The oil and gas industry with its stringent safety policies, standards, rules and procedures still experience minor-to-major operational accidents/incidents in petroleum exploration and production processes. The root causes of incidents in upstream and downstream sectors are attributed to humans and organizational factors. The sector has been revolutionizing its safety system by way of risk identification and management and hazards hunt at a workplace to reduce the risk level of fatal and non-fatal injuries. In this research, the authors apply lean philosophy to surface the challenges of oil and gas safety system in an innovative way by identifying problems at root source and addressing it with employees’ engagement and involvement to continuously improve the safety system. The application of lean thinking has been proven in health care and manufacturing industries where this research makes parallel to take advantage of the experiences of the lean founders. Safety should not be a priority as priorities could change based on situations. Instead, safety should be an embedded business value that could be value streamed along the value chain, with value considered from the perspective of customer value that can also include the internal customer, employees. The purpose of this study is to find out why stringent oil and gas safety standards, procedures and rules have not spared the industry from occurrences of occupational accidents and incidents. Therefore, this study aims in addressing how offshore oil and gas exploration and production operational safety can be improved through lean thinking, where upstream work processes are streamlined to improve workplace visibility, eliminate wastes, improve structural sustainability as well as HSE risks and improve operational safety. The study focuses on human side of occupational safety improvement through direct employees’ involvement, workforce engagement and lean thinking application using lean philosophy, practice and tools. The study comprises five parts that are: Introduction, literature review, research methodology, result, discussion and conclusion.
KeywordsOperational Incidents and AccidentsIndustry Safety StandardsLean SafetyEmployees’ EngagementWaste in ProcessesEmployee Morale &
Mostafa, S. and Dumrak, J. (2020) A Waste Elimination Process: An Approach for Lean and Sustainable Manufacturing Systems. In: Management Association I, Ed., Sustainable Business: Concepts, Methodologies, Tools, and Applications, IGI Global, London, 567-598. https://doi.org/10.4018/978-1-5225-9615-8.ch026
Womack, J.P., Jones, D.T. and Roos, D. (1990) The Machine That Changed the World. Massachusetts Institute of Technology, Cambridge.
Chiarini, A., Baccarani, C. and Mascherpa, V. (2018) Lean Production, Toyota Production System and Kaizen Philosophy: A Conceptual Analysis from the Perspective of Zen Buddhism. The TQM Journal, 30, 425-438. https://doi.org/10.1108/TQM-12-2017-0178
Liker, J.K. (2004) The Toyota Way. McGraw Hill, New York.
Arunagiri, P. and Gnanavelbabu, A. (2016) Identification of Major Leanwaste and Its Contributing Factors Using the Fuzzy Analytical Hierarchy Process. Transactions—Canadian Society for Mechanical Engineering, 40, 371-382. https://doi.org/10.1139/tcsme-2016-0027
Ohno, T. and Bodek, N. (1988) Toyota Production System: Beyond Large-Scale Production. Productivity Press, New York.
Holweg, M. (2007) The Genealogy of Lean Production. Journal of Operations Management, 25, 420-437. https://doi.org/10.1016/j.jom.2006.04.001
Dalton, J. (2019) Gemba Walks. In: Great Big Agile, Apress, Berkeley, 173-174. https://doi.org/10.1007/978-1-4842-4206-3
Vidyasagar, A. (2016) Best of Back to Basics: The Art of Root Cause Analysis. Quality Progress, 49, 48.
Coetzee, R., van der Merwe, K. and van Dyk, L. (2016) Lean Implementation Strategies: How Are the Toyota Way Principles Addressed? South African Journal of Industrial Engineering, 27, 79-91. https://doi.org/10.7166/27-3-1641
Marin-Garcia, J.A., Juarez-Tarraga, A. and Santandreu-Mascarell, C. (2018) Kaizen Philosophy: The Keys of the Permanent Suggestion Systems Analyzed from the Workers’ Perspective. The TQM Journal, 30, 296-320. https://doi.org/10.1108/TQM-12-2017-0176
Sethi, R., Yanamadala, V., Burton, D.C. and Bess, R.S. (2017) Using Lean Process Improvement to Enhance Safety and Value in Orthopaedic Surgery: The Case of Spine Surgery. Journal of the American Academy of Orthopaedic Surgeons, 25, e244-e250. https://doi.org/10.5435/JAAOS-D-17-00030
Bonaccorsi, A., Carmignani, G. and Zammori, F. (2011) Service Value Stream Management (SVSM): Developing Lean Thinking in the Service Industry. Journal of Service Science and Management, 4, 428-439. https://doi.org/10.4236/jssm.2011.44048
Pride
Reason, J. (1990) Human Error. Cambridge University Press, Cambridge.
Zhang, J.Q., Chen, X.B. and Sun, Q.B. (2019) A Safety Performance Assessment Framework for the Petroleum Industry’s Sustainable Development Based on FAHP-FCE and Human Factors. Sustainability, 11, 1-20. https://doi.org/10.3390/su11133564
Howell, G., Ballard, G. and Demirkesen, S. (2017) Why Lean Projects Are Safer. Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC), Volume II, Greece, 9-12 July 2017, 895-901. https://doi.org/10.24928/2017/0116
Moaveni, S., Banihashemi, S.Y. and Mojtahedi, M. (2019) A Conceptual Model for a Safety-Based Theory of Lean Construction. Buildings, 9, Article No. 23. https://doi.org/10.3390/buildings9010023
Karakhan, A.A. (2016) Designer’s Liability: Why Applying PTD Principles Is Necessary. Professional Safety, 61, 53.
Gambatese, J.A., Pestana, C. and Woo Lee, H. (2016) Alignment between Lean Principles and Practices and Worker Safety Behavior. Journal of Construction Engineering and Management, 143, Article ID: 4016083. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001209
Camuffo, A., De Stefano, F. and Paolino, C. (2017) Safety Reloaded: Lean Operations and High Involvement Work Practices for Sustainable Workplaces. Journal of Business Ethics, 143, 245-259. https://doi.org/10.1007/s10551-015-2590-8
Jilcha, K. and Kitaw, D. (2016) Lean Influence on Occupational Safety and Health in Manufacturing Industries. Global Journal of Research in Engineering, 16, 1.
Srinivasan, S., Ikuma, L.H., Shakouri, M., Nahmens, I. and Harvey, C. (2016) 5S Impact on Safety Climate of Manufacturing Workers. Journal of Manufacturing Technology Management, 27, 364-378. https://doi.org/10.1108/JMTM-07-2015-0053
Blackmore, C.C., Bishop, R., Luker, S. and Williams, B.L. (2013) Applying Lean Methods to Improve Quality and Safety in Surgical Sterile Instrument Processing. The Joint Commission Journal on Quality and Patient Safety, 39, 99-105. https://doi.org/10.1016/S1553-7250(13)39014-X
Cordeiro, P., Sá, J.C., Pata, A., Goncalves, M., Santos, G. and Silva, F.J.G. (2020) The Impact of Lean Tools on Safety—Case Study. In: Arezes, P., et al., Eds., Occupational and Environmental Safety and Health II, Studies in Systems, Decision and Control, Vol. 277, Springer, Cham, 151-159.
Fillingham, D. (2007) Can Lean Save Lives? Leadership in Health Services, 20, 231-241. https://doi.org/10.1108/17511870710829346
Demirkesen, S. (2020) Measuring Impact of Lean Implementation on Construction Safety Performance: A Structural Equation Model. Production Planning & Control, 31, 412-433. https://doi.org/10.1080/09537287.2019.1675914
Bajjou, M.S., Chafi, A. and En-Nadi, A. (2017) The Potential Effectiveness of Lean Construction Tools in Promoting Safety on Construction Sites. International Journal of Engineering Research in Africa, 33, 179-193. https://doi.org/10.4028/www.scientific.net/JERA.33.179
Ahmad, W., Rezaei, J., Tavasszy, L.A. and de Brito, M.P. (2016) Commitment to and Preparedness for Sustainable Supply Chain Management in the Oil and Gas Industry. Journal of Environmental Management, 180, 202-213. https://doi.org/10.1016/j.jenvman.2016.04.056
European Commission (2019) Best Available Techniques Guidance Document on Upstream Hydrocarbon Exploration and Production. Final Guidance Document—Contract No. 070201/2015/706065/SER/ENV.F.1.
Hovda, S., Wolter, H., Kaasa, G.-O. and Olberg, T.S. (2008) Potential of Ultra-High-Speed Drill String Telemetry in Future Improvements of the Drilling Process Control. SPE-115196-MS IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Jakarta, 25-27 August 2008. https://doi.org/10.2118/115196-MS
Rehm, B., Schubert, J., Haghshenas, A., Paknejad, A.S. and Hughes, J. (2013) Managed Pressure Drilling. Elsevier, Amsterdam.
Cullen, W.D. (1990) The Public Inquiry into the Piper Alpha Disaster. HMSO, London.
Jernelov, A. (2010) The Threats from Oil Spills: Now, Then, and in the Future. Ambio, 39, 353-366. https://doi.org/10.1007/s13280-010-0085-5
Thiyagarajan, G. and Belayneh, M. (2018) Gap Analysis between Macondo Deep Water Horizon Drilling Blowout with Regulations and Industry Standards & Codes. International Journal of Engineering Research and Technology, 11, 91-104.
Deepwater Horizon Study Group (DHSG) Environmental Report (2011) The Macondo Blowout Environmental Report.
Pickrell, B.D. and Bea, R.G. (1997) Assessment of Human & Organizational Factors in Operations of Marine Terminals and Offshore Platforms. Department of Civil and Environmental Engineering University of California, Berkeley.
Bea, R.G. (1998) Human and Organization Factors: Engineering Operating Safety into Offshore Structures. Reliability Engineering and System Safety, 61, 109-126. https://doi.org/10.1016/S0951-8320(97)00058-6
Ratnayake, R.M.C. and Markeset, T. (2010) Maintaining Technical Integrity of Petroleum Flowlines on Offshore Installations: A Decision Support System for Inspection Planning. Proceedings of the ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering, Volume 6, Shanghai, 6-11 June 2010, 1-11. https://doi.org/10.1115/OMAE2010-20035
Lim, J.S., Kueh, J.Z. and Maskawi, B. (2019) Improvement of Operational Excellence: Reducing Unplanned Production Deferment. Society of Petroleum Engineers, London.
Laing, T., Upadhyay, A., Mohan, S. and Subramanian, N. (2019) Environmental Improvement Initiatives in the Coal Mining Industry: Maximisation of the Triple Bottom Line. Production Planning & Control, 30, 426-436. https://doi.org/10.1080/09537287.2018.1501813
Manuele, F.A. (2005) Risk Assessment & Hierarchies of Control: Their Growing Importance to the SH&E Profession. American Society of Safety Professionals—Safety Management, 50, 33-39.
Dodoo, J.E. and Al-Samarraie, H. (2019) Factors Leading to Unsafe Behavior in the Twenty First Century Workplace: A Review. Management Review Quarterly, 69, 391-414. https://doi.org/10.1007/s11301-019-00157-6
Longwell, H.J. (2002) The Future of the Oil and Gas Industry: Past Approaches, New Challenges. World Energy, 5, 100-104.
Dewardt, J.P. (1995) Lean Drilling—Introducing the Application of Automotive Lean Manufacturing Techniques to Well Construction. Journal of Petroleum Technology, 47, 113-114.
Abimbola, M., Khan, F. and Khakzad, N. (2016) Risk-Based Safety Analysis of Well Integrity Operations. Safety Science, 84, 149-160. https://doi.org/10.1016/j.ssci.2015.12.009
Vignes, B., Safety, P. and Aadnoy, B.S. (2008) Well-Integrity Issues Offshore Norway. IADC/SPE Drilling Conference, Orlando, 4-6 March 2008, 91-119. https://doi.org/10.2118/112535-MS
Torbergsen, H.-E.B., Norge, E., Haga, H.B., et al. (2012) An Introduction to Well Integrity.
Favilla, J.R., Claessens, D.A., Mello, U. and Flach, B. (2012) Achieving Excellence in E&P Offshore Logistics. SPE Intelligent Energy International, Utrecht, March 2012, SPE-150396-MS. https://doi.org/10.2118/150396-MS
Wilson, J.U. and Odesola, I.A. (2017) Design-Related Causes of Rework and the Performance of Oil and Gas Projects in Nigeria. International Journal of Sustainable Construction Engineering & Technology, 8, 60-76.
Goshime, Y., Kitaw, D. and Jilcha, K. (2019) Lean Manufacturing as a Vehicle for Improving Productivity and Customer Satisfaction: A Literature Review on Metals and Engineering Industries. International Journal of Lean Six Sigma, 10, 691-714. https://doi.org/10.1108/IJLSS-06-2017-0063
Kilpatrick, J. (2003) Lean Principles. Utah Manufacturing Extension Partnership. Orem, UT. (Google Scholar)
Farshad, A., Khosravi, Y. and Alizadeh, S. (2006) The Role of HSE Management System in Improving Health, Safety and Environment Performance in an Oil Organization.
Buell, R.S. (2006) Creating a Culture to Deliver Sustainable HSE Performance. Society of Petroleum Engineers, London. https://doi.org/10.2118/98564-MS
Bellarby, J. (2009) Well Completion Design. Developments in Petroleum Science, 56, 668-674.
Inderberg, O. and Neuenkirchen, J.-H. (2010) Presentation on Theme: Well Integrity Round Table Discussion Washington. Well Integrity Round Table Discussion Washington 2010. (slideplayer.com)
Deming, W.E. (1986) Out of the Crisis. MIT Centre for Advanced Engineering, Cambridge.
OGUK (2019) Health and Safety Report. The UK Oil and Gas Industry Association Limited (trading as OGUK) 2019, 1-52. https://oguk.org.uk/product/economic-report/