Research ArticleOpen AccessGoogle Scholar indexed
Texture of Rotary-Friction-Welded from Dissimilar Medium Carbon Steels
Department of Mechanical Engineering, LMSM, University of Biskra, Biskra, Algeria
Orenburg State University, Orenburg, Russia
ZBO Drill Industries, Orenburg, Russia
Université Paris-Saclay, CNRS, Institut de chimie moléculaire et des matériaux d’Orsay, Orsay, France
Université Paris-Saclay, CNRS, Institut de chimie moléculaire et des matériaux d’Orsay, Orsay, France
Université Paris-Saclay, CNRS, Institut de chimie moléculaire et des matériaux d’Orsay, Orsay, France
- 1 Department of Mechanical Engineering, LMSM, University of Biskra, Biskra, Algeria
- 2 Orenburg State University, Orenburg, Russia
- 3 ZBO Drill Industries, Orenburg, Russia
- 4 Université Paris-Saclay, CNRS, Institut de chimie moléculaire et des matériaux d’Orsay, Orsay, France
- 5 Université Paris-Saclay, CNRS, Institut de chimie moléculaire et des matériaux d’Orsay, Orsay, France
- 6 Université Paris-Saclay, CNRS, Institut de chimie moléculaire et des matériaux d’Orsay, Orsay, France
World Journal of Condensed Matter Physics·Volume 10 (2020)·Pages 178–190·Published 11 November 2020·DOI10.4236/wjcmp.2020.104011
Copy link · social · email
Abstract
The purpose of the present study was to investigate the texture in dissimilar medium carbon steels welded by rotary friction technique. The Electron Backscatter Diffraction (EBSD) technique was the main technique used to investigate the effect of welding on grain size and grain crystallographic orientation in the welded joint. Moreover, the effect of isothermal heat treatment at 600 ° C on welded joint has been studied knowing that this annealing allows to decrease the residual stresses. EBSD results revealed different subzones in welded joint. The texture in the weld is essentially composed of three components: Goss {110} <001>, Rotated Cube {100} <110>, and Rotated Goss {110} <110> orientation. The heat treatments applied on welded material had a slight effect on texture and grain size.
KeywordsTextureRotary Friction WeldingMedium Carbon Steels
- Zhou, Y., Li, Z., Hu, L., Fuji, A. and North, T.H. (1995) Mechanical Properties of Particulate MMO/AISl304 Friction Joints. ISIJ International, 35, 1315-1321. https://doi.org/10.2355/isijinternational.35.1315
- ASM Handbook (1971) Welding, Brazing, and Soldering. 8th Edition, Vol. 6.
- Shete, N. and Deokar, S.U. (2017) A Review Paper on Rotary Friction Welding. International Conference on Ideas, Impact and Innovation in Mechanical Engineering, 5, 1557-1560. https://ijritcc.org/download/conferences/ICIIIME_2017/ICIIIME_2017_Track/1498548905_27-06-2017.pdf
- Li, W.Y., Vairis, A., Preuss, M. and Ma, T.J. (2016) Linear and Rotary Friction Welding Review. International Materials Reviews, 61, 71-100. https://doi.org/10.1080/09506608.2015.1109214
- Maalekian, M. (2007) Friction Welding-Critical Assessment of Literature. Science and Technology of Welding and Joining, 12, 738-759. https://doi.org/10.1179/174329307X249333
- Delijaicova, S., Silvaa, P.A.O., Resende, H.B. and Batalhab, M.H.F. (2018) Effect of Weld Parameters on Residual Stress, Hardness and Microstructure of Dissimilar AA2024-T3 and 3AA7475-T761 Friction Stir Welded Joints. Materials Research, 21, 1-11. https://doi.org/10.1590/1980-5373-mr-2018-0108
- Cai, W., Daehn, G., Vivek, A., Li, J., Khan, H., Mishra, R.S. and Komarasamy, M. (2019) A State of the Art Review on Solid-State Metal Joining. Journal of Manufacturing Science and Engineering, 141, Article ID: 031012. https://doi.org/10.1115/1.4041182
- Radosław, W. (2016) Effect of Friction Welding Parameters on the Tensile Strength and Microstructural Properties of Dissimilar AISI 1020-ASTM A536 Joints. The International Journal of Advanced Manufacturing Technology, 84, 941-955.
- Haribabu, S., Cheepu, M., Tammineni, L., Gurasala, N., Devuri, V. and Kantumuchu, V. (2019) Dissimilar Friction Welding of AISI 304 Austenitic Stainless Steel and AISI D3 Tool Steel: Mechanical Properties and Microstructural Characterization. In: Advances in Materials and Metallurgy, Springer, Singapore, 271-281. https://doi.org/10.1007/978-981-13-1780-4_27
- Zdemira, N.O., Sarsılmaz, F. and Hascalık, A. (2007) Effect of Rotational Speed on the Interface Properties of Friction Welded AISI 304L to 4340 Steel. Materials and Design, 28, 301-307. https://doi.org/10.1016/j.matdes.2005.06.011
- Gaikwad, V.T., Mishra, M.K., Hiwarkar, V.D. and Singh, R.K.P. (2020) Microstructure and Mechanical Properties of Friction Welded Carbon Steel (EN24) and Nickel Based Superalloy (IN718). International Journal of Minerals, Metallurgy and Materials.