Research ArticleOpen AccessGoogle Scholar indexed
Analysis of Electrical Characteristics of Photovoltaic Single Crystal Silicon Solar Cells at Outdoor Measurements
- 1
Smart Grid and Renewable Energy·Volume 02 (2011)·Pages 169–175·Published 19 May 2011·DOI10.4236/sgre.2011.22020
Copy link · social · email
Abstract
The electrical performance of a photovoltaic (PV) silicon solar cell is described by its current–voltage (I–V) character-istic curve, which is in turn determined by device and material properties. In this study, an investigation of the performance and device parameters of photovoltaic single crystalline silicon (Si.) solar cell of the construction n+pp++ PESC(Passivatted Emitter Solar Cell) at different conditions of solar irradiance, title angle and mirror boosting effects had been studied. Also the paper reports on the performance data of the Si. cell, using standard I–V characteristic curves to obtain output parameters and to show that there are possible performance degrading defects presents.
KeywordsSilicon Solar CellsI-V CharacteristicsPerformance AnalysesOutdoor ParametersMirror Boosting
- E. E. Van Dyk and E. L. Meyer, “Analysis of the Effect of Parasitic Resistances on the Performance of Photovoltaic Modules,” Renewable Energy, Vol. 29, No. 3, 2004, pp. 333-344. doi:10.1016/S0960-1481(03)00250-7
- E. L Meyer, “Assessing the Reliability and Degradation of Photovoltaic Module Performance Parameters,” IEEE Transactions on Reliability, Vol. 53, No. 1, 2004, pp. 83-92. doi:10.1109/TR.2004.824831
- A. Ibrahim, “Effect of Shadow and Dust on the Performance of Silicon Solar Cell,” Journal of Applied Sciences Research, ISSN 2090-424X, Vol. 1, No. 3, 2011, pp. 222-230.
- H. K. Elminir, A. E. Ghitas, F. El-Hussainy, R. Hamid, M. M. Beheary and K. M. Abdel-Moneim, “Optimum Solar Flat-plate Collector Slope: Case Study for Helwan, Egypt,” Energy Conversion & Management, Vol. 47, No. 5, 2006, pp. 624-637.
- A. Ibrahim, “LBIC Measurements Scan as a Diagnostic Tool for Silicon Solar Cell,” Journal of Applied Sciences Research, ISSN 2090-424X, Vol. 1, No. 3, 2011, pp. 215-221.
- E. Lorenzo, “Solar Electricity: Engineering of Photovoltaic Systems,” Chap. 3, Progensa, Earthscan Publications Ltd., Spain, 1994.
- S. R. Rummel and T. J. McMahon, “Effect of Cell Shunt Resistance on Module Performance at Reduced Light Levels,” Proceedings of the 13th NREL Photovoltaics, Program Review, Lakewood, May 1995, pp. 581-586.
- J. C. Joshi, “Thermal Evaluation of Different Types of Solar Cell Modules in Sunlight,” Renewable Energy, Vol. 5, No. 3, 1994, pp. 1761-1763.
- A. Q. Malik and S. J. B. H. Damit, “Outdoor Testing of Single Crystal Silicon Solar Cells,” Renewable Energy, Vol. 28, No. 9, 2003, pp. 1433-1445.
- A. A. M. Sayigh, “Generating Electricity from the Sun,” Renewable Energy Series, Pergamon press, Oxford, 1991.
- M. C. Gonzalez and J. J.Carrol, “Solar Cells Efficiency Variations with Varying Atmospheric Conditions,” Solar Energy, Vol. 53, No. 5, 1994, pp. 395-402. doi:10.1016/0038-092X(94)90054-X
- Catalogue Data Sheet of SOLAR-TEC Company for Solar Cells Fabrication, Czech Republic, 2002.
- J. A. Duffie and W. A. Beckman. “Solar Engineering of Thermal Processes,” 2nd Editon, John Wiley & Sons, Hoboken, 1991.
- E. Asl-Soleimani, S. Farhangi and S. Zabihim “The Effect of Tilt Angle, Air Pollution on Performance of Photovoltaic Systems in Tehran,” Renewable Energy, Vol. 24, No. 3-4, 2001, pp. 459-468.