Mixers of Ultra-High Gain from 5.0 to 18.0 GHz
- 1 Department of Electronics Engineering, Ming Hsin University of Science and Technology, Hsin-Chu City, Chinese Taipei
- 2 Department of Electrical Engineering, National Tsing-Hua University, Hsin-Chu City, Chinese Taipei
- 3 Department of Electronics Engineering, Ming Hsin University of Science and Technology, Hsin-Chu City, Chinese Taipei
- 4 Department of Electronics Engineering, Ming Hsin University of Science and Technology, Hsin-Chu City, Chinese Taipei
- 5 Department of Electronics Engineering, Ming Hsin University of Science and Technology, Hsin-Chu City, Chinese Taipei
- 6 Department of Electrical Engineering, National Tsing-Hua University, Hsin-Chu City, Chinese Taipei
Abstract
Mixers in the communication system provide the possibility of encoding and decoding radio-frequency EM waves with signals through the help of local oscillators. A mixer with capability of high conversion gain, good isolation, and good linearity is comparably appreciated. Extensively wide ranges of frequencies, from 5 .0 to 18 .0 GHz, are to be examined addressing the promising functions of mixers in this study. A TSMC 0.18 μm CMOS model implanted in Agilent ADS is used for the circuit designs. Generated from Gilbert Cell Mixer, the modified circuits take advantage of extra active and passive devices to optimize the conversion gains. Characteristics of high conversion gain over 20 dB or even higher (as high as 29.842 dB at -40 mW RF power at working frequency 6 GHz) and low noise figures (NF) are shown.
- M. T. Terrovitis and R. G. Meyer, “Noise in CurrentCommutating CMOS Mixers,” IEEE Journal of SolidState Circuits, Vol. 34, No. 6, 1999, pp. 772-783. doi:10.1109/4.766811
- K. Choi, D. H. Shin and C. P. Yue, “A 1.2-V, 5.8-mW, Ultra-Wideband Folded Mixer in 0.13-μm CMOS,” IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, Honolulu, 3-5 June 2007, pp. 489-492.
- H. Qi, J. Chen, H. Pan and J. Meng, “A 1.2 V High Linearity Mixer Design,” IEEE ICEMI, Xi’an, 16-18 August 2007, pp. 274-277.
- P. J. Sullivan, B. A. Xavier and W. H. Ku, “Low Voltage Performance of a Microwave CMOS Gilbert Cell Mixer,” Digital Object Identifier, Vol. 32, No. 7, 1997, pp. 11511155
- T.-P. Wang, C.-C. Chang, R.-C. Liu, M.-D. Tsai, K.-J. Sun, Y.-T. Chang, L.-H. Lu and H. Wang, “A Low-Power Oscillator Mixer in 0.18-m CMOS Technology,” Digital Object Identifier, Vol. 41, No. 1, 2006, pp. 88-95.
- E. E. Bautista, B. Bastani, J. Heck and Member IEEE, “A High IIP2 Down Conversion Mixer Using Dynamic Matching,” IEEE Journal of Solid-State Circuits, Vol. 35, No. 12, 2000, pp. 1934-1941. doi:10.1109/4.890307
- A. Q. Safarian, A. Yazdi and P. Heydari, “Design and Analysis of an Ultrawide-Band Distributed CMOS Mixer,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 13, No. 5, 2005, pp. 618-629.
- H.-C. Yang, M.-D. Chang, M.-C. Wang, S.-C. Chi and C.-T. Wang, “3.5 GHz to 10.0 GHz Mixers of High Gains and Good Isolations,” IEEE 7th International Conference on Wireless Communications, Neworking and Mobile Computing, (WiCOM), Wuhan, 23-25 September 2011.