3-D Modeling of Temperature Effect on a Polycrystalline Silicon Solar Cell under Intense Light Illumination

Abstract

The efficiency of a silicon solar cell is directly linked to the quantity of carrier photogenerated in its base. It increases with the increase of the quantity of carrier in the base of the solar cell. The carrier density in the base of the solar cell increases with the increase of the flux of photons that crosses the solar cell. One of the methods used to increase the flux of photon on the illuminated side of the solar cell is the intensification of the illumination light. However, the intensification of the light come with the increase of the energy released by thermalization, the collision between carriers, their braking due to the carriers concentration gradient electric field which lead to increase the temperature in the base of the solar cell. This work presents a 3-D study, of the effect of the temperature on the electronic parameters of a polycrystalline silicon solar under intense light illumination. The electronic parameters on which we analyze the temperature effect are: the mobility of solar cell carriers ( electrons and holes ), their diffusion coefficient, their diffusion length and their distribution in the bulk of the base . To study the effect of the temperature on electronic parameters, we take into account, the dependence of carriers ( electrons and holes ) mobility with the temperature ( μ n, (T) μ p (T)). Then, the resolution of the continuity equation , which is a function of the carriers gradient electric field and the carriers mobility , leads to the expressions of the diffusion coefficient, the diffusion length, and the density of carriers which are function of the temperature. Then, we studied the effects of the temperature on the diffusion parameters in order to explain their effect on the behavior the carriers distribution in intermediate, short circuit and open circuit operating modes at several positions in the base depth. It appears through this study that the diffusion coefficient and the diffusion length decrease with the increase of the temperature. We observe also that with the increase of the temperature, the density of carriers in the base of the solar cell in short circuit and open voltage operating modes increases. In intermediate operating mode, the density of carriers increases also with the temperature but it is function of the base depth.