The pivotal aim of this study is to evaluate the rock mass characterization and deformation modulus. It is vital for rock mass classification to investigate important parameters of discontinuities. Therefore, Rock Mass Rating (RMR) and Tunneling quality index (Q) classification systems are applied to analyze 22 segments along proposed tunnel routes for hydropower in Kandiah valley, Khyber Pakhtunkhwa, Pakistan. RMR revealed the range of fair to good quality rocks, whereas Q yielded poor to fair quality rocks for investigated segments of the rock mass. Besides, E m values were acquired by empirical equations and computer-aided program RocLab, and both methods presented almost similar variation trend of their results. Hence, the correlations of E m with Q and RMR were carried out with higher values of the regression coefficient. This study has scientific significance to initially understand the rock mass conditions of Kandiah valley.
KeywordsRock Mass ClassificationRMR and QDeformation Modulus (<i>E<sub>m</sub></i>)Empirical EquationsRocLabTunnel
Ritter, W. (1879) Die Statik der Tunnelgewolbe. Springer, German.
Abu-Zeid, N. and Vuillermin, F. (1997) Geochemical Characterisation of the Outcropping Rock Masses of the Immediate Vicinity of Wadi El-Kaffrein Dam Site (Jordan). Bulletin of the International Association of Engineering Geology, 55, 3.
El-Naqa, A. (2001) Application of RMR Q Geomechanical Classification Systems along the Proposed Mujib Tunnel Route, Central Jordan. Bulletin of Engineering Geology and the Environment, 60, 257-269. https://doi.org/10.1007/s100640100112
Barton, N. (2002) Some New Q-Value Correlations to Assist in Site Characterization and Tunnel Design. International Journal of Rock Mechanics and Mining Sciences, 39, 185-216. https://doi.org/10.1016/S1365-1609(02)00011-4
Choi, S.Y. and Park, H.D. (2002) Comparison among Different Criteria of RMR and Q-System for Rock Mass Classification for Tunneling in Korea. Tunneling and Underground Space Technology, 17, 391-401. https://doi.org/10.1016/S0886-7798(02)00063-9
Ramamurthy, T. (2004) A Geo-Engineering Classification for Rocks and Rock Masses. International Journal of Rock Mechanics and Mining Sciences, 41, 89-101. https://doi.org/10.1016/S1365-1609(03)00078-9
Hoek, E. and Diederichs, M.S. (2006) Empirical Estimation of Rock Mass Modulus. International Journal of Rock Mechanics and Mining Sciences, 43, 203-215. https://doi.org/10.1016/j.ijrmms.2005.06.005
Naithani, A.K., Bhatt, A.K. and Murthy, K.S.K. (2009) Geological and Geotechnical Investigations of Loharinag-Pala Hydroelectric Project, Garhwal Himalaya, Uttarakhand. Journal of the Geological Society of India, 73, 821-836. https://doi.org/10.1007/s12594-009-0066-0
Ozsan, A., Hakan, B., Serdar, Y. and Ozkan, C. (2009) Engineering Geological Evaluation and Preliminary Support Design for the Metro Extension Tunnel, Ankara, Turkey. Bulletin of Engineering Geology and the Environment, 68, 397-408. https://doi.org/10.1007/s10064-009-0192-3
Gupta, M.C., Singh, B.K. and Singh, K.N. (2011) Engineering Geological Rock Mass Classification of Punasa Tunnel Site, Khandwa District, Madhya Pradesh. Journal of the Geological Society of India, 77, 269-272. https://doi.org/10.1007/s12594-011-0034-3
Gurocak, Z. (2011) Analyses of Stability and Support Design for a Diversion Tunnel at the Kapikaya Dam Site, Turkey. Bulletin of Engineering Geology and the Environment, 70, 41-52. https://doi.org/10.1007/s10064-009-0258-2
Mondal, M.E.A., Siddique, T., Alam, M. and Alam, M.M. (2016) Rock Mass Rating and Kinematic Analysis for Slope Stability Investigation of Utari Dam, Lalitpur District, Uttar Pradesh. Journal Geological Society of India, 87, 463-468. https://doi.org/10.1007/s12594-016-0414-9
Isik, N.S., Ulusay, R. and Doyuran, V. (2008) Deformation Modulus of Heavily Jointed-Sheared and Blocky Greywackes by Pressuremeter Tests: Numerical, Experimental and Empirical Assessments. Engineering Geology, 101, 269-282. https://doi.org/10.1016/j.enggeo.2008.06.004
Ajalloeian, R. and Mohammadi, M. (2014) Estimation of Limestone Rock Mass Deformation Modulus Using Empirical Equations. Bulletin of Engineering Geology and the Environment, 73, 541-550. https://doi.org/10.1007/s10064-013-0530-3
Bieniawski, Z.T. (1978) Determining Rock Mass Deformability: Experience from Case Histories. International Journal of Rock Mechanics and Mining Sciences, 15, 237-247. https://doi.org/10.1016/0148-9062(78)90956-7
Barton, N., Loset, F., Lien, R. and Lunde, J. (1980) Application of the Q-System in Design Decisions Concerning Dimensions and Appropriate Support for Underground Installations. International Conference on Sub-Surface Space, Rock Store, Stockholm, Sweden, 23-27 June 1980, 553-561.
Serafim, J.L. and Pereira, J.P. (1983) Considerations on the Geomechanical Classification of Bieniawski. Proceedings of International Symposium on Engineering Geology and Underground Openings, Lisbon, Portugal, 1983, 1133-1144.
Nicholson, G.A. and Bieniawski, Z.T. (1990) A Nonlinear Deformation Modulus Based on Rock Mass Classification. International Journal of Mining and Geological Engineering, 8, 181-202. https://doi.org/10.1007/BF01554041
Mitri, H.S., Edrissi, R. and Henning, J. (1994) Finite Element Modeling of Cable Bolted Stopes in Hard Rock Ground Mines. Proceedings of SME Annual Conference, Albuquerque, NM, USA, 14-17 February 1994, 94-116.
Read, S.A.L., Richards, L.R. and Perrin, N.D. (1999) Applicability of the Hoek-Brown Failure Criterion to New Zealand Greywacke Rocks. Proceedings of the 9th International Congress on Rock Mechanics, Paris, France, 25-28 August 1999, 655-660.
Palmstrom, A. and Singh, R. (2001) The Deformation Modulus of Rock Masses: Comparisons between in Situ Tests and Indirect Estimates. Tunnelling and Underground Space Technology, 16, 115-131. https://doi.org/10.1016/S0886-7798(01)00038-4
Gokceoglua, C., Sonmeza, H. and Kayabasi, A. (2003) Predicting the Deformation Moduli of Rock Masses. International Journal of Rock Mechanics and Mining Sciences, 40, 701-710. https://doi.org/10.1016/S1365-1609(03)00062-5
Kayabasi, A., Gokceoglu, C. and Ercanoglu, M. (2003) Estimating the Deformation Modulus of Rock Masses: A Comparative Study. International Journal of Rock Mechanics and Mining Sciences, 40, 55-63. https://doi.org/10.1016/S1365-1609(02)00112-0
Sonmez, H., Gokceoglu, C. and Ulusay, R. (2004) Indirect Determination of the Modulus of Deformation of Rock Masses Based on the GSI System. International Journal of Rock Mechanics and Mining Sciences, 1, 849-857. https://doi.org/10.1016/j.ijrmms.2003.01.006
Zhang, L. and Einstein, H.H. (2004) Using RQD to Estimate the Deformation Modulus of Rock Masses. International Journal of Rock Mechanics and Mining Sciences, 41, 337-341. https://doi.org/10.1016/S1365-1609(03)00100-X
Tahirkheli, R.A.K. and Jan, M.Q. (1979) A Preliminary Geological Map of Kohistan and Adjoining Areas. National Centre of Excellence in Geology, University of Peshawar, Pakistan.
International Society of Rock Mechanics (1978) Suggested Methods for the Quantitative Description of Discontinuities in Rock Masses. International Journal of Rock Mechanics and Mining Sciences, 15, 319-368.
Piteau, D.R. (1973) Characterizing and Extrapolating Rock Joint Properties in Engineering Practice. Rock Mechanics, 2, 5-31.
Bieniawski, Z.T. (1989) Engineering Rock Mass Classifications. Wiley, New York.
Bieniawski, Z.T. (1973) Engineering Classification of Jointed Rock Masses. South African Institution of Civil Engineers, 15, 335-344.
Bieniawski, Z.T. (1974) Geomechanics Classification of Rock Masses and Its Application in Tunneling. 3rd Congress of the International Society of Rock Mechanics, Denever National Academy of Sciences, Washington DC, 1-7 September 1974, 27-32.
Bieniawski, Z.T. (1976) Rock Mass Classification in Rock Engineering. In: Bieniawski, Z.T., Ed., Proceedings of the Symposium on Exploration for Rock Engineering, Balkema, Cape Town, 97-106.
Bieniawski, Z.T. (1979) Thegeomechanics Classification in Rock Engineering Applications. Proceedings of the 4th International Congress Rock Mechanics, Montreux, 2-8 September 1979, 41-48.
Barton, N., Lien, R. and Lunde, J. (1974) Engineering Classification of Rock Masses for the Design of Tunnel Support. Rock Mechanics, 6, 189-236. https://doi.org/10.1007/BF01239496
Stephens, R.E. and Banks, D.C. (1989) Moduli for Deformation Studies of the Foundation and Abutments of the Portugues Dam-Puerto Rico. In: Rock Mechanics as a Guide for Efficient Utilization of Natural Resources: Proceedings of the 30th US Symposium, Balkema, Rotterdam, 31-38.
Diederichs, M.S. and Kaiser, P.K. (1999) Stability of Large Excavations in Laminated Hard Rock Masses: The Voussoir Analogue Revisited. International Journal of Rock Mechanics and Mining Sciences, 36, 97-117. https://doi.org/10.1016/S0148-9062(98)00180-6
Carvalho, J. (2004) Estimation of Rock Mass Modulus.
Hoek, E., Carranza-Torres, C.T. and Corkum, B. (2002) Hoek-Brown Failure Criterion-2002 Edition. Proceedings of the Fifth North American Rock Mechanics Symposium, Toronto, 7-10 July 2002, 267-273.
Karaman, K., Ferdi, C. and Ayhan, K. (2015) A Comparative Assessment of Rock Mass Deformation Modulus. International Journal of Mining Science and Technology, 25, 735-740. https://doi.org/10.1016/j.ijmst.2015.07.006
Hamid, R.N., Abdolhadi, G., Seyed, A.M. and Vahab, S. (2014) On the Use of the RMR System for Estimation of Rock Mass Deformation Modulus. Bulletin of Engineering Geology and the Environment, 73, 531-540. https://doi.org/10.1007/s10064-013-0522-3
Grimstad, E. and Barton, N. (1993) Updating the Q-System for NMT, In: Proceedings of the International Symposium on Sprayed Concrete, Norwegian Concrete Association, Oslo, Norway, 20.
Palmstrom, A. (2000) Recent Developments in Rock Support Estimates by the RMi. International Journal of Rock Mechanics and Mining Sciences, 6, 1-19.
Panthee, S., Singh, P.K., Kainthola, A., et al. (2018) Comparative Study of the Deformation Modulus of Rock Mass. Bulletin of Engineering Geology and the Environment, 77, 751-760.