. Noumowe and B. Ledesert, “Influence of the Nature of Aggregates on the Behaviour of Concrete Subjected to Elevated Temperature,” Cement and Concrete Research, Vol. 41, No. 4, 2011, pp. 392-402. doi:10.1016/j.cemconres.2011.01.005
- K. Akrout, P. Mounanga, M. Ltifi and N. Jamaa, “Rheological, Mechanical and Structural Performances of Crushed Limestone Sand Concrete,” International Journal of Concrete Structures and Materials, Vol. 4, No. 2, 2010, pp. 97-104.
- J. K. Kim, C. S. Lee, C. K. Park and S. H. Eo, “The Fracture Characteristics of Crushed Limestone Sand Concrete,” Cement and Concrete Research, Vol. 27, No. 11, 1997, pp. 1719-1729. doi:10.1016/S0008-8846(97)00156-7
- T. Celik and K. Marar, “Effects of Crushed Stone Dust on Some Properties of Concrete,” Cement and Concrete Research, Vol. 26, No. 7, 1996, pp. 1121-1130. doi:10.1016/0008-8846(96)00078-6
- B. K. Menadi, S. Khatib and A. A?t-Mokhtar, “Strength and Durability of Concrete Incorporating Crushed Limestone Sand,” Construction and Building Materials, Vol. 23, No. 2, 2009, pp. 625-633. doi:10.1016/j.conbuildmat.2008.02.005
- Y. Choi and R. L. Yuan, “Experimental Relationship Between Splitting Tensile Strength and Compressive Strength of GFRC and PFRC,” Cement and Concrete Research, Vol. 35, No. 8, 2005, pp. 1578-1591. doi:10.1016/j.cemconres.2004.09.010
- B. Ostle, K. V. Turner, C. R. Hicks and G. W. Mcelrath, “Engineering Statistics: The Industrial Experience,” Duxbury Press, Pacific Grove, 1999.