Extensive Analysis of Multi Strand Billet Caster Tundish Using Numerical Technique
- 1 Tata Steel Limited, Jamshedpur, India
- 2 Tata Steel Limited, Jamshedpur, India
- 3 Tata Steel Limited, Jamshedpur, India
- 4 Tata Steel Limited, Jamshedpur, India
- 5 Tata Steel Limited, Jamshedpur, India
Abstract
Continuous casting of steel involving different grades in the same casting sequence remains a challenge to billet caster operators. The intermixed composition obtained during the grade change does not meet the specification of either grade and must be downgraded. Incorrect identification of this intermixed region may result in non-conforming products reaching the customer. In this study, a numerical model based on CFD (computational fluid dynamics approach) has been developed which predicts the start and end of the intermixed composition and the tonnage to be downgraded under different casting conditions. This model was validated and the results were in good agreement with the actual plant data for a 6-strand billet caster at LD-1 of TATA Steel, India. This model is used to calculate transition tonnage for different scenarios, e.g. when one of the outermost strands is not functional or some combinations are not functional and varying casting speed during operation. Furthermore, impact of different design of baffles on performance of Tundish has been evaluated to find a way to reduce transition or intermixed composition.
- Chattopadhyay, K., Issac, M. and Guthrie, R.I.L. (2010) Physical and Mathematical Modelling of Steelmaking Tundish Operations: A Review of the Last Decade (1999-2009) ISIJ International, 50, 331-348. https://doi.org/10.2355/isijinternational.50.331
- Mazumdar, D. and Evans, J.W. (2009) Modelling of Steel Making Processes. CRC Press, New York, 493.
- Thomas, B.G. (1997) Modelling Study of Intermixing in Tundish and Strand during a Continuous-Casting Grade Transition. Iron and Steelmaker (ISS Transactions), 24, 83-96. https://pdfs.semanticscholar.org/47da/3ff65fce386675eb764 84868329e13e1bd3f.pdf
- Cho, M.J. and Kim I.C. (2006) Simple Tundish Mixing Model of Continuous Casting during a Grade Transition. ISIJ International, 46, 1416-1420. https://doi.org/10.2355/isijinternational.46.1416
- Huang, X. and Thomas, B.G. (1996) Intermixing Model of Continuous Casting during a Grade Transition. Metallurgical and Materials Transactions B, 27, 617-632. https://doi.org/10.1007/BF02915660
- Goldschmit, M.B., Ferro, S.P., Walter, G.F., Aranda, V.G. and Morelos, J.A.T. (2001) Numerical Model for the Minimization of Intermixed Round Bars in a Four-Line Continuous Caster. Metallurgical and Materials Transactions B, 32, 537-546. https://doi.org/10.1007/s11663-001-0038-2
- Merder, T. and Marek, W. (2012) Optimization of a Six-Strand Continuous Casting Tundish: Industrial Measurements and Numerical Investigation of the Tundish Modifications. Metallurgical and Materials Transactions B, 43, 856-868. https://doi.org/10.1007/s11663-012-9662-2
- Chen, C., Jonsson, L.T.I., Tilliander, A.,Cheng, G. and Jönsson, P.G. (2015) A Mathematical Modeling Study of Tracer Mixing in a Continuous Casting Tundish. Metallurgical and Materials Transactions B, 46, 169-190. https://doi.org/10.1007/s11663-014-0190-0
- Merder, T. (2012) Numerical Simulation of Liquid Flow and Mixing Steel in Multi-Strands Tundish. Journal of Achievements in Materials and Manufacturing Engineering, 55, 561-566.
- Gupta, S. and Dewan, A. (2013) Performance Optimization of a Six-Strand Tundish. World Journal of Mechanics, 3, 184-193.
- Jha, P.K. and Dash, S.K. (2002) Effect of Outlet Positions and Various Turbulence Models on Mixing in a Single and Multi-Strand Tundish. International Journal of Numerical Methods for Heat & Fluid Flow, 12, 560-584. https://doi.org/10.1108/09615530210434296
- Thakre, B., Kothare, C.B. and Raizada, K.S. (2015) Thermal Analysis of Tundish in Continuous Casting Machine in Steel Industry: A Review. International Research Journal of Engineering and Technology (IRJET), 2, 255-288.