Test Apparatus for Performance Evaluation of Compressed Air End-Use Applications
- 1 A.T.E. Enterprises Private Limited, 2 Shreenivas Classic, Pune, India
- 2 Birla Accucast Limited, MIDC Waluj Industrial Area, Aurangabad, India
- 3 Birla Accucast Limited, MIDC Waluj Industrial Area, Aurangabad, India
Abstract
Compressed air is an integral utility part of industrial utility systems. Any improvement in compressed air system will lead to reduction in utility cost. The effectiveness of utilization side of compressed air is usually dependent upon operator’s discretion. There are no performance testing methods available for testing existing end use equipments. A test apparatus for estimation of compressed air flow based on measurement of pressure reduction in a fixed volume cylinder in a given time is developed. The test apparatus is easy to build and simple to operate in an industrial environment. This can be used for measuring performance of any pneumatic end-use equipment and for benchmarking the performance. The test apparatus was used in a foundry for quantifying the performance of the old and new blow guns.
- Y. Ming, “Air Compressor Efficiency in a Vietnamese Enterprise,” Energy Policy, Vol. 37, No. 6, 2009, pp. 2327-2337. doi:10.1016/j.enpol.2009.02.019
- Bureau of Energy Efficiency, “Energy Efficiency in Electrical Utilities,” Ministry of Power, New Delhi, 2003.
- Energy Efficiency and Renewable Energy, “Improving Compressed Air System Performance: A Sourcebook for Industry,” United States Department of Energy, Washington DC, 2003.
- R. N. James and J. J. K. Peter, “Compressed Air System Best Practice Programmer: What Needs to Change to Secure Long-Term Energy Savings for New Zealand,” Energy Policy, Vol. 37, No. 9, 2009, pp. 3400-3408. doi:10.1016/j.enpol.2009.04.047
- M. D’Antonio, G. Epstein, S. Moray and C. Schmidt, “Compressed Air Load Reduction Approaches and Innovations”, Proceedings of the Twenty-Seventh Industrial Energy Technology Conference, New Orleans, 2005.
- M. A. Koski, “Compressed Air Energy Audit ‘the Real Story’,” Energy Engineering, Vol. 99, No. 3, 2002, pp. 59-70. doi:10.1092/XKBG-8L3M-L90Y-7F5N
- S. K. Hajra Choudhary and A. K. Hajra Choudhary, “Workshop Technology: Volume I,” Media Promoters and Publishers, Mumbai, 1989.
- GIPL, “Ex-Blow Gun Air Product Catalogs for Compressed Products,” 2011. http://www.giplindia.com/exblow.htm.