This paper presents a configurable model for occupational risk analysis, supported in decision matrix risk assessment with variable indexes dimensions and weightings. The formulation proposed seeks to overcome typical limitations such as range compression effect, mistakenly over classification of smaller risks and subjective input information. Also it allows its customization for each type of risk as a function of input information available in order to minimize subjectivity, while normalizing output for the calculated risk levels with a percent scale. This approach facilitates the implementation of models built to go along with the life of installations with periodically updates to fulfill accumulated data. To avoid discontinuation of procedures and practices implemented in the organizations, the model also enables the easy incorporation of risk assessment and control procedures based on risk classification matrixes, already in use regardless of their size and sector of activity.
Zimmerman, R. (1986) The Management of Risk. In: Covello, V.T., Menkes, J. and Munpower, J., Eds., Risk Evaluation and Management, Plenum, New York, 435-460. https://doi.org/10.1007/978-1-4613-2103-3_18
Madeira, C.P. (2007) Matriz de quantificação do risco químico profissional em laboratório. In: Soares, C.G., et al., Eds., Riscos Públicos e Industriais, Edições Salamandra, Lisboa, 935-950.
Graça, H., Batista, S. and Nunes, F.O. (2012) Risk Assessment in Analytical Laboratories. International Symposium on Occupational Safety and Hygiene, Occupational Safety and Hygiene—Proceedings SHO 2012, Guimarães, February, 288-293.
Nunes, F.O. (2003) Avaliação de Níveis de Segurança nos Locais de Trabalho: Uma Abordagem Quantitativa [Assessment of Safety Levels at Workplace: A Quantitative Approach]. Proceedings of the 3th International Colloquium on Occupational Safety and Hygiene, Portuguese Association of Engineers, Oporto, March, 77-82.
BS OHSAS 18001 (2007) Occupational Health and Safety Management Systems: Requirements. British Standard Institution.
Lawley, H.G. (1974) Operability Studies and Hazard Analysis. Chemical Engineering Progress, 70, 105-116.
US Army (1949) Procedure for Performing a Failure Mode Effect and Criticality Analysis. United States Military Procedure, MIL-P-1629.
Tixier, J., Dusserre, G., Salvi, O. and Gaston, D. (2002) Review of 62 Risk Analysis Methodologies of Industrial Plants. Journal of Loss Prevention in the Process Industries, 15, 291- 303. https://doi.org/10.1016/S0950-4230(02)00008-6
Oliveira, C.G. (2011) Proposal for an Integrated Approach to Professional Risk Assessment. PhD Thesis, Universidad de León, Leon.
Chapanis, A. (1991) To Communicate the Human Factors Message, You Have to Know What the Message Is and How to Communicate It. Human Factors Society Bulletin, 34, 1-4.
Karhu, O., Kansi, P. and Kuorinka, I. (1977) Correcting Working Postures in Industry: A Practical Method for Analysis. Applied Ergonomics, 8, 199-201. https://doi.org/10.1016/0003-6870(77)90164-8
McAtamney, L. and Corlett, N. (1993) RULA: A Survey Method for the Investigation of Work-Related Upper Limb Disorders. Applied Ergonomics, 24, 91-99. https://doi.org/10.1016/0003-6870(93)90080-S
Kilbom, A. (1994) Repetitive Work of the Upper Limb Extremity: Part I—Guidelines for the Practioner. International Journal of Industrial Ergonomics, 14, 51-57. https://doi.org/10.1016/0169-8141(94)90005-1
Moore, J.S. and Garg, A. (1995) The Strain Index: A Proposed Method to Analyze Jobs for Risk of Distal Upper Extremity Disorders. American Industrial Hygiene Association, 56, 443-458. https://doi.org/10.1080/15428119591016863
Latko, W.A., Armstrong, T.J., Foulke, J.A., Herrin, G.D., Ranbourn, R.A., and Ulin, S.S. (1997) Development and Evaluation of an Observational Method for Assessing Repetition in Hand Tasks. American Industrial Hygiene Association, 58, 278-285. https://doi.org/10.1080/15428119791012793
Hignett, S. and McAtamney, L. (2000) Rapid Entire Body Assessment (REBA). Applied Ergonomics, 31, 201-205. https://doi.org/10.1016/S0003-6870(99)00039-3
Occhipinti, E. and Colombini, D. (2005) The Occupational Repetitive Action (OCRA) Methods: OCRA Index and OCRA Checklist. Handbook of Human factors and Ergonomics Method, CRC Press, Boca Raton.
Kee, D. and Karwoswki, W. (2006) An Assessment Technique for Postural Loading on the Upper Body (LUBA). The Occupational Ergonomics Hand Book: Fundamental and Assessment for Occupational Ergonomics. CRC Press, Boca Raton, 832-839.
Battevi, N., Menoni, O., Ricci, G.M. and Cairoli, S. (2006) MAPO Index for Risk Assessment of Patient Manual Handling in Hospital Wards: A Validation Study. Ergonomics, 49, 671-687. https://doi.org/10.1080/00140130600581041
Cox, T., Griffiths, A. and Rial-Gonzalez, E. (2000) Work-Related Stress. Office for Official Publications of the European Communities, Luxembourg.
Fine, W.T. (1971) Mathematical Evaluations for Controlling Hazards. Journal of Safety Research, 3, 157-166.
Kinney, G.F. and Wiruth, A.D. (1976) Practical Risk Analysis for Safety Management. Technical Publication 5865, Naval Weapons Center, California.
GAO (1998) Combating Terrorism: Threat and Risk Assessments Can Help Prioritize and Target Program Investments. National Security and International Affairs Division, United States General Accounting Office.
ISO 17666 (2003) Space Systems Risk Management. International Standards Organization.
NASA (2009) Risk Management Reporting. GSFC-STD-0002, Goddard Space Flight Center, National Aeronautics and Space Administration.
USDD (2006) Risk Management Guide for DoD Acquisition. United States Department of Defense.
Belloví, M.B. and Malagón, F.P. (1993) Sistema simplificado de evaluación de riesgos de accidente. Nota Técnica de Prevención 330, Instituto Nacional de Seguridad y Higiene en el Trabajo, Barcelona.
BS 8800 (2004) Guide to Occupational Health and Safety Management Systems. Health and Safety Commission, British Standard Institution.
Pasman, H.J., Jung, S., Prem, K., Rogers, W.J. and Yang, X. (2009) Is Risk Analysis a Useful Tool for Improving Process Safety? Journal of Loss Prevention in the Process Industries, 22, 769-777. https://doi.org/10.1016/j.jlp.2009.08.001
Cox, L.A.J., Babayev, D. and Huber, W. (2005) Some Limitations of Qualitative Risk Rating Systems. Risk Analysis, 25, 651-662. https://doi.org/10.1111/j.1539-6924.2005.00615.x
Malchaire, J. and Koob, J.-P. (2006) Fiabilité de la méthode Kinney d’Analyse des Risques. Médicine du Travail et Ergonomie, 43, 3-8.
Kaplan, S. and Garrick, B.J. (1981) On the Quantitative Definition of Risk. Risk Analysis, 1, 11-27. https://doi.org/10.1111/j.1539-6924.1981.tb01350.x
Hollnagel, E. (1999) Accident Analysis and Barrier Functions. Project TRAIN, Institute for Energy Technology, Kjeller, Norway.
Sklet, S. (2006) Safety Barriers: Definition, Classification, and Performance. Journal of Loss Prevention in the Process Industries, 19, 494-506. https://doi.org/10.1016/j.jlp.2005.12.004
Harms-Ringdahl, L. (2009) Analysis of Safety Functions and Barriers in Accidents. Safety Science, 47, 353-363. https://doi.org/10.1016/j.ssci.2008.06.004
Chen, Q., Wu, W. and Zhang, X. (2012) The Differentiation and Decision Matrix Risk Assessment of Accident Precursors and Near-Misses on Construction Sites. International Journal of Engineering & Technology IJET-IJENS, 12, 38-53.
Cuny, X. and Lejeune, M. (1999) Occupational Risks and the Value and Modeling of a Measurement of Severity. Safety Science, 31, 213-229. https://doi.org/10.1016/S0925-7535(98)00067-8
Cuny, X. and Lejeune, M. (2003) Statistical Modeling and Risk Assessment. Safety Science, 41, 29-51. https://doi.org/10.1016/S0925-7535(01)00056-X
Gennarelli, A. and Wodzin, E. (2006) A Contemporary Injury Scale. Injury—International Journal of the Care of the Injured, 37, 1083-1091. https://doi.org/10.1016/j.injury.2006.07.009
Papazoglou, I.A. and Ale, B.M. (2007) A Logical Model for Quantification of Occupational Risk. Reliability Engineering and System Safety, 92, 785-803. https://doi.org/10.1016/j.ress.2006.04.017
Aneziris, O.N., Papazoglou, I.A., Baksteen, H., Mud, M., Ale, B.J., Bellamy, L.J., Hale, A.R., Bloemhoff, A., Post, J. and Oh, J.H. (2008) Quantified Risk Assessment for Fall from Height. Safety Science, 46, 198-220. https://doi.org/10.1016/j.ssci.2007.06.034
Ale, B.M., Baksteen, H., Bellamy, L.J., Bloemhof, A., Goossens, L., Hale, A., Mud, M.L., Oh, J.H., Papazoglou, I.A., Post, J. and Whiston, J.Y. (2008) Quantifying Occupational Risk: The Development of an Occupational Risk Model. Safety Science, 46, 176-185. https://doi.org/10.1016/j.ssci.2007.02.001
Snyder, R.G., Foust, D.R. and Bowman B.M. (1997) Study of Impact Tolerance through Free-Fall Investigations. Final Report, Highway Safety Research Institute, The University of Michigan, Ann Arbor.
Cory, C.Z. and Jones, M.D. (2006) Development of a Simulation System for Performing in Situ Surface Tests to Assess the Potential Severity of Head Impacts from Alleged Childhood Short Falls. Forensic Science International, 163, 102-114. https://doi.org/10.1016/j.forsciint.2005.11.014
Pinedo, I.F. (1982) Construcción de una escala de actitudes tipo Likert. Nota Técnica de Prevención 15, Instituto Nacional de Seguridad y Higiene en el Trabajo, Barcelona.
ILO (1998) Resolution Concerning Statistics of Occupational Injuries (Resulting from Occupational Accidents). 16th International Conference of Labor Statisticians, International Labour Organization, Report III, 18-22.
EU-OSHA (2011) Occupational Safety and Health Culture Assessment—A Review of Main Approaches and Selected Tools. European Agency for Safety and Health at Work.
Gillen, M., Schneider, S., Hecker, S. and Goldenhar, L. (2013) Safety Culture and Climate in Construction: Bridging the Gap Between Research and Practice. Report from a Joint Workshop between the Center for Construction Research and Training (CPWR) and the National Institute for Occupational Safety and Health (NIOSH).
Nunes, F.O. (2011) Information System for the Management of Occupational Health and Safety in the Organizations. PhD Thesis, Universidad de León, Leon.