Flow Assurance in Subsea Pipeline Design for Transportation of Petroleum Products
- 1 Faculty of Geology & Petroleum Engineering, Hochiminh City University of Technology-Vietnam National University, Hochiminh, Vietnam
- 2 Faculty of Geology & Petroleum Engineering, Hochiminh City University of Technology-Vietnam National University, Hochiminh, Vietnam
- 3 Faculty of Geology & Petroleum Engineering, Hochiminh City University of Technology-Vietnam National University, Hochiminh, Vietnam
Abstract
Transportation of petroleum products through pipeline presents considerable risks including wax formation and deposition as a result of heat loss of fluids, which is harmful to the flow due to the reduced inner diameter or totally blocked pipelines in extreme cases. The production interruption due to blocked pipelines can cause colossal financial loss. Therefore, in order to diminish those adverse effects, it is critical that pipeline design for flow assurance should be considered. Flow assurance is a relatively new field in oil and gas industry, it means that the flow of hydrocarbon stream from one point to another must be ensured successfully and economically. Although flow assurance is extremely diverse, encompassing many discrete and specialized subjects and bridging across the full gamut of engineering disciplines, our work concentrated principally on the study of wax deposit in the pipelines. The main purpose of this paper is to focus on the aspect of material in pipeline design and the selection of thermal insulation coatings. Furthermore, operating parameters such as pressure, temperature and flowrate will be examined to achieve optimum results. For the case study in this paper, the pipeline connecting Ca NguVang Oilfield’s Wellhead Platform (WHP) to the Central Processing Platform of Bach Ho Oilfield (CPP-3) in Vietnam will be studied. Hence, this work covers several aspects, namely the theoretical study, the modeling using Excel as well as using specialized software OLGA, and finally the application for a real case in the petroleum industry in Vietnam.
- Phung Dinh Thuc (2016) Connection between Ca Ngu Vang Oilfield and Bach Ho Oilfield. Vietnam Petroleum Journal.
- Rosvold, K. (2008) Wax Deposition Models. Master Thesis, Norwegian University.
- Reistle, C.E. (1932) Paraffin and Gongealing-Oil Problems. Department of Commerce, Bureau of Mines and University of Wyoming.
- Lee, H.S. and Fogler, H.S. (2001) Combined Convective Heat and Mass Transfer Analysis of Wax Deposition under Turbulent Flow Conditions. Department of Chemical Engineering, University of Michigan and Chevron Energy Technology Company, Housten.
- Zhu, T., Walker, J.A. and Liang, J. (2008) Evaluation of Wax Deposition and Its Control during Production of Alaska North Slope Oils—Final Report. United States Department of Energy and National Energy Technology Laboratory.
- Singh, P. (2000) Gel Deposition on Cold Surfaces. PhD Thesis, University of Michigan.
- Gluyas, J.G. and Underhill, J.R. (2003) The Staffa Field, Block 3/8b, UK North Sea. Memoirs, 20, 327-333. https://doi.org/10.1144/GSL.MEM.2003.020.01.28
- Qabazard, H.M. (2013) An Introduction to the Oil Industry & OPEC. OPEC Secretariat Public Relations & Information Department, Austria.
- Rønningsen, H.P., Bjørndal, B., Hansen, A.B. and Pedersen, W.B (1991) Wax Precipitation from North Sea Crude Oils Crystallization and Dissolution Temperatures, and Newtonian and Non-Newtonian Flow Properties. Energy & Fuels, 5, 895-908. https://doi.org/10.1021/ef00030a019
- Huang, Z. (2011) Application of the Fundamentals of Heat and Mass Transfer to the Investigation of Wax Deposition in Subsea Pipelines. PhD Thesis, University of Michigan.
- BauckIrmann-Jacobsen, T. (2015) Flow Assurance—A System Perspective. University of Oslo.
- William Guan, S. (2005) Advance Onshore and Offshore Pipeline Coating Technologies. China International Oil & Gas Pipeline Technology (Integrity) Conference & Expo.