Conscious Use of the Virtual Sphere Modeling in the Simulation of Passive Night Cooling of Buildings
- 1 Politecnico di Torino, Energy Department, Turin, Italy
Abstract
Night cooling of building is considered as a technology with a high potential of impact on air conditioning energy needs. Natural ventilation should be the first option for night cooling, for obvious reasons of energy savings. The evaluation of the capacity of the building to cool down its structures during night ventilation is of primary concern during preliminary design stage, even though night cooling with natural ventilation is among the most complex problem to be modelled in details. Some modelling options are available, assuming different simplifications in space and time. Among them, virtual sphere modelling has been proposed in the past as a quick way to perform dynamic simulation of the night cooling of buildings. In this paper, the theoretical origin of the virtual sphere model is recalled, underlining its limits in case of application to buoyancy driven night cooling of buildings. The limits can explain the disagreements of virtual sphere prediction with other methods reported in literature and may stimulate a more conscious application of the model and further improvements of the method.
- Kolokotroni, M. and Aronis, A. (1999) Cooling-Energy Reduction in Air-Conditioned Offices by Using Night Ventilation. Applied Energy, 63, 241-253.
- Givoni, B. (1998) Effectiveness of Mass and Night Ventilation in Lowering the Indoor Daytime Temperatures. Part I: 1993 Experimental Periods. Energy and Buildings, 28, 25-32.
- Santamouris, M., Mihalakakou, G., Argiriou, A. and Asimakopoulos, D. (1996) On the Efficiency of Night Ventilation Techniques for Thermostatically-Controlled Buildings. Solar Energy, 56, 479-484.
- Geros, V., Santamouris, M., Tsangrassoulis, A. and Guarracino, G. (1999) Experimental Evaluation of Night Ventilation Phenomena. Journal of Energy and Buildings, 29, 141-154. http://dx.doi.org/10.1016/S0378-7788(98)00056-5
- Li, Y. and Yam, J.C.V. (2004) Designing Thermal Mass in Naturally Ventilated Buildings. International Journal of Ventilation, 2-4, 313-324.
- Li, Y. and Xu, P. (2006) Thermal Mass Design in Buildings—Heavy or Light? International Journal of Ventilation, 5-1, 143-149.
- Shaviv, E., Yezioro, A. and Capeluto, G. (2001) Thermal Mass and Night Ventilation as Passive Cooling Design Strategy. Renewable Energy, 24, 445-452.
- Yang, L. and Li, Y. (2008) Cooling Load Reduction by Using Thermal Mass and Night Ventilation. Energy and Buildings, 40, 2052-2058. http://dx.doi.org/10.1016/j.enbuild.2008.05.014
- Zhou, J., Zhang, G., Lin, Y. and Li, Y. (2008) Coupling of Thermal Mass and Natural Ventilation in Buildings. Energy and Buildings, 40, 979-986. http://dx.doi.org/10.1016/j.enbuild.2007.08.001
- Artmann, N., Manz, H. and Heiselberg, P. (2008) Parameter Study on Performance of Building Cooling by Night-Time Ventilation. Renewable Energy, 33, 2589-2598. http://dx.doi.org/10.1016/j.renene.2008.02.025
- Pfafferott, J., Herkel, S. and Jaschke, M. (2003) Design of Passive Cooling by Night Ventilation: Evaluation of a Parametric Model and Building Simulation with Measurements. Energy and Buildings, 35, 1129-1143. http://dx.doi.org/10.1016/j.enbuild.2003.09.005
- Zhai, Z. and Chen, Q. (2004) Numerical Determination and Treatment of Convective Heat Transfer Coefficient in the Coupled Building Energy and CFD Simulation. Building and Environment, 39, 1001-1009. http://dx.doi.org/10.1016/j.buildenv.2004.01.023
- Goethals, K., Breesch, H. and Janssens, A. (2011) Sensitivity Analysis of Predicted Night Cooling Performance to Internal Convective Heat Transfer Modeling. Energy and Buildings, 43, 2429-2441. http://dx.doi.org/10.1016/j.enbuild.2011.05.033