Sustainable Fly Ash Based Roof Tiles with Waste Polythene Fibre: An Experimental Study
- 1 Department of Civil Engineering, Fahad Bin Sultan University, Tabuk, Kingdom of Saudi Arabia
- 2 Polytechnic Civil Engineering Section, Aligarh Muslim University, Aligarh, India
- 3 Department of Civil Engineering, Fahad Bin Sultan University, Tabuk, Kingdom of Saudi Arabia
- 4 Department of Civil Engineering, Fahad Bin Sultan University, Tabuk, Kingdom of Saudi Arabia
Abstract
The compressive stress-strain behavior and other characteristics of treated fly ash based roof tiles have been studied by several experimental tests. This paper attempts to presents the results and observations of a study and comparison based on the past reported experimental data. Based on the results and observations of the comprehensive experimental study, five “control points” have been identified. The new sets of experiment have been carried out to investigate whether it might be possible the use of fly ash in fly ash based roof tiles for residential construction. In the present study, treated fly ash (TFA) of C category was used with different materials as a replacement of clay for making treated fly ash stone dust roof tiles (TFASDRT). Treated fly ash stone dust roof tiles (TFASDRT) were studied at varying percentages of cement, coarse sand, and radish stone dust (RSD) along with the constant percentage of waste polythene fibre (WPF). A research program was undertaken to evaluate the suitability of such test for assessing the properties of treated fly ash stone dust roof tiles (TFASDRT). The result of this study recommends that the fly ash based roof tiles provides a sustainable supplement to the traditional clay roof tiles, they increase the efficiency of traditional roof tiles and significantly help to reduce the environmental issues associated with the disposal of these waste materials.
- ASTM (2005) American Standards for Testing and Materials. Standard C618-05 “Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete”.
- ASTM (2006) American Standards for Testing and Materials. Standard C593-06 “Standard Specification for Fly Ash and Other Pozzolans for Use with Lime for Soil Stabilization”.
- Xu, L.L., Guo, W., Wang, T. and Yang, N.R. (2005) Study on Fired Bricks with Replacing Clay by Fly Ash in High Volume Ratio. Construction and Building Materials, 19, 243-247. http://dx.doi.org/10.1016/j.conbuildmat.2004.05.017
- Demir, I., et al. (2005) Utilization of Kraft Pulp Production Residues in Clay Brick Production. Building and Environment, 40, 1533-1537. http://dx.doi.org/10.1016/j.buildenv.2004.11.021
- Browne, R.D. and Bamforth, P.B. (1977) Tests to Establish Concrete 15585 Pumpability. ACI Structural Journal, 74, 193-203.
- I.S: 3812 (1983) Specification for Fly Ash as Pozollana and Admixture (First Revision).
- I.S: 8112 1989) 43 Grade Ordinary Portland Cement Specifications (First Revision).
- I.S. 2720-7 Methods of Test for Soil Part 7 Determination of Water content-Dry Density Relation Using Light Compaction (Second Revision). 1983.
- ASTM (2001) Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile. Masonry Test Methods and Specifications for the Building Industry, ASTM-C67-00, 4th Edition, Philadelphia.
- Indian Standards (IS.1992a) Indian Standard Methods of Test of Burn Clay Building Bricks—Part 1: Determination of Compressive Strength, IS 3495, 3rd Rev., Bureau of Indian Standards, New Delhi.
- Ranjan, G. and Rao, A.S.R. (2000) Basic and Applied Soil Mechanics. 2nd Edition, New Age International (P) Limited, Publishers, Darya Ganj.
- Akhtar, M.N., et al. (2014) Use of the Falling-Head Method to Assess Permeability of Fly Ash Based Roof Tiles with Waste Polythene Fibre. International Journal of Scientific & Engineering Research, 5, 476-483.
- Akhtar, J.N., et al. (2010) An Experimental Study on Fibre-Reinforced Fly Ash Based Lime Bricks. International Journal of physical Sciences, 5, 1688-1695.
- Alam, J., et al. (2013) Flay Ash Based Brick Tiles: An Experimental Study. International Journal of Emerging Trends in Engineering and Development, 6, 2249-6149.