Sizing of STATCOM to Enhance Voltage Stability of Power Systems for Normal and Contingency Cases
- 1 Electrical and Computer Engineering Department, Dhofar University, Salalah, Oman;Electrical Power and Machines Department, Cairo University, Giza, Egypt
- 2 Electrical Power and Machines Department, Cairo University, Giza, Egypt
- 3 Electricity Holding Company, Ministry of Electricity and Energy, Cairo, Egypt
Abstract
The electric power infrastructure that has served huge loads for so long is rapidly running up against many limitations. Out of many challenges it is to operate the power system in secure manner s o that the operation constraints are fulfilled under both normal and contingent conditions. Smart grid technology offers valuable techniques that can be deployed within the very near future or which are already deployed nowadays. Flexible AC Transmission Systems (FACTS) devices have been introduced to solve various power system problems. In literature, most of the methods proposed for sizing the FACTS devices only consider the normal operating conditions of power systems. Consequently, some transmission lines are heavily loaded in contingency case and the system voltage stability becomes a power transfer-limiting factor. This paper presents a technique for determining the proper rating/size of FACTS devices, namely the Static Synchronous Compensator (STATCOM), while considering contingency cases. The paper also verifies that the weakest bus determined by eigenvalue and eigenvectors method is the best location for STATCOM. The rating of STATCOM is specified according to the required reactive power needed to improve voltage stability under normal and contingency cases. Two case system studies are investigated: a simple 5-bus system and the IEEE 14-bus system. The obtained results verify that the rating of STATCOM can be determined according to the worst contingency case, and through proper control it can still be effective for normal and other contingency cases.
- N. G. Hingorani and L. Gyugi, “Understanding FACTS— Concepts and Technology of Flexible AC Transmission System,” Wiley-IEEE Press, New York, 2000.
- S. Gerbex, R. Cherkaoui and A. J. Germond, “Optimal Location of Multi-type FACTS Devices in a Power System by Means of Genetic Algorithms,” IEEE Transactions on Power Systems, Vol. 16, No. 3, 2001 pp. 537-544. http://dx.doi.org/10.1109/59.932292
- H. R. Baghaee, B. Vahidi, S. Jazebi, G. B. Gharehpetian and A. Kashefi, “Power System Security Improvement by Using Differential Evolution Algorithm Based FACTS Allocation,” Joint International Conference on Power System Technology and IEEE Power India Conference, 2008, pp. 1-6.
- K. Morison, L. Wang and P. Kundur, “Power System Security Assessment,” IEEE Power and Energy Magazine, Vol. 2, No. 5, 2004, pp. 30-39. http://dx.doi.org/10.1109/MPAE.2004.1338120
- M. Di Santo, A. Vaccaro, D. Villacci and E. Zimeo, “A Distributed Architecture for Online Power Systems Security Analysis,” IEEE Transactions on Industrial Electronics, Vol. 51, No. 6, 2004, pp. 1238-1248. http://dx.doi.org/10.1109/TIE.2004.837862
- IEE/PES Power System Stability Subcommittee Special Publication, “Voltage Stability Assessment: Concepts, Practices and Tools,” Product No. SP101PSS, Final Document, 2002.
- N. K. Sharma, A. Ghosh and R. K. Verma, “A Novel Placement Strategy for FACTS Controllers,” IEEE Transactions on Power Delivery, Vol. 18, No. 3, 2003, pp. 982-987. http://dx.doi.org/10.1109/TPWRD.2003.813874
- R. Mingus, F. Milano, R. Zarate-Minano and A. J. Conejo, “Optimal Network Placement of SVC Devices,” IEEE Transactions on Power Systems, Vol. 22, No. 4, 2007, pp. 1851-1860. http://dx.doi.org/10.1109/TPWRS.2007.907543
- O. A. Oke, D. W. P. Thomas and G. M. Asher, “A New Probabilistic Load Flow Method for Systems with Wind Penetration” 2011 IEEE Conference on PowerTech, Trondheim, 19-23 June 2011, pp. 1-6.
- M. A. PAI, “Computer Techniques in Power System Analysis,” 2nd Edition, McGraw Hill Publishing Company, New York, 2006.
- S. Kamel, M. Abdel-Akher and M. K. El-Nemr, “Hybrid Power and Current Mismatches Newton-Raphson LoadFlow Analysis for Solving Power Systems with Voltage Controlled Devices,” Proceeding of the 14th International Middle East Power System Conference (MEPCON’10), Cairo, 19-21 December 2012, Paper ID 280.
- N. Yorino, E. E. El-Araby, H. Sasaki and Sh. Harada, “A New Formulation for FACTS Allocation for Security Against Voltage Collapses,” IEEE Transactions on Power Systems, Vol. 18, No. 1, 2003, pp. 3-10. http://dx.doi.org/10.1109/TPWRS.2002.804921