Designing an Automatic Control System for the Improved Functioning of a Solar Wall with Phase Change Material (PCM)
- 1 IUT Bethune, Université d’ Artois, Arras, France
- 2 LGCgE Laboratory, Université d’ Artois, Arras, France
- 3 LGCgE Laboratory, Université d’ Artois, Arras, France
- 4 Department of Engineering, Altoona College, Pennsylvania State University, Altoona, PA, USA
Abstract
Solar walls constitute an important green architectural feature that positively contributes to energy saving in buildings. Different configurations may be proposed, such as, solar wall with Phase Change Material (PCM), composite solar wall, photovoltaic solar wall, zigzag solar wall, and solar hybrid wall. Being environmentally friendly, these passive solar components can provide thermal comfort and help save energy. Their disadvantages include principally unpredictable heat transfer, heat losses by night for some systems or inverse thermo-siphon phenomenon. Appropriate energy management techniques can be used to control and optimize the performances of solar walls. An experimental study for energy management of a PCM based solar wall is described in this paper. The experimental results show the effectiveness of the proposed automatic control system in regulating the capture of solar energy.
- Hami, K., Draoui, B. and Hami, O. (2012) The Thermal Performances of a Solar Wall. Energy, 39 11-16. http://dx.doi.org/10.1016/j.energy.2011.10.017
- Zrikem, Z. and Bilgen, E. (1987) Theoretical Study of a Composite Trombe-Michel Wall Solar Collector System. Solar Energy, 39, 409-419. http://dx.doi.org/10.1016/S0038-092X(87)80059-2
- Hassanain, A.A., Hokam, E.M. and Mallick, T.K. (2010) Effect of Storage Solar Wall on the Passive Solar Heating Constructions. Energy and Buildings, 43 737-747. http://dx.doi.org/10.1016/j.enbuild.2010.11.020
- Chan, H.Y., Riffat, S.B. and Zhu, J. (2010) Review of Passive Solar Heating and Cooling Technologies. Renewable and Sustainable Energy Reviews, 14, 781-789. http://dx.doi.org/10.1016/j.rser.2009.10.030
- Zhang, Y., Chen, Q., Zhang, Y. and Wang, X. (2013) Exploring Buildings’ Secrets: The Ideal Thermophysical Properties of a Building’s Wall for Energy Conservation. International Journal of Heat and Mass Transfer, 65, 265-273. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2013.06.008
- Wang, W., Tian, Z. and Ding, Y. (2013) Investigation on the Influencing Factors of Energy Consumption and Thermal Comfort for a Passive Solar House with Water Thermal Storage Wall. Energy Build, 64, 218-223. http://dx.doi.org/10.1016/j.enbuild.2013.05.007
- Bojic, M., Johannes, K. and Kuznik, F. (2014) Optimizing Energy and Environmental Performance of Passive Trombe Wall. Energy Build, 70, 279-286. http://dx.doi.org/10.1016/j.enbuild.2013.11.062
- Onishe, J., Soeda, H. and Mizuno, M. (2001) Numerical Study on a Low Energy Architecture Based upon Distributed Heat Storage System. Renewable Energy, 22, 61-66. http://dx.doi.org/10.1016/S0960-1481(00)00049-5
- Saadatian, O., Lim, C.H., Sopian, K. and Salleh, E. (2013) A State of the Art Review of Solar Walls: Concepts and Applications. Journal of Building Physics, 37, 55-79.
- Shen, J., Lassue, S., Zalewski, L. and Huang, D. (2007) Numerical Study on Thermal Behavior of Classical or Composite Trombe Solar Walls. Energy and Buildings, 39, 962-974. http://dx.doi.org/10.1016/j.enbuild.2006.11.003
- Zalewski, L., Chantant, M., Lassue, S. and Duthoit, B. (1997) Experimental Thermal Study of a Solar Wall of Composite Type. Energy and Buildings, 25, 7-18. http://dx.doi.org/10.1016/S0378-7788(96)00974-7
- Cabeza, L.F., Castellon, C., Nogues, M., et al. (2007) Use of Microencapsulated PCM in Concrete Walls for Energy Savings. Energy and Buildings, 39, 113-119. http://dx.doi.org/10.1016/j.enbuild.2006.03.030