Lowering Gasifier Tars and Particulates Using Heated Dololmite Catalyst and a Particulate Filter
- 1 Department of Biological and Agricultural Engineering, Louisiana State University, Baton Rouge, USA.
- 2 Department of Biological and Agricultural Engineering, Louisiana State University, Baton Rouge, USA.
- 3 Department of Biological and Agricultural Engineering, Louisiana State University, Baton Rouge, USA.
Abstract
For this study, a fixed-bed, down-draft gasifier was designed to investigate the effect of a dolomite catalytic bedon tar removal. Pine pellets and wood chips (cypress) were used to produce syngas from the down-draft gasifier. For the gas conditioning, a combination of a heated dolomite (bed temperature at 850?C for catalytic cracking of tars) and a particulate filter (for particulate removal) was used. Investigation of temperature effects on dolomite activity between 650?C and 950 C bed temperatures, showed optimum catalytic efficiency at approximately 850?C. At the optimum conditions, gravimetric tar and particulate concentrations in syngas produced from pine pellets were 0.85 g/Nm3 (±0.16) and 4.75 g/Nm3 (±0.07), respectively before gas conditioning, and 0.09 g/Nm3 (±0.02) and 2.01 g/Nm3 (±0.13), respectively after gas conditioning. Syngas from wood chips contained 1.63 g/Nm3 (±0.45) and 3.84 g/Nm3 (±1.16) of tars and particulates, respectively before gas cleaning and 0.19 g/Nm3 (±0.02) and 2.27 g/Nm3 (±0.27) tars and particulates, respectively after gas conditioning. The combustible portion of the gas constituted carbon monoxide (12% - 14%), hydrogen (11% - 12%), and methane (~2%). These results suggest that syngas produced from gasification of pine pellets and wood chips in a down-draft biomass gasifier can be effectively cleaned using a heated catalyst bed and a particulate filter. However, the benefits of gas conditioning will be offset by the need to maintain a heated catalyst bed for tar cracking.
- J. Gil, M. P. Aznar, M. A. Caballero, E. Frances and J. Corella, “Biomass Gasification in Fluidized Bed at Pilot Scale with Steam-Oxygen Mixtures. Product Distribution for Very Different Operating Conditions,” Energy & Fuels, Vol. 11, No. 6, 1997, pp. 1109-1118. doi:10.1021/ef9602335
- I. Narvaez, A. Orio, M. P. Aznar and J. Corella, “Biomass Gasification with Air in an Atmospheric Bubbling Fluidized Bed. Effect of Six Operational Variables on the Quality of the Produced Raw Gas,” Industrial & Engineering Chemistry Research, Vol. 35, No. 7, 1996, pp. 2110-2120. doi:10.1021/ie9507540
- A. J. M. Pemen, E. J. M. van Heesch, K. Yan, S. V. B. van Paasen, K. J. Ptasinski, Z. Matyas, P. A. Huijbrechts, B. O. E. Hultermans, A. Nicoletti, P. P. M. Blom and P. Zacharias, “Experimental Program of the Pulsed Corona Tar Cracker,” Conference Paper for Pulse Power Conference. Digest of Technical Papers. 12th IEEE International, Monterey, CA, Vol. 1, 1999, pp. 515-518.
- J. Herguido, J. Corella and J. Gonzalezsaiz, “Steam Gasification of Lignocellulosic Residues in a Fluidized-Bed at a Small Pilot Scale—Effect of the Type of Feedstock,” Industrial & Engineering Chemistry Research, Vol. 31, No. 5, 1992, pp. 1274-1282. doi:10.1021/ie00005a006
- T. A. Milne, N. Abatzoglou and R. J. Evans, “Biomass Gasifier Tars: Their Nature, Formation, and Conversion,” NREL Report, NREL/TP-570-25357, NREL, Golden, CO, 1998.
- D. Dayton, “A Review of the Literature on Catalytic Biomass Tar Destruction,” NREL Report, NREL/TP-51032815, NREL, Golden, CO, 2002.
- J. Delgado, M. P. Aznar and J. Corella, “Calcined Dolomite, Magnesite, and Calcite for Cleaning Hot Gas from a Fluidized Bed Biomass Gasifier with Steam: Life and Usefulness,” Industrial & Engineering Chemistry Research, Vol. 35, No. 10, 1996, pp. 3637-3643. doi:10.1021/ie950714w
- L. Devi, K. J. Ptasinski, F. Janssen, S. V. B. van Paasen, P. C. A. Bergman and J. H. A. Kiel, “Catalytic Decomposition of Biomass Tars: Use of Dolomite and Untreated Olivine,” Renewable Energy, Vol. 30, No. 4, 2005, pp. 565-587. doi:10.1016/j.renene.2004.07.014
- M. P. Aznar, J. Corella, J. Gil, J. A. Martin, M. A. Caballero, A. Olivares, P. Perez and E. Frances, “Biomass Gasification with Steam and Oxygen Mixtures at Pilot Scale and with Catalytic Gas Upgrading. Part I: Performance of the Gasifier,” In: A. V. Bridgwater and D. G. B. Boocock, Eds., Developments in Thermochemical Biomass Conversion, Kluwer Academic Publishers, London, 1997, pp. 1194-1208.