The present paper focuses on compressive strength of Ultra High Performance Fiber Reinforced Concrete (UHPFRC) cube and cylinder under compression testing machine, the experimental determination of test results shows +5% variation in compressive strength, differs from normal concrete +20% the ascending in strength development at an increased age under an elevated temperature of the material is identified with addition of hooked end steel fiber. In this study, the optimized mix design developed and the conversion ratios determined to develop relationship between cube and cylinder. The comparison between mean compressive strength ratio for cube and cylinder has been presented to determine high compressive strength. The research work is carried out to achieve enhanced target compressive strength 180 N/mm 2 .
Yudenfreund, M., Odler, I. and Brunauer, S. (1972) Hardened Portland Cement Pastes of Low Porosity I. Materials and Experimental Methods. Cement and Concrete Research, 2, 313-330. https://doi.org/10.1016/0008-8846(72)90073-7
Ezeldin, A.S. and Balaguru, P.N. (1992) High-Strength Fiber-Reinforced Concrete under Compression. Journal of Material Engineering, 4, 415-429. https://doi.org/10.1061/(asce)0899-1561(1992)4:4(415)
Birchali, J.D., Howard, A.J. and Kendall, K. (1981) Flexural Strength and Porosity of Cements. Nature, 289, 388-390.
Fanella, D.A. and Naaman, A.E. (1985) Stress Strain Properties of Fiber Reinforced Mortar in Compression. ACI Journal, 82, 475-483.
Bache, H. (1981) Densified Cements Ultra-Fine Particle-Based Materials. Proceedings of the 2nd International Conference on Super Plasticizers in Concrete, Ottawa, Canada, 33 p.
Roy, D.M. (1992) Advanced Cement System Including CBC, DSP, MDF. 9th International Congress on the Chemistry of the Cement, New Delhi, India, 357-380.
Collepardi, S., Coppola, L., Troli, R. and Collepardi, M. (1998) Mechanical Properties of Modified Reactive Powder Concrete. A Report Vo. 95, May-June 1998, 284-292.
Ma, J.X., Dietz, J. and Dehn, F. (2002) Ultra High Performance Self Compacting Concrete. Lacer, 7, 33-42.
Resplendino, J. (2004) First Recommendations for Ultra High-Performance Concretes and examples of application. Proceedings of the International Symposium on Ultra High Performance Concrete, Kassel, Germany, 13-15 September 2004, 79-91.
Habel, K., Denarie, E. and Bruhwiler, E. (2006) Structural Response of Elements Combining Ultra high Performance Fiber Reinforced Concretes. Journal of Structural Engineering, 132, 1793-1800. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:11(1793)
Benjamin, A. (2006) Grabeal Material Property Characterization of Ultra-High Performance Concrete. Publication No. FHWA-HRT-2006 06-10.
Shihada, M. and Arafa, S. (2006) Effects of Silica Fume, Ultrafine and Mixing Sequences on Properties of Ultra High Performance Concrete. Asian Journal of Materials Science, 23, 137-146.
Yang, I.H., Joh, C. and Kim, B.S. (2011) Flexural Strength of Ultra High Strength Concrete Beams Reinforced with Steel Fibers. Procedia Engineering, 14, 793-796. https://doi.org/10.1016/j.proeng.2011.07.100
Barris, C., Torres, L., Mias, C. and Vilanova, I. (2012) Design of FRP Reinforced Concrete Beams for Serviceability Requirements. Journal of Civil Engineering and Management, 18, 843-857. https://doi.org/10.3846/13923730.2012.720934
Ghafari, E., Costa, H. and Júlio, E. (2015) Statistical Mixture Design Approach for Eco-Efficient UHPC. Cement and Concrete Composites, 55, 17-25.
Rong, Z., Sun,W., Xiao, H. and Jiang, G. (2015) Affects of Nano-SiO2 Particles on the Mechanical and Micro Structural Properties of Ultra High Performance Cementitious Composites. Cement and Concrete Composites, 56, 25-31.
Kusumawardaningsih, Y., Fehling, E. and Ismail, M. (2015) UHPC Compressive Strength Test Specimens: Cylinder or Cube? Procedia Engineering, 125, 1076-1080.
Kumavat, H.R. and Patel, V.J. (2014) Factors Influencing the Strength Relationship of Concrete Cube and Standard Cylinder. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 3, 76-79.
Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014) Mix Design and Properties of Ultra-high Performance Fiber Reinforced Concrete (UHPFRC). Cement and Concrete Research, 56, 29-39. https://doi.org/10.1016/j.cemconres.2013.11.002
Kazemi, S. and Lubell, A. (2012) Influence of Specimen’s Size and Fiber Content on Mechanical Properties of Ultra High Performance Fiber Reinforced Concrete. ACI Materials Journal, 109, 675-684.
Al-Hassani, H.M., Khalil, W.I. and Danha, L.S. (2014) Mechanical Properties of Reactive Powder Concrete with Various Steel Fiber and Silica Fume Contents. Acta Tehnica Corviniensis-Bulletin of Engineering, Tome VII 1.
Sudarshan, N.M. and Chandrasekhar Rao, T. (2015) Mechanical Properties Assessment of Ultra High Performance Fiber Reinforced Concrete (UHPFRC). International Journal for Research in Applied Science & Engineering Technology, 3, 839-844.
Rossi, P. and Parant, E. (2005) Durability of an Ultra-High Fibre Reinforced Cement Composite Under a Service State Loading and in an Aggressive Environment. Cement and Concrete Research, 377, 1106-1114.
Magureanu, C., Sosa, I., Negrutiu, C. and Heghes, B. (2010) Physical and Mechanical Properties of Ultra-High Strength Fiber Reinforced Cementitious Composites. In: Oh, B.H., et al., Eds., Fracture Mechanics of Concrete and Concrete Structures, High Performance, Fiber Reinforced Concrete, Special Loadings and Structural Applications, Korea Concrete Institute, 1487-1491.
Habel, K., et al. (2008) Ultra-High Performance Fiber Reinforced Concrete in Central Canada. Canadian Journal of Civil Engineering, 35, 217-224. https://doi.org/10.1139/L07-114
Ghafari, E., Costa, H. and Julio, E. (2015) Statistical Mixture Design Approach for Eco-Efficient UHPC. Cement and Concrete Composite, 55, 17-25.
Eldin, H.K.S., Mohamed, H.A., Khater, M. and Ahmed, S. (2014) Mechanical Properties of Ultra-High Performance Fiber Reinforced Concrete. International Journal of Engineering and Innovative Technology, 4, 4-10.
Prem, P.R., Bharatkumar, B.H. and Iyer, N.R. (2012) Mechanical Properties of Ultra High Performance Concrete. World Academy of Science, Engineering and Technology IJCSAE, 6.
Bashandy, A.A. (2013) Influence of Elevated Temperatures on the Behavior of Economical Reactive Powder Concrete. Journal of Civil Engineering Research, 3, 89-97.
Richard, P. and Cheyrezy, M. (1995) Composition of Reactive Powder Concretes. Cement and Concrete Research, 25, 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2
de Larrard, F. and Sedran, T. (2002) Mixture-Proportioning of High-Performance Concrete. Cement and Concrete Research, 32, 1699-1704. https://doi.org/10.1016/S0008-8846(02)00861-X
Fuller, W. and Thomson, S. (1907) The Laws of Proportioning Concrete. Transactions of the American Society of Civil Engineers, LIX, 67-143.
Funk, J. and Dinger, D. (1994) Predictive Process Control of Crowded Particulate Suspensions. Kluwer Publishers, London.
Sudarshan, N.M. and Chandrashekar Rao, T. (2017) Vibration Impact on Fresh Concrete of Conventional and UHPFRC. International Journal of Applied Engineering Research, 12, 1683-1690.
AMPA (Amtliche Material prufanstaltfurda) (2010) Bauwesen Druckfestigkeitfactor. Kassel Unversitaet, Kassel.
Leutbecher, T. (2014) Material Properties of UHPC. Chapter 4, Kassel University.
Mansur, M. and Islam, M. (2002) Interpretation of Concrete for Nonstandard Specimens. Journal of Materials in Civil Engineering, 14, 151-155. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:2(151)
Graybeal, B. and Davis, M. (2008) Cylinder or Cube: Strength Testing of 80 to 200 MPa (116 to29 ksi) Ultra-High Performance Fiber Reinforced Concrete. ACI Material Journal, 105, 603-609.