Crossed Intralaminar Screws for Fusion of the Cervicothoracic Junction and the Thoracic Spine: The Experience in an Iberic Service with Case Series and Review of the Current Literature with Technique Description
- 1 Neurosurgeon, Centro Hospitalar Tondela-Viseu, Viseu, Portugal
- 2 Neurosurgeon, Centro Hospitalar Tondela-Viseu, Viseu, Portugal
Abstract
The treatment of pathologies in the thoracic spine is a challenge. The periodic failure of pedicle screw insertion and anatomical variations make the search for an alternative to pedicle screws in thoracic spine surgery necessary. The interlaminar crossed screws is a well-known and secure method for fusion in cervical spine, and in thoracic spine there used to be insufficient clinical data to support this technique, until now. We demonstrate in an initial series of 10 cases treated with interlaminar fusion in association of other fusion techniques in the thoracic spine with good results. Objective: Intralaminar screws have been shown to be a biomechanical salvage technique in the thoracic spine, especially in long cervicothoracic, thoracic and thoracolumbar fixation. The goals of this article are to demonstrate our initial experience and the range of indications for thoracic crossed intralaminar screws. Methods: In this article we describe our initial series performed at São Teotónio Hospital in Viseu, Portugal, and our results, and also provide a comprehensive review of the recent literature in the use of intralaminar crossed fixation.
- Wright, N.M. (2004) Posterior C2 Fixation Using Bilateral, Crossing C2 Laminar Screws: Case Series and Technical Note. Journal of Spinal Disorders, 17, 158-162. https://doi.org/10.1097/00024720-200404000-00014
- McGirt, M.J., Sutter, E.G., Xu, R., Sciubba, D.M., Wolinsky, J.P., Witham, T.F., Gokaslan, Z.L. and Bydon, A. (2009) Biomechanical Comparison of Translaminar Versus Pedicle Screws at T1 and T2 in Long Subaxial Cervical Constructs. Operative Neurosurgery, 65, 167-172. https://doi.org/10.1227/01.NEU.0000345642.50726.A3
- Kretzer, R.M., Hu, N., Kikkawa, J., Garonzik, I.M., Jallo, G.I., Tortolani, P.J., McAfee, P.C. and Cunningham, B.W. (2010) Surgical Management of Two-Versus Three-Column Injuries of the Cervicothoracic Junction: Biomechanical Comparison of Translaminar Screw and Pedicle Screw Fixation Using a Cadaveric Model. Spine, 35, E948-E954. https://doi.org/10.1097/BRS.0b013e3181c9f56c
- Hong, J.T., Sung, J.H., Son, B.C., Lee, S.W. and Park, C.K. (2008) Significance of Laminar Screw Fixation in the Subaxial Cervical Spine. Spine, 33, 1739-1743. https://doi.org/10.1097/BRS.0b013e31817d2aa2
- Hong, J.T., Yi, J.S., Kim, J.T., Ji, C., Ryu, K.S. and Park, C.K. (2009) Clinical and Radiologic Outcome of Laminar Screw at C2 and C7 for Posterior Instrumentation-Review of 25 Cases and Comparison of C2 and C7 Intralaminar Screw Fixation. World Neurosurgery, 73, 112-118. https://doi.org/10.1016/j.surneu.2009.06.010
- Baek, T.-H., Kim, I., Hong, J.-T., Kim, D.H., Shin, D. and Lee, S.-W. (2014) Feasibility of Bilateral Crossing C7 Intralaminar Screws: A Cadaveric Study. Journal of Korean Neurosurgical Society, 56, 5-10. https://doi.org/10.3340/jkns.2014.56.1.5
- Jang, W.Y., Kim, I.S., Lee, H.J., et al. (2011) A Computed Tomography-Based Anatomic Comparison of Three Different Types of c7 Posterior Fixation Techniques: Pedicle, Intralaminar, and Lateral Mass Screws. Journal of Korean Neurosurgical Society, 50, 166-172. https://doi.org/10.3340/jkns.2011.50.3.166
- Hong, J.T., Tomoyuki, T., Udayakumar, R., et al. (2011) Biomechanical Comparison of Three Different Types of C7 Fixation Techniques. Spine, 36, 393-398. https://doi.org/10.1097/BRS.0b013e3181d345e0
- Shin, S.I., Yeom, J.S., Kim, H.J., et al. (2012) The Feasibility of Laminar Screw Placement in the Subaxial Spine: Analysis Using 215 Three-Dimensional Computed Tomography Scans and Simulation Software. The Spine Journal, 12, 577-584. https://doi.org/10.1016/j.spinee.2012.07.010