In the process of quantifying optimum seismic design parameters, the losses implying the failure of the system must be assessed. Intangibles such as human lives may lie among indirect losses. In this paper, we propose a model to calculate the value of the investment that society should be willing to make for saving lives. In order to do this, we analyze both individual and social problems. However, special treatment is given to the individual problem where the value of the life of a human being is inferred by what the person should be willing to pay or willing to accept to reduce the risk of dying. Due to the use of utility curves in the calculation of this kind of intangible, we pay special attention to shape and requirement conditions of these curves. We also pay attention when personal impact and legacies or bequests are considered in utility curves. The results are shown through some applications, especially in the computation of optimum seismic design coefficients at a low seismicity site.
KeywordsIndirect LossesHuman Life ValueWillingness CriteriaUtilitySeismic Design
Rosenblueth, E. (1964) Closure to Probabilistic Design to Resist Earthquakes. Journal of the Engineering Mechanics Division, 90, Paper 4090.
Esteva, L. (1968) Bases para la formulación de diseño sísmico. Ph.D. Thesis, Faculty of Engineering, UNAM, Mexico City.
García-Pérez, J. (2012) The Value of Risk Reduction in Optimum Seismic Design. 15th World Conference of Earthquake Engineering, Lisbon, 24-28 September, Vol. 11, 8668-8676.
Rosenblueth, E. (1987) What Should We Do with Structural Reliabilities, Reliability and Risk Analysis in Civil Engineering. 5th International Conference on Applications of Statistics and Probability in Soil and Structural Engineering, Waterloo, Ontario, 24-34.
Rosenblueth, E. (1992) The Social Value of Human Life in Earthquake Engineering. International Symposium on Earthquake Disaster Prevention, México, July, 185-197.
Howard, R.A. (1979) Life and Death Decision Analysis Research. Report No. EES DA-79-2, Department of Engineering-Economic Systems, Stanford University, Stanford.
Von Neumann, J. and Morgenstern, O. (1943) Theory of Games and Economic Behavior. 2nd Edition, Princeton University Press, Princeton.
Keeney, R.L. and Raiffa, H. (1976) Decisions with Multiple Objectives: Preferences and Value Trade-Offs, John Wiley & Sons, New York.
Shepard, D. and Zeckhauser, R. (1984) Survival versus Consumption. Management Science, 30, 423-439. https://doi.org/10.1287/mnsc.30.4.423
Viscusi, W.K. and Aldy, J.E. (2003) The Value of a Statistical Life: A Critical Review of Market Estimates Throughout the World. The Journal of Risk and Uncertainty, 27, 5-76. https://doi.org/10.3386/w9487
Pandey, M.D. and Nathwani, J.S. (2004) Life Quality Index for the Estimation of Societal Willingness-to-Pay for Safety. Structural Safety, 26, 181-199. https://doi.org/10.1016/j.strusafe.2003.05.001
Starr, C. (1969) Societal Benefit versus Technological Risk, Science, 165, 1232-1248. https://doi.org/10.1126/science.165.3899.1232
Starr, C. and Whipple, C. (1980) Risk of Risk Decisions, Science, 208, 1114-1119. https://doi.org/10.1126/science.208.4448.1114
American Society of Civil Engineers (ASCE) (2000) Prestandard and Commentary for the Seismic Rehabilitation of Buildings. Report No. FEMA-356, Washington DC.
Porter, K.A. (2003) An Overview of PEER’s Performance-Based Earthquake Engineering Methodology. ICASP9, San Francisco, 6-9 July 2003, 1-8.
Hamburger, R.O. (2004) Development of Next-Generation Performance-Based Seismic Design Guidelines, Performance-Based Seismic Design Concepts and Implementation. Proceedings of the International Workshop, Bled, 28 June-1 July 2004, PEER Report 2004/05, 89-100.
Ang, A. and De Leon, D. (1997) Determination of Optimal Target Reliabilities for Design and Upgrading of Structures. Structural Safety, 19, 91-103. https://doi.org/10.1016/S0167-4730(96)00029-X
Esteva, L., Díaz-López, O. and Ismael, E. (2010) Seismic Vulnerability Functions of Multi-Storey Buildings and Applications. Structure and Infrastructure Engineering, 6, 3-16. https://doi.org/10.1080/15732470802663755
Pozos-Estrada, A., Liu, T.J., Gómez, R. and Hong, H.P. (2016) Seismic Design and Importance Factor: Benefit/Cost for Overall Service Time versus per Unit Service Time. Structural Safety, 58, 40-51. https://doi.org/10.1016/j.strusafe.2015.08.005
Goda, K. and Hong, H.P. (2006) Optimal Seismic Design Considering Risk Attitude, Societal Tolerable Risk Level, and Life Quality Criterion. Journal of Structural Engineering, 132, 2007-2035. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(2027)
Tversky, A. and Kahneman, D. (1992) Advances in Prospect Theory: Cumulative Representation of Uncertainty. Risk Uncertainty, 5, 297-323. https://doi.org/10.1007/BF00122574
Goda, K. and Hong, H.P. (2008) Implied Preference for Seismic Design Level and Earthquake and Earthquake Insurance. Risk Analysis, 28, 523-537. https://doi.org/10.1111/j.1539-6924.2008.01037.x
Whitman, R.V., Biggs, J.M., Brennan III, J., Cornell, C.A., de Neufville, R.Y. and Vanmarcke, E. (1973) Summary of Methodology and Pilot Application, Seismic Decision Analysis. Report No. 9, Department of Civil Engineering, MIT, Cambridge, MA.
Grandori, G. (1977) Seismic Zoning as a Problem of Optimization. 2nd International Conference on Structural Safety and Reliability, Munich, September 1977, 613-624.
Ferrito, J.M. (1984) Economics of Seismic Design for New Buildings. Journal of Structural Engineering, 110, 2925-2937. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:12(2925)
Vargas, E. and Jara, J.M. (1989) Influencia del coeficiente sísmico de diseño en el costo de edificios con marcos de concreto, Memorias del VIII congreso nacional de ingeniería sísmica y VII congreso nacional de ingeniería estructural. Acapulco, Gro., nov.
Rosenblueth, E. (1976) Optimum Design for Infrequent Disturbances. Journal of the Structural Division, 102, 1807-1825.
Rackwitz, R. (2000) Optimization: The Basis of Code-Making and Reliability Verification. Structural Safety, 22, 27-60. https://doi.org/10.1016/S0167-4730(99)00037-5
Rosenblueth, E. (1976b) Towards Optimum Design through Building Codes. Journal of the Structural Division, 102, 591-607.
Ordaz, M., Salgado-Gálvez, A., Pérez-Rocha, L.E., Cardona, O. and Mena-Hernández, U. (2017) Optimum Earthquake Design Coefficients Based on Probabilistic Seismic Hazard Analyses, Theory and Applications. Earthquake Spectra, 33, 1455-1474. https://doi.org/10.1193/110116EQS189M
García-Pérez, J., Castellanos, F. and Díaz, O. (2005) Occupancy Importance Factor in Earthquake Engineering. Engineering Structures, 27, 1625-1632. https://doi.org/10.1016/j.engstruct.2005.05.017
García-Pérez, J. (2016) Expected Present Value of Losses in the Computation of Optimum Seismic Design Parameters. Engineering and Technology International Journal of Geological and Environmental Engineering, 10, 626-631.
Ordaz, M., Jara, J.M. and Singh, S.K. (1989) Riesgo sísmico y espectros de diseño en el Estado de Guerrero, Joint report of the II-UNAM and the Seismic Investigation Center AC of the Javier Barrios Sierra Foundation. UNAM, Mexico City.