High Performance concrete (HPC) has received increased attention in the development of infrastructure Viz., Buildings, Industrial Structures, Hydraulic Structures, Bridges and Highways etc. leading to utilization of large quantity of concrete. This paper presents a comprehensive coverage of High Performance concrete developments in civil engineering field. It highlights the High Performance concrete features and requirements over conventional concrete. Furthermore, recent trends with regard to High Performance Concrete development in this area are explored. This paper also includes effect of Mineral and Chemical Admixtures used to improve performance of concrete.
[1] A. Kmita, “A New Generation of Concrete in Civil Engineering,” Journal of Materials Processing Technology, Vol. 106, No. 1-3, 2000, pp.80-86. doi:10.1016/S0924-0136(00)00642-7
M. J. Shannag and H. A. Shaia, “Sulfate Resistance of High-Performance Concrete”, Cement & Concrete Composites, Vol. 25, No. 3, 2003, pp. 363-369. doi:10.1016/S0958-9465(02)00049-5
N. V. Ramana, K. Gnaneswar, C. Sashidhar and T. Naresh Kumar, “Behavior of High Performance Concrete Two Way Slabs in Punching Shear”, International Journal of Science and Advanced Technology, Vol. 2, No. 3, 2012, pp. 122-126.
P. Muthupriya, K. Subramanian and B. G. Vishnuram, “Experimental Investigation on High Performance Rein forced Concrete Column with Silica Fume and Fly Ash as Admixtures”, Asian Journal of Civil Engineering (Building and Housing), Vol. 12, No. 5, 2011, pp. 597-618.
S. A. Al-Mishhadani, W. A. Al-Qaisi and S. F. Al-Khafaji, “Predicting Mechanical Properties of High Performance Concrete by Using Non-Destructive Tests,” Journal of Engineering & Technology, Vol. 27, No. 3, 2009, pp. 425-444.
B. B. Patil and P. D. Kumbhar, “Strength and Durability Properties of High Performance Concrete Incorporating High Reactivity Metakaolin,” International Journal of Modern Engineering Research, Vol. 2, No. 3, 2012, pp. 1099-1104.
V. G. Ghorpade and H. S. Rao, “Chloride Ion Perme ability Studies of Metakaolin Based High Performance Concrete,” International Journal of Engineering Science and Technology ,Vol. 3, No. 2, 2011, pp. 1617-1623.
S. Bhanja and B. Sengupta, “Influence of Silica Fume on the Tensile Strength of Concrete,” Cement and Concrete Research, Vol. 35, No. 4, 2005, pp. 743-747. doi:10.1016/j.cemconres.2004.05.024
K. Yildiz and L. O. Ugur, “Examination of Durablity of High Performance Concrete (hpc) That Has Been Subjected to MgSO4 and NaCl Corros?on against Freezing and Thawing,” Scientific Research and Essay, Vol. 4, No. 9, 2009, pp. 929-935.
A. I. Laskar and S. Talukdar, “Rheological Behavior of High Performance Concrete with Mineral Admixtures and Their Blending,” Construction and Building Materials, Vol. 22, No. 12, 2008, pp. 2345-2354. doi:10.1016/j.conbuildmat.2007.10.004
A. H. Memon, S. S. Radin, M. F. M. Zain and J. F. Trot tier, “Effects of Mineral and Chemical Admixtures on High-Strength Concrete in Seawater,” Cement and Concrete Research, Vol. 32, No. 3, 2002, pp. 373-377. doi:10.1016/S0008-8846(01)00687-1
I. R. F. Martins and J. L. Akasaki, “Study of Compressive Strength of High Performance Concrete Added with Tire Rubber”, Materials Compuestos, 2005, pp. 1-8.
V. Malagavelli and P. N. Rao, “High Performance Concrete with Ggbs and Robo Sand,” International Journal of Engineering Science and Technology, Vol. 2, No. 10, 2010, pp. 5107-5113.
K. Pazhani and R. Jeyaraj, “Study on Durability of High Performance Concrete with Industrial Wastes,” Applied Technologies & Innovations, Vol. 2, No. 2, 2011, pp. 19-28.
J. A. Peter, M. Neelamegam, J. K. Dattatreya, N. P. Rajamane and S. Gopalkrishnan, “Utilisation of Flyash as Cement Replacement Material to Produce High Performance Concrete”, In: B. Cltatterjee, K. K. Singh & N. G. Goswami, Eds., Fly Ash Utilisation for Value Added Pro ducts, 1999, pp. 38-49.
A. Camoes, B. Aguiar and S. Jalali, “Durability of Low Cost High Performance Fly Ash Concrete,” International Ash Utilization Symposium, Center for Applied Energy Research, University of Kentucky, Paper 43, 2003.
H. H. Nassif , H. Najm and N. Suksawang, “Effect of Pozzolanic Materials and Curing Methods on the Elastic Modulus of HPC,” Cement & Concrete Composites, Vol. 27, No. 6, 2005, pp. 661-670. doi:10.1016/j.cemconcomp.2004.12.005
E. Vejmelkova, M. Keppert , P. Rovnanikova, M. Ondracek, Z. Kersner and R. Cerny, “Properties of High Performance Concrete Containing Fine-Ground Ceramics as Supplementary Cementitious Material,” Cement & Concrete Composites, Vol. 34, No. 1, 2012, pp. 55-61. doi:10.1016/j.cemconcomp.2011.09.018
K. E. Hassan, J. G. Cabrera and R. S. Maliehe, “The Effect of Mineral Admixtures on the Properties of High Performance Concrete,” Cement & Concrete Composites, Vol. 22, No. 4, 2000, pp. 267-271. doi:10.1016/S0958-9465(00)00031-7
G. Li and X. Zhao, “Properties of Concrete Incorporating Fly Ash and Ground Granulated Blast-Furnace Slag,” Cement & Concrete Composites, Vol. 25, No. 3, 2003, pp. 293-299. doi:10.1016/S0958-9465(02)00058-6
A. Shukla, C. K. Singh and A. Sharma, “Study of the Properties of Concrete by Partial Replacement of Ordinary Portland Cement by Rice Husk Ash,” International Journal of Earth Sciences and Engineering, Vol. 4, No. 6, 2011, pp. 965-968.
M. F. M. Zain, H. B. Mahmud, A. Ilham and M. Faizal, “Prediction of Splitting Tensile Strength of High-Performance Concrete,” Cement and Concrete Research, Vol. 32, No. 8, 2002, pp. 1251-1258. doi:10.1016/S0008-8846(02)00768-8
K. Wu, B. Chen, W. Yao and D. Zhang, “Effect of Coarse Aggregate Type on Mechanical Properties of High-Performance Concrete,” Cement and Concrete Research, Vol. 31, No. 10, 2001, pp. 1421-1425. doi:10.1016/S0008-8846(01)00588-9
T. T. Le, S. A. Austin, S. Lim, R. A. Buswell, R. Law, A. G. F. Gibb and T. Thorpe, “Hardened Properties of High Performance Printing Concrete,” Cement and Concrete Research, Vol. 42, No. 3, 2012, pp. 558-566. doi:10.1016/j.cemconres.2011.12.003
B. K. Raghu Prasad, H. Eskandari and B. V. Venkatarama Reddy, “Prediction of Compressive Strength of SCC and HPC with High Volume Fly Ash Using ANN,” Construction and Building Materials, Vol. 23, No. 1, 2009, pp. 117-128. doi:10.1016/j.conbuildmat.2008.01.014
C. Wang, C. Yang, F. Liu, C. Wan and X. Pu, “Prepa ration of Ultra-High Performance Concrete with Common Technology and Materials,” Cement & Concrete Compo sites, Vol. 34, No. 4, 2012, pp. 538-544. doi:10.1016/j.cemconcomp.2011.11.005
S. P. Shah and W. J. Weiss, “High Performance Concrete: Strength, Permeability and Shrinkage Cracking,” International Symposium on High Performance Concrete, 2000, pp. 331-340.
P. H. Hanh and N. V. Tuan, “High Performance Concrete Used for Marine Gravity Concrete Works,” The 3rd ACF International Conference, 2008, pp. 598-606.
A. Elahi, P. A. M. Basheer, S. V. Nanukuttan and Q. U. Z. Khan, “Mechanical and Durability Properties of High Performance Concretes Containing Supplementary Cementitious Materials,” Construction and Building Materials, Vol. 24, No. 3, 2010, pp. 292-299. doi:10.1016/j.conbuildmat.2009.08.045
E. Vejmelkova, M. Keppert, P. Rovnanikova, M. Ondracek, Z. Kersner and R. Cerny, “Properties of High Performance Concrete Containing Fine Ground Ceramics as Supplementary Cementitious Material,” Cement & Concrete Composites, Vol. 34, No. 1, 2012, pp. 55-61. doi:10.1016/j.cemconcomp.2011.09.018
H. S. Wong and H. A. Razak, “Efficiency of Calcined Kaolin and Silica Fume as Cement Replacement Material for Strength Performance,” Cement and Concrete Research, Vol. 35, No. 4, 2005, pp. 696-702. doi:10.1016/j.cemconres.2004.05.051
H. Z. Lopez-Calvo, P. Montes-Garcia, T. W. Bremner, M. D. A. Thomas and V. G. Jiménez-Quero, “Compressive Strength of HPC Containing CNI and Fly Ash after Long-Term Exposure to a Marine Environment,” Cement & Concrete Composites, Vol. 34, No. 1, 2012, pp. 110-118. doi:10.1016/j.cemconcomp.2011.08.007
D. Xu, B. S. Divsholi, D. T. Y. Lim and S. Teng, “Mechanical Properties and Durability of High Performance Concrete Incorporating Ultra Fine Slag and Undensified Silica Fume,” 36th Conference on Our World in Concrete & Structures Singapore, 14-16 August 2011, pp. 1-10.
K. S. Al-Jabri, M. Hisada, S. K. Al-Oraimi and A. H. Al-Saidy, “Copper Slag as Sand Replacement for High Performance Concrete,” Cement & Concrete Composites, Vol. 31, No. 7, 2009, pp. 483-488. doi:10.1016/j.cemconcomp.2009.04.007
V. G. Ghorpade and H. S. Rao, “Chloride Ion Perme ability Studies of Metakaolin Based High Performance Concrete,” International Journal of Engineering Science and Technology, Vol. 3, No. 2, 2011, pp. 1617-1623.
H. S. Rao, H. M. Somasekharaiah and V. G. Ghorpade, “Strength and Workability Characteristics of Fly Ash Based Glass Fibre Reinforced High Performance Con crete,” International Journal of Engineering Science and Technology, Vol. 3, No. 8, 2011, pp. 6266-6277.
S. W. Yoo, S. J. Kwon and S. H. Jung, “Analysis Technique for Autogenous Shrinkage in High Performance Concrete with Mineral and Chemical Admixtures,” Construction and Building Materials, Vol. 34, 2012, pp. 1-10. doi:10.1016/j.conbuildmat.2012.02.005
J. Brozovsky, D. Prochazka and D. Benes, “Determination of High Performance Concrete Strength by Means of Impact Hammer,” The 10th International Conference of the Slovenian Society for Non-Destructive Testing, Ljubl jana, 1-3 September, 2009, pp. 233-241.
A. N. Noumowe, R. Siddique and G. Debicki, “Perme ability of High-Performance Concrete Subjected to Elevated Temperature (600?C),” Construction and Building Materials, Vol. 23, No. 5, 2009, pp. 1855-1861. doi:10.1016/j.conbuildmat.2008.09.023
K. M. A. Hossain and M. Lachemi, “Strength, Durability and Micro-Structural Aspects of High Performance Volcanic Ash Concrete,” Cement and Concrete Research, Vol. 37, No. 5, 2007, pp. 759-766. doi:10.1016/j.cemconres.2007.02.014
R. A. Einsfeld and M. S. L. Velasco, “Fracture Parameters for High-Performance Concrete,” Cement and Concrete Research, Vol. 36, No. 3, 2006, pp. 576-583. doi:10.1016/j.cemconres.2005.09.004
H.-S. Shi, B.-W. Xu and X.-C. Zhou, “Influence of Mineral Admixtures on Compressive Strength, Gas Perme ability and Carbonation of High Performance Concrete,” Construction and Building Materials, Vol. 23, No. 5, 2009, pp. 1980-1985. doi:10.1016/j.conbuildmat.2008.08.021
E. H. Kadri, S. Aggoun, S. Kenai and A. Kaci, “The Compressive Strength of High-Performance Concrete and Ultrahigh-Performance,” Advances in Materials Science and Engineering, Vol. 2012, 2012, Article ID: 361857. doi:10.1155/2012/361857
P. D. Kumbhar and P. B. Murnal, “Assessment of Suit ability of Existing Mix Design Methods of Normal Concrete for Designing High Performance Concrete Mixes,” International Journal of Civil and Structural Engineering , Vol. 3, No. 1, 2012, pp. 158-167.
A. Laskar, “Mix Design of High-Performance Concrete,” Materials Research, Vol. 14, No. 4, 2011, pp. 429-433. doi:10.1590/S1516-14392011005000088
M. F. M. Zain, M. N. Islam and I. H. Basri, “An Expert System for Mix Design of High Performance Concrete,” Advances in Engineering Software, Vol. 36, No. 5, 2005, pp. 325-337. doi:10.1016/j.advengsoft.2004.10.008
P. S. Kumar, M. A. Mannan and K. V. John, “High Performance Reinforced Concrete Beams made with Sand stone Reactive Aggregates,” The Open Civil Engineering Journal, Vol. 36, No. 5, 2008, pp. 41-50.
N. Mahde, A. Jalawi and D. S. Atwan, “Effect of Kerosene and Gasoline on Some Properties of High Performance Concrete,” Journal of Engineering, Vol. 17, No. 6, 2011, pp. 1643-1657.
S. K. Roy, H. Sugiharto, A. Kristanto and S. Himawan, “Systematic Formulation of High Performance Concrete Pavement,” Civil Engineering Dimension, Vol. 7, No. 2, 2005, pp. 57-60.
P. Ramadoss and K. Nagamani, “Tensile Strength and Durability Characteristics of High Performance Fiber Reinforced Concrete,” The Arabian Journal for Science and Engineering, Vol. 33, No. 2, 2008, pp. 307-319.
K. Arunachalam and R. Gopalakrishnan, “Experimental Investigation on High Performance Fly Ash Concrete in Normal and Aggressive Environment,” 29th Conference on Our World in Concrete & Structures, Singapore City, 25-26 August 2004, pp. 181-188.
M. M Y. El Shikh, “Economy of Using High Performance Concrete in Columns,” 33rd Conference on Our World in Concrete & Structures, Singapore, 25-27 August 2008, pp. 1-8.
V. G. Ghorpade, “An Experimental Investigation on Glass Fibre reinforced High Performance Concrete with Silicafume as Admixture,” 35th Conference on Our World in Concrete & Structures, Singapore, 25-27 August 2010, pp. 1-8.
S. A. Al. Sheikh, “Mechanical Properties for High Per formance Concrete Exposed to High Temperature,” International Journal of Civil and Structural Engineering, Vol. 2, No. 2, 2011, pp. 534-444.
K. Perumal and R. Sundararajan, “Effect of Partial Re placement of Cement with Silica Fume on the Strength and Durability Characteristics of High Performance Concrete,” 29th Conference on Our World in Concrete & Structures, Singapore, 25-26 August 2004, pp. 397-404.
M. F. Mohd Zain and S. S. Radin, “Physical Properties of High-Performance Concrete with Admixtures Exposed to a Medium Temperature Range 20?C to 50?C,” Cement and Concrete Research, Vol. 30, No. 8, 2000, pp. 1283 1287. doi:10.1016/S0008-8846(00)00294-5
A. Salas, S. Delvasto, R. Mejia de Gutierrez and D. Lange, “Comparison of Two Processes for Treating Rice Husk Ash for Use in High Performance Concrete,” Cement and Concrete Research, Vol. 39, No. 9, 2009, pp. 773-778. doi:10.1016/j.cemconres.2009.05.006
G. Long, X. Wang and Y. Xie, “Very-High-Performance Concrete with Ultrafine Powders,” Cement and Concrete Research, Vol. 32, No. 4, 2002, pp. 601-605. doi:10.1016/S0008-8846(01)00732-3
M. I. Khan, “Permeation of High Performance Concrete,” Journal of Materials in Civil Engineering, Vol. 15, No. 1, 2003, pp. 84-92. doi:10.1061/(ASCE)0899-1561(2003)15:1(84)
A. K. Tamini, “High Performance Concrete Mix for an Optimum Protection in Acidic Conditions,” Materials and Structures, Vol. 30, No. 3, 1997, pp. 188-191. doi:10.1007/BF02486392
K. O. Kjellsen, O. H. Wallevik and M. Hallgren, “On the Compressive Strength Development of High Performance Concrete and Paste Effect of Silica Fume,” Materials and Structures, Vol. 32, No. 1, 1999, pp. 63-69. doi:10.1007/BF02480414
K. O. Kjellsen, M. Hallgren and O. H. Wallevik, “Fracture Mechanical Properties of High Performance Concrete—Influence of Silica Fume,” Materials and Structures, Vol. 33, No. 9, 2000, pp. 552-558. doi:10.1007/BF02480535
H. Kada, M. Lachemi, N. Petrov, O. Bonneau and P.-C. Aitcin, “Determination of the Coefficient of Thermal Expansion of High Performance Concrete from Initial Set ting,” Materials and Structures, Vol. 35, No. 1, 2002, pp. 35-41. doi:10.1007/BF02482088
C. S. Poon, S. C. Kou and L. Lam, “Pore Size Distribution of High Performance Metakaolin Concrete,” Journal of Wuhan University of Technology-Mater. Sci. Ed., Vol. 17, No. 1, 2002, pp. 42-46.
C.-S. Jiang, L.-N. Lu, S.-B. Guan, Q.-J. Ding and S.-G. Hu, “Preparation of High Performance Non-Dispersible Concrete,” Journal of Wuhan University of Technology Mater. Sci. Ed., Vol. 19, No. 2, 2004, pp. 67-69
Z. H. Pan, F. Hiromi and T. H. Wee, “Preparation of High Performance Foamed Concrete from Cement, Sand and Mineral Admixtures,” Journal of Wuhan University of Technology-Mater. Sci. Ed., Vol. 22, No. 2, 2007, pp. 295-298. doi:10.1007/s11595-005-2295-4
J. F. Lü, H. Guan, W. X. Zhao and H. J. Ba, “Compressive Strength and Permeability of High-Performance Concrete,” Journal of Wuhan University of Technology-Mater. Sci. Ed., Vol. 26, No. 1, 2011, pp. 137-141.
P. Montes, W. Theodore and B. F. Castellanos, “Interactive Effects of Fly Ash and CNI on Corrosion of Reinforced High-Performance Concrete,” Materials and Structures, Vol. 39, No. 2, 2006, pp. 201-210. doi:10.1617/s11527-005-9026-3
E. Guneyisi and M. Gesoglu, “A Study on Durability Properties of High-Performance Concretes Incorporating High Replacement Levels of Slag,” Materials and Structures, Vol. 41, No. 3, 2008, pp. 479-493. doi:10.1617/s11527-007-9260-y
G. C. Cordeiro, R. D. T. Filho and E. M. Rego Fairbairn, “Use of Ultrafine Rice Husk Ash with High-Carbon Con tent as Pozzolan in High Performance Concrete,” Materials and Structures, Vol. 42, No. 7, 2009, pp. 983-992. doi:10.1617/s11527-008-9437-z
O. Mazanec, D. Lowke and P. Schie, “Mixing of High Performance Concrete: Effect of Concrete Composition and Mixing Intensity on Mixing Time,” Materials and Structures, Vol. 43, No. 7, 2010, pp. 357-365. doi:10.1617/s11527-009-9494-y
S.-D. Hwang, K. H. Khayat and D. Youssef, “Effect of Moist Curing and Use of Lightweight Sand on Characteristics of High-Performance Concrete,” Materials and Structures, Vol. 46, No. 1-2, 2013, pp. 35-46. doi:10.1617/s11527-012-9881-7
P. C. Aitcin, “High-Performance Concrete,” Taylor & Francis e-Library, 2004.
K. Chinnaraju, K. Subramanian and S. R. R. Senthilku mar, “Strength Properties of HPC Using Binary, Ternary and Quaternary Cementitious Blends,” Structural Concrete, Vol. 11, No. 4, 2010, pp. 191-198. doi:10.1680/stco.2010.11.4.191