Treatment of bone tumors in the mandible often involves extensive excavation of affected bone, followed by mandibular reconstruction. Prosthetic implants may be needed to restore jaw functionality. The challenges of making prosthetic bone implants include stress shielding and extending the mechanical life of the implant. We have developed a design algorithm to improve the efficiency of prosthesis design. A finite element model of the patient case is constructed from a computer tomography scan, and the computer implements topology optimization techniques to design the prosthesis with limited stress shielding affected by highly biomechanical compatibility. Topology optimization facilitates the design of low weight structures by automatically introducing holes into the structure. This is governed by engineering predetermined constraints to meet certain job specifications. Such a design will be tested for fatigue life before it is ready to be manufactured and used. Topology optimization can be performed as a design process to achieve a final design that takes stress shielding into consideration. The problem of stress shielding is solved by matching the stiffness of the orthopedic implant to the original bone that is being replaced. The material we used was titanium alloy (Ti-6Al-7Nb). Volume fraction of the orthodox implant was used (0.2872 for the studied case) as volume constraints. Compliance of the bulk bone was set as a further constraint to match the stiffness of the bone with the designed structure. Our results show a good life expectancy for the designed parts, with 12% higher life expectancy for stress-based topology optimization than for compliance-based topology optimization.
Ager, J., Balooch, G. and Ritchie, R. (2006) Fracture, Aging, and Disease in Bone. Journal of Materials Research, 21, 1878-1892. https://doi.org/10.1557/jmr.2006.0242
Anil, S., Krishnan, A.P. and Rajendran, R. (2012) Osteosarcoma of the Mandible Masquerading as a Dental Abscess: Report of a Case. Case Reports in Dentistry, 2012, 1-5. https://doi.org/10.1155/2012/635062
Shetty, V., McBrearty, D., Fourney, M. and Caputo, A.A. (1995) Fracture Line Stability as a Function of the Internal Fixation System: An in Vitro Comparison Using a Mandibular Angle Fracture Model. Journal of Oral and Maxillofacial Surgery, 53, 791-801. https://doi.org/10.1016/0278-2391(95)90335-6
Miloro, M., Ghali, G., Larsen, P. and Waite, P. (2004) Peterson’s Principles of Oral and Maxillofacial Surgery. 2nd Edition, BC Decker Inc., Canada.
Michelet, F.X., Deymes, J. and Dessus, B. (1973) Osteosynthesis with Miniaturized Screwed Plates in Maxillo-Facial Surgery. Journal of Maxillofacial Surgery, 1, 79-84. https://doi.org/10.1016/S0301-0503(73)80017-7
Jones, J.K. and Van Sickels, J.E. (1988) Rigid Fixation: A Review of Concepts and Treatment of Fractures. Oral Surgery, Oral Medicine, Oral Pathology, 65, 13-18. https://doi.org/10.1016/0030-4220(88)90183-1
Correia, A., Piloto, A., Campos, J. and Vaz, M. (2008) Finite Element Analysis of the Mechanical Behavior of a Partially Edentulous Mandible as a Function of Cancellous Bone Density. Revista Odonto Ciência, 24, 22-27.
Parr, W., Chamoli, U., Jones, A., Walsh, W. and Wroe, S. (2013) Finite Element Micro-Modelling of a Human Ankle Bone Reveals the Importance of the Trabecular Network to Mechanical Performance: New Methods for the Generation and Comparison of 3D Models. Journal of Biomechanics, 46, 200-205. https://doi.org/10.1016/j.jbiomech.2012.11.011
Deliverska, E.G. and Stoyanov, H.D. (2013) Surgical Treatment and Reconstruction for Central Giant Cell Granuloma of Mandible—Case Report and Literature Review. Journal of IMAB-Annual Proceeding Scientific Papers, 19, 407-410. https://doi.org/10.5272/jimab.2013194.407
Sutradhar, A., Park, J., Carrau, D., Nguyen, T.H., Miller, M.J. and Paulino, G.H. (2016) Designing Patient-Specific 3D Printed Craniofacial Implants Using a Novel Topology Optimization Method. Medical & Biological Engineering & Computing, 54, 1123-1135. https://doi.org/10.1007/s11517-015-1418-0
Bujtár, P., Sándor, G.K., Bojtos, A., Szucs, A. and Barabás, J. (2010) Finite Element Analysis of the Human Mandible at 3 Different Stages of Life. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 110, 301-309. https://doi.org/10.1016/j.tripleo.2010.01.025
Miche, U.A.M. (1904) The Limits of Economy of Material in Frame Structure. Philosophical Magazine, 8, 589-597. https://doi.org/10.1080/14786440409463229
Rozvany, G. (1972) Grillages of Maximum Strength and Maximum Stiffness. International Journal of Mechanical Sciences, 14, 651-666. https://doi.org/10.1016/0020-7403(72)90023-9
Bendsóe, M. and Kikuchi, N. (1988) Generating Optimal Topologies in Structural Design Using a Homogenization Method. Computer Methods in Applied Mechanics and Engineering, 71, 197-224. https://doi.org/10.1016/0045-7825(88)90086-2
Bendsoe, M.P. (1989) Optimal Shape Design as a Material Distribution Problem. Structural and Multidisciplinary Optimization, 1, 193-202. https://doi.org/10.1007/BF01650949
Guo, X., Zhang, W. and Zhong, W. (2014) Doing Topology Optimization Explicitly and Geometrically—A New Moving Morphable Components Based Framework. Journal of Applied Mechanics, 81, 081009. https://doi.org/10.1115/1.4027609
Zhang W., Chen J., Zhu X., Zhou J., Xue D. and Lei, X. (2017) Explicit Three Dimensional Topology Optimization via Moving Morphable Void (MMV) Approach. Computer Methods in Applied Mechanics and Engineering, 322,590-614. https://doi.org/10.1016/j.cma.2017.05.002
Bruggi, M. and Venini, P. (2008) A Mixed FEM Approach to Stress-Constrained topology Optimization. International Journal for Numerical Methods in Engineering, 73, 1693-1714. https://doi.org/10.1002/nme.2138
Cheng, G. and Jiang, Z. (1992) Study on Topology Optimization with Stress Constraints. Engineering Optimization, 20, 129-148. https://doi.org/10.1080/03052159208941276
Takezawa, A., Yoon, G.H., Jeong, S.H., Kobashi, M. and Kitamura, M. (2014) Structural Topology Optimization with Strength and Heat Conduction Constraints. Computer Methods in Applied Mechanics and Engineering, 276, 341-361. https://doi.org/10.1016/j.cma.2014.04.003
Lee, W., Nguyen, L. and Selvaduray, G.S. (2000) Solder Joint Fatigue Models: Review and Applicability to Chip Scale Packages. Microelectronics Reliability, 40, 231-244. https://doi.org/10.1016/S0026-2714(99)00061-X
Teoh, S. (2000) Fatigue of Biomaterials: A Review. International Journal of Fatigue, 22, 825-837. https://doi.org/10.1016/S0142-1123(00)00052-9
Roessle, M. and Fatemi, A. (2000) Strain-Controlled Fatigue Properties of Steels and Some Simple Approximations. International Journal of Fatigue, 22, 495-511. https://doi.org/10.1016/S0142-1123(00)00026-8
Prendergast, P. and Huiskes, R. (1995) The Biomechanics of Wolff’s Law: Recent Advances. Irish Journal of Medical Science, 164, 152-154. https://doi.org/10.1007/BF02973285
Cristofolini, L. (1997) A Critical Analysis of Stress Shielding Evaluation of Hip Prostheses. Critical Reviews in Biomedical Engineering, 25, 409-483. https://doi.org/10.1615/CritRevBiomedEng.v25.i4-5.30
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H. and Glogauer, M. (2015) Biodegradable Materials for Bone Repair and Tissue Engineering Applications. Materials, 8, 5744-5794. https://doi.org/10.3390/ma8095273
Ridzwan, M., Shuib, S., Hassan, A., Shokri, A. and Ibrahim, M.M. (2007) Problem of Stress Shielding and Improvement to the Hip Implant Designs: A Review. Journal of Medical Science, 7, 460-467. https://doi.org/10.3923/jms.2007.460.467
Bendsoe, M.P. and Sigmund, O. (1999) Material Interpolation Schemes in Topology Optimization. Archive of Applied Mechanics, 69, 635-654. https://doi.org/10.1007/s004190050248
Sigmund, O. and Petersson, J. (1998) Numerical Instabilities in Topology Optimization: A Survey on Procedures Dealing with Checkerboards, Mesh-Dependencies and Local Minima. Structural and Multidisciplinary Optimization, 16, 68-75. https://doi.org/10.1007/BF01214002
Jang, G.W., Jeong, J.H., Kim, Y.Y., Sheen, D., Park, C. and Kim, M.N. (2003) Checkerboardfree Topology Optimization using Nonconforming Finite Elements. International Journal for Numerical Methods in Engineering, 57, 1717-1735. https://doi.org/10.1002/nme.738
Dadalau, A., Hafla, A. and Verl, A. (2009) A New Adaptive Penalization Scheme for Topology Optimization. Production Engineering, 3, 427-434. https://doi.org/10.1007/s11740-009-0187-8
Juvinall, R.C. (1967) Engineering Considerations of Stress Strain and Strength. McGraw-Hill Book Co., New York.
Diehl, M., Glineur, F., Jarlebring, E. and Michiels, W. (2010) Recent Advances in Optimization and Its Applications in Engineering. Springer, Berlin. https://doi.org/10.1007/978-3-642-12598-0
Ursino, M. (2005) Modelling in Medicine and Biology. 5th Edition, WIT Press, Italy. https://doi.org/10.2495/BIO05
Yang, R. and Chen, C. (1996) Stress-Based Topology Optimization. Structural Optimization, 12, 98-105. https://doi.org/10.1007/BF01196941
Niinomi, M. (1998) Mechanical Properties of Biomedical Titanium Alloys. Materials Science and Engineering, 243, 231-236. https://doi.org/10.1016/S0921-5093(97)00806-X
Sutradhar, A., Paulino, G.H., Miller, M.J. and Nguyen, T.H. (2010) Topological Optimization for Designing Patient-Specific Large Craniofacial Segmental Bone Replacements. Proceedings of the National Academy of Sciences, 107, 13222-13227. https://doi.org/10.1073/pnas.1001208107