In the present investigation, the effect of two different mineral nano clays and a synthetic nano layered silicate on the properties of a transparent polyurethane resin has been studied. Both high rotator Torusmill and high intensity ultrasonic deagglomerator are utilized for the dispersion process. Observations by means of the X-ray diffraction technique indi cate the presence of different dispersion status of nano layers in polymer matrix. The optical effect of nano-filled clear coat was studied using goniospectrophotometer and compared with a blank clear coat to determine if it can be identified by human eye. Scratch and mar resistance tests presented considerable improvement. Gloss retention against rubbing increased significantly in the presence of merely 3 wt% of synthetic nano-filler .
B. V. Gregorovich, K. Adamsons and L. Lin, “Scratch and Mar and Other Mechanical Properties as a Function of Chemical Structure for Automotive Refinish Coatings,” Progress in Organic Coatings, Vol. 43, No. 1-3, 2001, pp. 175-187. doi:10.1016/S0300-9440(01)00187-4
L. Lin, G. S. Blackman and R. R. Matheson, “Quantitative Characterization of Scratch and Mar Behavior of Polymer Coatings,” Materials Science and Engineering, Vol. 317, No. 1-2, 2001, pp. 163-170. doi:10.1016/S0921-5093(01)01159-5
A. Krupicka, M. Johansson and A. Hult, “Use and Interpretation of Scratch Tests on Ductile Polymer Coatings,” Progress in Organic Coatings, Vol. 46, No. 1, 2003, pp. 32-48. doi:10.1016/S0300-9440(02)00184-4
M. Groenewolt, “Highly Scratch Resistant Coatings for Automotive Applications,” Progress in Organic Coatings, Vol. 61, No. 2-4, 2008, pp. 106-109. doi:10.1016/j.porgcoat.2007.07.036
E. Barna, B. Bommer, J. Kursteiner, A. Vital, O. V. Trzebiatowski, W. Koch, B. Schmid and T. Graule, “Innovative, Scratch Proof Nanocomposites for Clear Coatings,” Composites Part A, Vol. 36, No. 4, 2005, pp. 473-480. doi:10.1016/j.compositesa.2004.10.014
Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi and O. Kamigaito, “Mechanical Properties of Nylon 6-Clay Hybrid,” Journal of Materials Research, Vol. 8, No. 5, 1993, pp. 1185-1189. doi:10.1557/JMR.1993.1185
A. Okada and A. Usuki, “The Chemistry of Polymer-Clay Hybrids,” Materials Science and Engineering: C, Vol. 3, No. 2, 1995, pp. 109-115. doi:10.1016/0928-4931(95)00110-7
P. Messersmith and E. P. Giannelis, “Synthesis and Characterization of Layered Silicate-Epoxy Nanocomposites,” Chemistry of Materials, Vol. 6, No. 10, 1994, pp. 1719-1725. doi:10.1021/cm00046a026
S. Manne and I. A. Aksay, “Thin Films and Nanolaminates Incorporating Organic/Inorganic Interfaces,” Current Opinion in Solid State & Materials Science, Vol. 2, No. 3, 1997, pp. 358-364. doi:10.1016/S1359-0286(97)80128-3
T, Lan and T. J. Pinnavaia, “Clay-Reinforced Epoxy Nanocomposites,” Chemistry of Materials, Vol. 6, No. 12, 1994, pp. 2216-2219. doi:10.1021/cm00048a006
H. Shi, T. Lan and T. J. Pinnavaia, “Interfacial Effects on the Reinforcement Properties of Polymer-Organoclay Nanocomposites,” Chemistry of Materials, Vol. 8, No. 8, 1996, pp. 1584-1587. doi:10.1021/cm960227m
B. Ahmadi, S. M. Kassiriha, K. Khodabakhshi and E. R. Mafi, “Effect of Nano Layered Silicates on Automotive Polyurethane Refinish Clear Coat,” Progress in Organic Coatings, Vol. 60, No. 2, 2007, pp. 99-104. doi:10.1016/j.porgcoat.2007.07.008
J. W. Gilman, “Flammability and Thermal Stability Studies of Polymer Layered-Silicate (Clay) Nanocomposites,” Applied Clay Science, Vol. 15, No. 1-2, 1999, pp. 31-49. doi:10.1016/S0169-1317(99)00019-8
F. Dietsche and R. Mulhaupt, “Thermal Properties and Flammability of Acrylic Nanocomposites Based Upon Organophilic Layered,” Polymer Bulletin, Vol. 43, No. , 1999, pp. 395-402. doi:10.1007/s002890050627
D. Porter, E. Metcalfe and M. J. K. Thomas, “Nanocomposite Fire Retardants—A Review,” Fire Mater, Vol. 24, No. 1, 2000, pp. 45-52. doi:10.1002/(SICI)1099-1018(200001/02)24:1 3.0.CO;2-S
J. W. Gilman, C. L. Jackson, A. B. Morgan, R. Harris, E. Manias, E. P. Giannelis, et al., “Flammability Properties of Polymer?Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites,” Chemistry of Materials, Vol. 12, No. 7, 2000, pp. 1866-1873. doi:10.1021/cm0001760
K. Yano, Y. Kojima, A. Usuki, A. Okada, T. Kurauchi and O. Kamigaito, “Synthesis and Properties of Polyimide-Clay Hybrid,” Journal of Polymer Science Part A: Polymer Chemistry, Vol. 31, No. 10, 1993, pp. 2493-2498. doi:10.1002/pola.1993.080311009
T. Lan, P. D. Kaviratna and T. J. Pinnavaia, “On the Nature of Polyimide-Clay Hybrid Composites,” Chemistry of Materials, Vol. 6, No. 5, 1994, pp. 573-575. doi:10.1021/cm00041a002
P. B. Messersmith and E. P. Giannelis, “Synthesis and Barrier Properties Of Poly( -caprolactone)-Layered Silicate Nanocomposites,” Journal of Polymer Science Part A: Polymer Chemistry, Vol. 33, No. 7, 1995, pp. 1047-1057. doi:10.1002/pola.1995.080330707
S. D. Burnside and E. P. Giannelis, “Synthesis and Properties of New Poly(dimethylsiloxane) Nanocomposites,” Chemistry of Materials, Vol. 7, No. 9, 1995, pp. 1597-1600. doi:10.1021/cm00057a001
M. S. Cho, H. J. Choi and K. To, “Effect of Ionic Pendent Groups on a Polyaniline-Based Electrorheological Fluid,” Macromolecular Rapid Communications, Vol. 19, No. 6, 1998, pp. 271-273. doi:10.1002/(SICI)1521-3927(19980601)19:6 3.0.CO;2-O
S. G. Kim, J. W. Kim, M. S. Cho, H. J. Choi and M. S. Jhon, “Viscoelastic Characterization of Semiconducting Dodecylbenzenesulfonic Acid Doped Polyaniline Electrorheological Suspensions,” Journal of Applied Polymer Science, Vol. 79, No. 1, 2000, pp. 108-114. doi:10.1002/1097-4628(20010103)79:1 3.0.CO;2-8
J. M. Yeh, S. J. Liou, C. Y. Lin, C. Y. Cheng, Y. W. Chang and K. R. Lee, “Anticorrosively Enhanced PMMA-Clay Nanocomposite Materials with Quaternary Alkyl-phosphonium Salt as an Intercalating Agent,” Chemistry of Materials, Vol. 14, No. 1, 2002, pp. 154-161. doi:10.1021/cm010337f
J. M. Yeh, S. J. Liou, M. C. Lai, Y. W. Chang, C. Y. Huang, C. P. Chen, et al., “Comparative Studies of the Properties of Poly(methyl methacrylate)-Clay Nanocomposite Materials Prepared by in Situ Emulsion Polymerization and Solution Dispersion,” Journal of Applied Polymer Science, Vol. 94, No. 5, 2004, pp. 1936-1946. doi:10.1002/app.21095
J. M. Yeh, S. J. Liou, H. J. Lu and H. Y. Huang, “Enhancement of Corrosion Protection Effect of Poly (Styrene-Co-Acrylonitrile) by the Incorporation of Nanolayers of Montmorillonite Clay into Copolymer Matrix,” Journal of Applied Polymer Science, Vol. 92, No. 4, 2004, pp. 2269-2277. doi:10.1002/app.20232
J. M. Yeh, S. J. Liou, C. G. Lin, Y. P. Chang, Y. H. Yu and C. F. Cheng, “Effective Enhancement of Anticorrosive Properties of Polystyrene by Polystyrene-Clay Nanocomposite Materials,” Journal of Applied Polymer Science, Vol. 92, No. 3, 2004, pp. 1970-1976. doi:10.1002/app.13436
J. M. Yeh, C. L. Chen, Y. C. Chen, C. Y. Ma, H. Y. Huang, Y. H. Yu, “Enhanced Corrosion Prevention Effect of Polysulfone-Clay Nanocomposite Materials Prepared by Solution Dispersion,” Journal of Applied Polymer Science, Vol. Vol. 92, No. 1, 2004, pp. 631-637. doi:10.1002/app.13435
J. M. Yeh, H. Y. Huang, C. L. Chen, W. F. Su and Y. H. Yu “Siloxane-Modified Epoxy Resin-Clay Nanocomposite Coatings with Advanced Anticorrosive Properties Prepared by a Solution Dispersion Approach,” Surface and Coatings Technology, Vol. 200, No. 8, 2006, pp. 2753-2763. doi:10.1016/j.surfcoat.2004.11.008
Y. H. Yu, J. M. Yeh, S. J. Liou and Y. P. Chang, “Organo-Soluble Polyimide (TBAPP-OPDA)/Clay Nano-composite Materials with Advanced Anticorrosive Properties Prepared from Solution Dispersion Technique,” Acta Materialia, Vol. 52, No. 2, 2004, pp. 475-486. doi:10.1016/j.actamat.2003.09.031
J. M. Yeh, C. F. Hsieh, J. H. Jaw, T. H. Kuo, H. Y. Huang, C. L. Lin, et al., “Organo-Soluble Polyimde (ODA-BSAA)/Montmorillonite Nanocomposite Materials Prepared by Solution Dispersion Technique,” Journal of Applied Polymer Science, Vol. 95, No. 5, 2005, pp. 1082-1090. doi:10.1002/app.21317
Y. H. Yu, J. M. Yeh, S. J. Liou, C. L. Chen, D. J. Liaw and H. Y. Lu, “Preparation and Properties of Polyimide-Clay Nanocomposite Materials for Anticorrosion Application,” Journal of Applied Polymer Science, Vol. 92, No. 6, 2004, pp. 3573-3582.
J. M. Yeh, C. L. Chen, T. H. Kuo, W. F. Su, H. Y. Huang, D. J. Liaw, et al., “Preparation and Properties of (BATB-ODPA) Polyimide-Clay Nanocomposite Materials,” Journal of Applied Polymer Science, Vol. 92, No. 2, 2004, pp. 1072-1079. doi:10.1002/app.13437
J. M. Yeh, S. J. Liou, C. Y. Lai, P. C. Wu, T. Y. Tsai, “Enhancement of Corrosion Protection Effect in Polyaniline via the Formation of Polyaniline-Clay Nanocomposite Materials,” Chemistry of Materials, Vol. 13, No. 3, 2001, pp. 1131-1136. doi:10.1021/cm000938r
J. M. Yeh, C. L. Chen, Y. C. Chen, C. Y. Ma, K. R. Lee, Y. Wei, et al., “Enhancement of Corrosion Protection Effect of Poly(o-ethoxyaniline) via the Formation of Poly(o-ethoxyaniline)-Clay Nanocomposite Materials,” Polymer, Vol. 43, No. 9, 2002, pp. 2729-2736. doi:10.1016/S0032-3861(02)00005-8
K. C. Chang, M. C. Lai, C. W. Peng, Y. T. Chen, J. M. Yeh, C. L. Lin, et al., “Comparative Studies on the Corrosion Protection Effect of DBSA-Doped Polyaniline Prepared from in Situ Emulsion Polymerization in the Pres- ence of Hydrophilic Na+-MMT and Organophilic Organo-MMT Clay Platelets,” Electrochimica Acta, Vol. 51, No. 26, 2006, pp. 5645-5653. doi:10.1016/j.electacta.2006.02.039
Y. H. Yu, C. C. Jen, H. Y. Huang, P. C. Wu, C. C. Huang and J. M. Yeh, “Preparation and Properties of Heterocyclically Conjugated Poly(3-hexylthiophene)-Clay Nano-composite Materials,” Journal of Applied Polymer Science, Vol. 91, No. 6, 2004, pp. 3438-3446. doi:10.1002/app.13457
J. M. Yeh, C. P. Chin and S. Chang, “Enhanced Corrosion Protection Coatings Prepared from Soluble Electronically Conductive Polypyrrole-Clay Nanocomposite Materials,” Journal of Applied Polymer Science, Vol. 88, No. 14, 2003, pp. 3264-3272. doi:10.1002/app.12146
J. M. Yeh and C. P. Chin, “Structure and Properties of Poly(o-methoxyaniline)-Clay Nanocomposite Materials,” Journal of Applied Polymer Science, Vol. 88, No. 4, 2003, pp. 1072-1080.
R. E. Grim, “Clay Mineralogy,” second ed., New York: McGraw Hill, 1968, p.362.
R. Tantatherdtam, “Reinforcement of Natural Rubber Latex by Nanosize Montmorillonite Clay,” Ph.D. Thesis, Department of Materials Science and Engineering, University Park, 2003.
E. P. Giannelis, “Polymer Layered Silicate Nanocompo-Sites,” Advanced Materials, Vol. 8, No. 1, 1996, pp. 29-35. doi:10.1002/app.12146
P. C. LeBaron, Z. Wang and T. J. Pinnavaia, “Polymer-Layered Silicate Nanocomposites: An Overview,” Applied Clay Science, Vol. 15, No. 1-2, 1999, pp. 11-29. doi:10.1016/S0169-1317(99)00017-4
Y. Fukushima and S. Inagaki, “Synthesis of an Intercalated Compound of Montmorillonite and 6-Polyamide,” Journal of Inclusion Phenomena and Macrocyclic Chemistry, Vol. 5, No. 4, 1987, pp. 473-482. doi:10.1007/BF00664105
R. S. Berns, “Billmeyer and Saltzman’s Principles of Color Technology,” Third Edition, Wiley, New York, 2000, p. 127.