Design and Modeling of Electromagnetic Impedance Surfaces to Reduce Coupling between Antennas
- 1 Center for Computational Nanosciences, Department of Physics and Astronomy, Ball State University, Muncie, USA
- 2 Department of Electrical Engineering, Advanced Teachers’ Training College for Technical Education, University of Douala, Douala, Cameroon
- 3 Department of Informational Statistics, Kyungsung University, Busan, Korea.
- 4 Center for Computational Nanosciences, Department of Physics and Astronomy, Ball State University, Muncie, USA
Abstract
We study the coupling problem of two waveguide antennas using the design of a two-dimensional inhomogeneous impedance structure with a fixed reflected field. Since this structure enables electromagnetic compatibility between antennas located on a plane, the behaviors of the electromagnetic field along the impedance structure are investigated. The method of moments is used to solve the integral equations and the numerical results are presented and analyzed. To reduce coupling between antennas, we need to take into account both the amplitude distribution of the field along the structure and in the openings of the antennas. In addition, while designing the structure, it is necessary to control the coefficient of decoupling.
- K. G. Klimachev, “Fundamentals of Forecasting and Provision of Electromagnetic Compatibility of Radio Engineering Systems and Devices,” Moscow Aviation Institute, Moscow, 1994.
- A. I. Sapgira, “Electromagnetic Compatibility of Radio Electronic Devises and Unpredicted Interferences, Vol 1: General Questions of EMC,” Soviet Radio, Moscow, 1977.
- N. C. Karmakar and M. N. Mollah, “Potential Applications of PBG Engineered Structures in Microwave Engineering: Part I,” Microwave Journal, Vol. 47, No. 7, 2004, pp. 22-44.
- P. S. Kildal, “Artificially Soft and Hard Surfaces in Electromagnetics,” IEEE Transactions on Antennas and Propagation, Vol. 38, No. 10, 1990, pp. 1537-1544. doi:10.1109/8.59765
- P. S. Kildal, A. A. Kishk and A. Tengs, “Reduction of Forward Scattering from Cylindrical Objects Using Hard Surfaces,” IEEE Transactions on Antennas and Propagation, Vol. 38, No. 10, 1990, pp. 1537-1544. doi:10.1109/8.59765
- R. E. Lawrie, “The Control of the Echo Area of Ogives by Cutoff Corrugated Surfaces,” IEEE Transactions on Antennas and Propagation, Vol. 14, No. 6, 1966, pp. 798-799. doi:10.1109/TAP.1966.1138802
- J. Carlsson and P. S. Kildal, “Transmission through Corrugated Slots,” IEEE Transactions on Electromagnetic Compatibility, Vol. 37, No. 1, 1995, pp. 114-121. doi:10.1109/15.350251
- R. B. Hwang and S. T. Peng, “Surface-Wave Suppression of Resonance-Type Periodic Structures,” IEEE Transactions on Antennas and Propagation, Vol. 51, No. 6, 2003, pp. 1221-1229. doi:10.1109/TAP.2003.811470
- G. Goussetis, A. P. Feresidis and P. Kosmas, “Efficient Analysis, Design, and Filter Applications of EBG Waveguide with Periodic Resonant Loads,” IEEE Transactions on Microwave Theory and Techniques, Vol. 54, No. 11, 2006, pp. 38853892. doi:10.1109/TMTT.2006.883648
- Y. S. Joe, J-F. D. Essiben, E. R. Hedin, J. T. N. Bisse and J. Mаtаngа, “Optimization of Impedance Plane Reducing Coupling between Antennas,” Wireless Engineering and Technology Journal, Vol. 2, No. 1, pp. 1-8, 2010. doi:10.4236/wet.2011.21001
- Yu. V. Yukhanov, “Analysis and Synthesis of Impedance Plane,” Radiotechnics and Electronics, Vol. 45, No. 4, 2000, pp. 404-409.
- A. Yu. Yukhanov, “Synthesis of Reactance Anisotropic Plane Excited By a Thread of In-Phase Magnetic Current,” International Conference on Radiation and Scattering of Electromagnetic Waves, Taganrog, 20-25 June 2005, pp. 360-362.