The purpose of this paper is to demonstrate the applicability of Particle Swarm Optimization algorithm to determine material parameters in incompressible isotropic elastic strain-energy functions using combined tension and torsion loading. Simulation of rubber behavior was conducted from the governing equations of the deformation of a cylinder composed of isotropic hyperelastic incompressible materials. Four different forms of strain-energy function were considered based respectively on polynomial, exponential and logarithmic terms to reproduce load force (N) and torque (M) trends using natural rubber experimental data. After highlighting the minimization of the objective function generated in the fitting process, the study revealed that a particle swarm optimization algorithm could be successfully used to identify the best material parameters and characterize the behavior of rubber-like hyperelastic materials.
Martins, P.A.L.S., Natal Jorge, R.M. and Ferreira, A.J.M. (2006) A Comparative Study of Several Material Models for Prediction of Hyperelastic Properties: Application to Silicone-Rubber and Soft Tissues. Strain, 42, 135-147. https://doi.org/10.1111/j.1475-1305.2006.00257.x
Wu, Y., Wang, H. and Li, A. (2016) Parameter Identification Methods for Hyperelastic and Hyper-Viscoelastic Models. Applied Sciences, 6, 386. https://doi.org/10.3390/app6120386
Nunes, L.C.S. (2011) Mechanical Characterization of Hyperelastic Polydimethylsiloxane by Simple Shear Test. Materials Science and Engineering, 528, 1799-1804. https://doi.org/10.1016/j.msea.2010.11.025
Rachik, M., Schmidtt, F., Reuge, N., Le Maoult, Y. and Abbeé, F. (2001) Elastomer Biaxial Characterization Using Bubble Inflation Technique. II: Numerical Investigation of Some Constitutive Models. Polymer Engineering and Science, 41, 532-541. https://doi.org/10.1002/pen.10750
Beda, T. (2005) Optimizing the Ogden Strain Energy Expression of Rubber Materials. Journal of Engineering Materials and Technology, 127, 351-353. https://doi.org/10.1115/1.1925282
Beda, T. (2006) Combining Approach in Stages with Least Squares for Fits of Data in Hyperelasticity. Comptes Rendus Mecanique, 334, 628-633. https://doi.org/10.1016/j.crme.2006.06.004
Fernández, J.R., López-Campos, J.A., Segade, A. and Vilán, J.A. (2018) A Genetic Algorithm for the Characterization of Hyperelastic Materials. Applied Mathematics and Computation, 329, 239-250. https://doi.org/10.1016/j.amc.2018.02.008
Blaise, B.B., Betchewe, G. and Beda, T. (2019) Optimization of the Model of Ogden Energy by the Genetic Algorithm Method. Applied Rheology, 29, 21-29. https://doi.org/10.1515/arh-2019-0003
López-Campos, J.A., Segade, A., Casarejos, E., Fernández, J.R. and Días, G.R. (2019) Hyperelastic Characterization Oriented to Finite Element Applications Using Genetic Algorithms. Advances in Engineering Software, 133, 52-59. https://doi.org/10.1016/j.advengsoft.2019.04.001
Alam, M.N. (2016) Particle Swarm Optimization: Algorithm and Its Codes in MATLAB.
Ramzanpour, M., Hosseini-Farid, M., Ziejewski, M. and Karami, G. (2019) Particle Swarm Optimization Method for Hyperelastic Characterization of Soft Tissues. International Mechanical Engineering Congress and Exposition, Salt Lake City, 11-14 November 2019. https://doi.org/10.1115/IMECE2019-11829
Duan, Y., Harley, R.G. and Habetler, T.G. (2009) Comparison of Particle Swarm Optimization and Genetic Algorithm in the Design of Permanent Magnet Motors. IEEE 6th International Power Electronics and Motion Control Conference, Wuhan, 17-20 May 2009, 822-825. https://doi.org/10.1109/IPEMC.2009.5157497
Rivlin, R.S. and Saunders, D.W. (1951) Large Elastic Deformations of Isotropic Materials VII. Experiments on the Deformation of Rubber. Philosophical Transactions of the Royal Society A, 243, 251-288. https://doi.org/10.1098/rsta.1951.0004
Haupt, P. and Sedlan, K. (2001) Viscoplasticity of Elastomeric Materials. Experimental Facts and Constitutive Modeling. Archive of Applied Mechanics, 71, 89-109. https://doi.org/10.1007/s004190000102
Mars, W.V. and Fatemi, A. (2004) A Novel Specimen for Investigating the Mechanical Behavior of Elastomers under Multiaxial Loading Conditions. Experimental Mechanics, 44, 136-146. https://doi.org/10.1007/BF02428173
Suphadon, N., Thomas, A.G. and Busfield, J.J.C. (2009) Viscoelastic Behavior of Rubber under a Complex Loading. Polymer, 113, 693-699. https://doi.org/10.1002/app.30102
Lectez, A.S., Verron, E., Huneau, B., Béranger, A.S. and Le Brazidec, F. (2013) Characterization of Elastomers under Simultaneous Tension and Torsion for Application to Engine Mounts. In: Constitutive Models for Rubber VIII, CRC Press, Boca Raton, 585-590.
Humphrey, J.D. (2002) Cardiovascular Solid Mechanics. Springer-Verlag, New York, 758-766. https://doi.org/10.1007/978-0-387-21576-1
Rivlin, R.S. (1949) Large Elastic Deformations of Isotropic Materials VI. Further Results in the Theory of Torsion, Shear and Flexure. Philosophical Transactions of the Royal Society A, 242, 173-195. https://doi.org/10.1007/978-1-4612-2416-7_10
Rivlin, R.S. and Saunders, D.W. (1951) Large Elastic Deformations of Isotropic Materials VII. Experiments on the Deformation of Rubber. Philosophical Transactions of the Royal Society A, 243, 251-288. https://doi.org/10.1007/978-1-4612-2416-7_12
Sigaeva, T. and Czekanski, A. (2016) Coupling of Surface Effect and Hyperelasticity in Combined Tension and Torsion Deformations of a Circular Cylinder. International Journal of Solids and Structures, 85-86, 172-179. https://doi.org/10.1016/j.ijsolstr.2016.02.019
Suphadon, N. and Busfield, J.J.C. (2009) Elastic Behaviour of Rubber Cylinders under Combined Torsion and Tension Loading. Plastics Rubber and Composites, 38, 337. https://doi.org/10.1179/146580109X12473409436788
Kashaev, R.M. (2008) On Tension-Torsion Testing of Solid Cylindrical Specimens. Letters on Materials, 8, 346-352. https://doi.org/10.22226/2410-3535-2018-3-346-352
Kirkinis, E. and Ogden, R.W. (2002) On Extension and Torsion of a Compressible Elastic Circular Cylinder. Mathematics and Mechanics of Solids, 7, 373-392. https://doi.org/10.1177/108128028476
Michelle, S., Fatt, H. and Ouyang, X. (2007) Integral-Based Constitutive Equation for Rubber at High Strain Rates. International Journal of Solids and Structures, 44, 6491-6506. https://doi.org/10.1016/j.ijsolstr.2007.02.038
Lectez, A.S., Verron, E. and Huneau, B. (2014) How to Identify a Hyperelastic Constitutive Equation for Rubber-Like Materials with Multiaxial Tension-Torsion Experiments. International Journal of Non-Linear Mechanics, 65, 260-270. https://doi.org/10.1016/j.ijnonlinmec.2014.06.007
Treloar, L.R.G., Hopkins, H.G., Rivlin, R.S. and Ball, J.M. (1976) The Mechanics of Rubber Elasticity [and Discussions]. Proceedings of the Royal Society A: Mathematical Physical and Engineering Sciences, 351, 301-330. https://doi.org/10.1098/rspa.1976.0144
Rivlin, R.S. (1948) Large Elastic Deformations of Isotropic Materials, I, II, III, Fundamental Concepts. Philosophical Transactions of the Royal Society A, 240, 459. https://doi.org/10.1098/rsta.1948.0002
Yeoh, O.H. (1990) Characterization of Elastic Properties of Carbon-Black-Filled Rubber Vulcanizates. Rubber Chemistry and Technology, 63, 792-805. https://doi.org/10.5254/1.3538289
Gent, A.N. and Thomas, A.G. (1958) Forms for the Stored (Strain) Energy Function for Vulcanized Rubber. Journal of Polymer Science, 28, 625-628. https://doi.org/10.1002/pol.1958.1202811814
Fung, Y.C.B. (1967) Elasticity of Soft Tissues in Sample Elongation. American Journal of Physiology, 213, 1532-1544. https://doi.org/10.1152/ajplegacy.1967.213.6.1532
Chatelin, S., Constantinesco, A. and Willinger, R. (2010) Fifty Years of Brain Tissue Mechanical Testing: From in Vitro to in Vivo Investigations. Biorheology, 47, 255-276. https://doi.org/10.3233/BIR-2010-0576
Evans, S.L. (2017) How Can We Measure the Mechanical Properties of Soft Tissues? In: Avril, S. and Evans, S.L., Eds., Material Parameter Identification and Inverse Problems in Soft Tissue Biomechanics, Springer, London, 67-83. https://doi.org/10.1007/978-3-319-45071-1_3
Staber, B. and Guilleminot, J. (2017) Stochastic Hyperelastic Constitutive Laws and Identification Procedure for Soft Biological Tissues with Intrinsic Variability. Journal of the Mechanical Behavior of Biomedical Materials, 65, 743-752. https://doi.org/10.1016/j.jmbbm.2016.09.022
Wex, C., Arndt, S., Stoll, A., Bruns, C. and Kupriyanova, Y. (2015) Isotropic Incompressible Hyperelastic Models for Modelling the Mechanical Behaviour of Biological Tissues: A Review. Biomedical Engineering/Biomedizinische Technik, 60, 577-592. https://doi.org/10.1515/bmt-2014-0146
Hartmann, S. (2001) Numerical Studies on the Identification of the Material Parameters of Rivlin’s Hyperelasticity Using Tension-Torsion Tests. Acta Mechanica, 148, 129-155. https://doi.org/10.1007/BF01183674
Lectez, A.S. (2014) Comportement multiaxial de pièces élastomères précontraintes: Application aux suspensions moteur. Mécanique des matériaux [physics.class-ph] Ecole Centrale de Nantes, 151-170.
Kennedy, J. and Eberhart, R.C. (1995) Particle Swarm Optimization. Proceedings IEEE Conference on Neural Networks, Perth, 27 November-1 December 1995, 1942-1948.
Boehner, K., DePaula, R., Dourish, P. and Sengers, P. (2007) How Emotion Is Made and Measured. International Journal of Human-Computer Studies, 65, 275-291. https://doi.org/10.1016/j.ijhcs.2006.11.016
Shi, Y. and Eberhart, R. (1998) A Modified Particle Swarm Optimizer. IEEE International Conference on Evolutionary Computation, Anchorage, 4-9 May 1998, 69-73.
Rivlin, R.S. (1948) Large Elastic Deformations of Isotropic Materials III. Some Simple Problems in Cylindrical Polar Coordinates. Philosophical Transactions of the Royal Society A, 240, 509-525. https://doi.org/10.1007/978-1-4612-2416-7_7