Temperature Control in a PV-WIND Medical Herb Dryer System
- 1 PV Cells Department, Electronics Research Institute, Cairo, Egypt.
- 2 PV Cells Department, Electronics Research Institute, Cairo, Egypt.
- 3 PV Cells Department, Electronics Research Institute, Cairo, Egypt.
Abstract
This paper introduces a temperature control technique for a medical herb dryer system. The technique fixes the drying temperature of the medical herbs at 40 ℃ even in cases of rapidly changing atmospheric conditions. The control of the dryer temperature is achieved through using on/off controller. The designed dryer contains two systems, which are the thermal and electrical systems. The thermal system is designed to heat the drying air by using solar water collector and electric heater. While, the electrical system which contain s a photovoltaic (PV)-WIND hybrid system is used to feed the different electrical loads of the dryer system. The control technique is investigated through simulation work by using MATLAB-SIMULINK. The simulation results indicate the high capability of the proposed technique in controlling the drying temperature, even in case of rapidly changing atmospheric conditions.
- G. Grang and H. P. Kumar, “Developments in Solar Drying,” Proceedings of the Second Asian-Oceania Drying Conference (ADC 2001), Pulau Pinang, 2001, pp. 297-319.
- A. Shafy, F. Famhy and M. Hassan, “Naval Temperature Control Technique for a Medical Herb system Powered by a Photovoltaic Array,” International Journal of Green Energy, Vol. 1, No. 2, 2005, pp. 147-156.
- J. R. Howell, R. B. Bannerot and G. C. Vliet, “Solar Thermal Energy Systems: Analysis and Design,” McGraw Hill, Inc., New York, 1982.
- T. Markvart, “Solar Electricity,” John Wiley & Sons, Inc., Hoboken, 1994.
- X. Jiang and J. Li, “Design of the Batch Predictive-PID Controller Based on the Nonlinear Electric Heating Model,” Lecture Notes in Electrical Engineering, Vol. 129, No. 6, 2012, pp. 293-298.
- B. Hahn and K. Oldham, “On-Off Iterative Adaptive Controller for Low-Power Micro-Robotic Step Regulation,” Asian Journal of Control, Vol. 14, No. 3, 2012, pp. 624-640. doi:10.1002/asjc.410
- X. Xu, M. M. Meyers, B. G. Sammakia and B. T. Murray, “Thermal Modeling and Life Prediction of Water-Cooled Hybrid Concentrating Photovoltaic/Thermal Collectors,” Journal of Solar Energy Engineering, Transactions of the ASME, Vol. 135, No. 1, 2013.
- Math Works, “Dynamic System Simulation for MatLab,” Software, Version 10, 2010.
- N. Elshahat and A. Zeit, “Aromatic Plants & Its Agricultural-Medical Products,” Arabic, Inc., Egypt, 2003.