Experimental Investigation on Sensitivity of Smart Aggregate Embedded in Reinforced Concrete Beam
- 1 Applied Mechanics Department, Government College of Engineering Amravati, Maharashtra, India
- 2 Applied Mechanics Department, Government College of Engineering Amravati, Maharashtra, India
Abstract
Electromechanical impedance (EMI) based lead zirconate titanate (PZT) is an effective sensor to ensure the safety of structure. In civil engineering community, Reinforced Concrete (RC) structure is one of the most familiar engineering structures. Hence, it is very important to monitor the health of structure. In this paper, a new approach of structural health monitoring using embedded PZT in host structure is proposed. There are several issues while embedding PZT inside RC structure which are examined during study. This paper presents two experimental studies on lab sized concrete beams. First implementation was carried out with different methods of embedment of PZT and its sensitivity study when the host structure was subjected to damage. The second implementation was verified in terms of conductance sensitivity of embedded Smart Aggregate (SMAG) in varying orientation i.e. horizontal (0?) and vertical (90?) after embedding in RC beam. The electrical conductance and susceptance signatures of different embedded PZT transducers were measured and damage index was calculated by using Root Mean Square Deviation Method.
- Shanker, R. (2009) An Integrated Approach for Structural Health Monitoring. Indian Institute of Technology, Delhi.
- Annamdas, V., Yang, Y. and Soh, C. (2010) Impedance Based Concrete Monitoring Using Embedded PZT Sensors. International Journal of Civil and Structural Engineering, 1, 414-424.
- Wang, D.S., Li, Z., Zhang, S.S. and Zhu, H.P. (2013) Experimental Study on Sensitivity of Embedded PZT Impedance Transducers to Crack Damage of Reinforced Concrete Beam. The 13th International Symposium on Structural Engineering.
- Khante, S.N. and Gedam, S.R. (2016) PZT Based Smart Aggregate for Unified Health Monitoring of RC Structures. Open Journal of Civil Engineering, 6, 42-49.
- Dumoulin, C., Karaiskos, G. and Deraemaeker, A. (2015) Monitoring of Crack Propagation in Reinforced Concrete Beams Using Embedded Piezoelectric Transducers. In: Ohtsu, M., Ed., Acoustic Emission and Related Non-Destructive Evaluation Techniques in the Fracture Mechanics of Concrete, Woodhead Publishing, Cambridge, 161-175. http://dx.doi.org/10.1016/B978-1-78242-327-0.00008-8
- Kaur, N., Gupta, N., Jain, N. and Bhalla, S. (2013) Integrated Global Vibration and Low-Cost EMI Technique for Structural Health Monitoring of RC Structures Using Embedded PZT Patches. Proceedings of UKIERI Congress on Innovations in Concrete Construction, B. R. Ambdekar National Institute of Technology, Jalandhar, 5-8 March 2013, Paper No. UCC-488.
- Song, G.B., Gu, H.C. and Mo, Y.-L. (2008) Smart Aggregates: Multi-Functional Sensors for Concrete Structures—A Tutorial and a Review. Smart Materials and Structures, 17, Article ID: 033001. http://dx.doi.org/10.1088/0964-1726/17/3/033001
- Negi, P., Kaur, N., Bhalla, S. and Chakraborty, T. (2014) Experimental Strain Sensitivity Investigations on Embedded PZT Patches in Varying Orientations. Proceedings of 9th Biennial Conference on Structural Engineering Convention (SEC 2014), New Delhi, 22-24 December 2014, 2615-2620.
- Visalakshi, T. and Bhalla, S. (2014) Reinforcement Corrosion Assessment Capability of Surface Bonded and Embedded Piezo Sensors for RC Structures. Journal of Intelligent Material Systems and Structures, 26, 2304-2313.
- Xu, B., Li, Z. and Dyke, S.J. (2015) Interface Debonding Detection for an Irregular Complex Multi-Chamber Steel Reinforced Concrete Column with PZT Measurements. 11th International Workshop on Advanced Smart Materials and Smart Structures, Technology University of Illinois, Urbana-Champaign, 1-2 August 2015..