Recovery and Use of Blast Furnace Slag in the Field of Road Construction in Algeria
- 1 Department of Civil Engineering, Constantine 1 University, Constantine, Algeria
- 2 Department of Civil Engineering, Constantine 1 University, Constantine, Algeria
- 3 Department of Civil Engineering, Constantine 1 University, Constantine, Algeria
- 4 Department of Civil Engineering, Constantine 1 University, Constantine, Algeria
Abstract
Waste and industrial by-products represent a significant percentage of the industrial landfill. The evaluation of these products has a dual effect: it avoids both the landfill (risk of environmental pollution) and limits the use of natural aggregates (depletion of natural resources and landscape fragmentation and the imbalance of the ecosystem). In recent years, applications for industrial waste have been taken into account in the construction of roads with a great interest in many industrialized countries and developing countries. The use of these materials in the construction of the road is a decision based on technical, economic and ecological criteria. In Algeria , the steel plant of El-Hadjar ( Annaba ), due to its activity generates a significant industrial waste (slag) which creates a storage problem and pollution. For industrialized countries, this product is an abundant raw material at low cost that must be used on a large scale public works. Our study implies the use of slag in the preparation of the subgrade and surface course (as coated). The results of chemical, physical and mechanical analyses of El-Hadjar slag and materials developed, compared to those of natural aggregates, can be used as aggregate in road construction.
- T. Sen and U. Mishra, “Usage of Industrial Waste Prod ucts in Village Road Construction,” International Journal of Environmental Science and Development, Vol. 1, No. 2, 2010, pp. 122-126.
- M. A. Elgharbi and R. Znaidi, “Valorisation des Scories d’Acierie Eléctrique Pour l’Entretien des Routes Rurales,” Revue HTE, Vol. 7, No.134, 2006, pp. 45-50.
- P. Chaurand, J. Rose, V. Briois, L. Olivi, J.-L. Hazemann, O. Proux, J. Domas and J.-Y. Bottero, “Environmental Impacts of Steel Slag Reused in Road Construction: A Crystallographic and Molecular (XANES),” Journal of Hazardous Materials, Vol. 139, No. 3, 2007, pp. 537-542. doi:10.1016/j.jhazmat.2006.02.060
- W. Shena, M. Zhoua, W. Mab, J. Hub and Z. Caib, “In vestigation on the Application of Steel Slag—Fly Ash— Phosphogypsum Solidi?ed Material as Road Base Material,” Journal of Hazardous Materials, Vol. 173, No. 1, 2010, pp. 468-473.
- D. Durincka, F. Engstromb, S. Arnouta, J. Heulensa, P. T. Jonesa, B. Bjorkmanb, B. Blanpaina and P. Wollants, “Hot Stage Processing of Metallurgical Slags,” Conservation and Recycling, Vol. 52, No. 10, 2008, pp. 1121-1131.
- L. Roth and M. Eklund, “Environmental Evaluation of Reuse of By-Products as Road Construction Materials in Sweden,” Waste Management, 2003, pp. 107-116. www.elsevier.com/locate/wasman
- D. Qiao, J. S. Qian, Q. Z. Wang, Y. D. Dang, H. Zhang and D. Q. Zeng, “Utilization of Sulfate-Rich Solid Wastes in Rural Road Construction in the “Three Gorges Reservoir for Rural Road Construction,” Conservation and Recycling, Vol. 54, No. 12, 2010, pp. 1368-1376.
- “Direction de la Recherche et de la Perspective,” Ministère des Travaux Publique, Algérie. www.mtp.gov.dz/drp.htm
- J. Sorvari, “Developing Environmental Legislation to Promote Recycling of Industrial By-Products—An Endless Story,” Waste Management, Vol. 28, No. 3, 2008, pp. 489-501.
- A. Malek, “Caractéristique Physico-Chimique de Haut Fourneau,” Séminaire de Génie Civil, Annaba, 2000, pp. 19-23.
- H. Rizzi, “Valorisation et Commercialisation des Sous Produits du Complexe Sidérurgique d’El Hadjar,” Sémi naire de Génie Civil, Annaba, 1998, pp. 26-29.
- A. Boudjelli, “Utilisation du Laitier en Technique Rou tière,” Séminaire de Génie Civil, Annaba, 1998, pp. 56-60.
- LCPC, “Conception et Dimensionnement des Structures des Chaussées,” Guide Technique, LCPC—SETRA, France, 1994, 266 p.