<i>A Brief Review</i>: Stage-Convertible Power Amplifier Using Differential Line Inductor
- 1 School of Electronic Engineering, Soongsil University, Seoul, Korea
- 2 School of Electronic Engineering, Soongsil University, Seoul, Korea
- 3 School of Electronic Engineering, Soongsil University, Seoul, Korea
Abstract
In this review article, a stage-convertible RF power amplifier designed with a 0.18- μ m RF CMOS process is described. A method to implement a low-power matching network is an essential technology for the stage-convertible power amplifier. Various low-power matching networks with distributed active transformers as an output power combiner are compared in terms of the amounts of undesired coupling, the chip size, and the amount of power loss. The feasibility of a differential line inductor for the stage-convertible power amplifier is assessed and explained. Finally, we show that the differential line inductor is a realistic means of reducing the overall chip size, enhancing the quality factor of the matching network, and minimizing the undesired coupling between the inter-stage matching network and any output matching network. Additionally, the operating mechanism of the stage-convertible power amplifier using the differential line inductor for a low-power matching network is described in detail.
- I. Aoki, S. D. Kee, D. B. Rutledge and A. Hajimiri, “Distributed Active Transformer—A New Power-Combining and Impedance-Transformation Technique,” IEEE Transactions on Microwave Theory and Techniques, Vol. 50, No. 1, 2002, pp. 316-331. doi:10.1109/22.981284
- I. Aoki, S. D. Kee, D. B. Rutledge and A. Hajimiri, “Fully Integrated CMOS Power Amplifier Design Using the Distributed Active-Transformer Architecture,” IEEE Journal of Solid-State Circuits, Vol. 37, No. 3, 2002, pp. 371-383. doi:10.1109/4.987090
- S. Kim, K. Lee, J. Lee, B. Kim, S. D. Kee, I. Aoki and D. B. Rutledge, “An Optimized Design of Distributed Active Transformer,” IEEE Transactions on Microwave Theory and Techniques, Vol. 53, No. 1, 2005, pp. 380-388. doi:10.1109/TMTT.2004.839940
- J. Staudinger, “Stage Bypassing in Multi-Stage PAs,” IEEE Transactions on Microwave Theory and Techniques, Symposium Workshop on Efficiency & Linearity Enhancement Methods for Portable RF/MW Power Amplifier, 2000.
- C. Park, Y. Kim, H. Kim and S. Hong, “A 1.9-GHz Triple-Mode Class-E Power Amplifier for a Polar Transmitter,” IEEE Microwave and Wireless Components Letters, Vol. 17, No. 2, 2007, pp. 148-150. doi:10.1109/LMWC.2006.890345
- C. Park, Y. Kim, H. Kim and S. Hong, “A 1.9-GHz CMOS Power Amplifier Using Three-Port Asymmetric Transmission Line Transformer for a Polar Transmitter,” IEEE Transactions on Microwave Theory and Techniques, Vol. 55, No. 2, 2007, pp. 230-238.
- C. Park, D. H. Lee, Y. Lee, J. Han, S.-H. Baek, Y. Kim and S. Hong, “1.8-GHz CMOS Power Amplifier with Stage-Convertible Structure Using Differential Line Inductor,” IEEE Radio Frequency Integrated Circuits Symp. Dig. Papers, 2007, pp. 737-740.
- C. Park, D. H. Lee, Y. Lee, J. Han, S.-H. Baek, Y. Kim, and S. Hong, “A 1.8-GHz CMOS Power Amplifier Using a Dual-Primary Transformer with Improved Efficiency in the Low Power Region,” Radio Frequency Integrated Circuits (RFIC) Symposium Vol. 56, No. 4, 2008, pp. 782-292. doi:10.1109/TMTT.2008.918152
- C. Park, “Experimental Investigation of Differential Line Inductor for RF Circuits with Differential Structure,” International Journal of Maritime Information and Communication Sciences, Vol. 9, No. 1, 2011, pp. 11-15.
- N. O. Sokal and A. D. Sokal, “Class-E: A New Class of High-Efficiency Tuned Single-Ended Switching Power Amplifiers,” IEEE Journal of Solid-State Circuits, Vol. 10, No. 3, 1975, pp. 168-176. doi:10.1109/JSSC.1975.1050582