Experimental Investigation on Fuel Coolant Interaction Using Simulant Ceramic Melts in Water: Insights and Conclusions
- 1 Homi Bhabha National Institute, Mumbai, India
- 2 Bhabha Atomic Research Centre, Reactor Engineering Division, Mumbai, India
- 3 Bhabha Atomic Research Centre, Reactor Engineering Division, Mumbai, India
Abstract
Steam explosion is one of the crucial and poorly understood phenomena which may occur during severe accident scenario and may lead to containment failure. In spite of several experimental and analytical studies, the root cause of steam explosion has not been understood. Recent claims in the literature suggest that the presence of fine fragmentation during steam explosion causes its occurrence. In order to investigate this and understand the root cause of steam explosion, series of experiments were performed with 50 g to 2500 g of CaO-B 2 O 3 , a corium simulant in 4.5 litre of water. It was observed that steam explosion may occur even in the absence of fine fragments, which is contrary to the claims in the literature. To investigate further, conversion efficiency analysis was performed. This suggested that the amount of thermal energy converted to mechanical energy is more important deciding factor in explaining the occurrence of steam explosion. The present study discusses the importance of conversion efficiency in deciding steam explosion and also gives a new perspective to look at steam explosion phenomenology.
- Sehgal, B.R. (2012) Nuclear Safety in Light Water Reactors. Elsevier Inc., Amsterdam.
- Board, S.J., Hall, R.W. and Hall, R.S. (1975) Detonation of a Fuel Coolant Explosion. Nature, 254, 319-321. https://doi.org/10.1038/254319a0
- Fletcher, D.F. and Theofanous, T.G. (1997) Heat Transfer and Fluid Dynamics Aspects of Explosive Melt-Water Interactions. Advances in Heat Transfer, 29, 129-133. https://doi.org/10.1016/S0065-2717(08)70185-0
- Berthoud, G. (2000) Vapor Explosions. Annual Review of Fluid Mechanics, 32, 573-611. https://doi.org/10.1146/annurev.fluid.32.1.573
- OECD/NEA Reports (2007 and 2015) Steam Explosions.
- Magallon, D., Huhtiniemi, I. and Hohmann, H. (1999) Lessons Learnt from FARO/ TERMOS Corium Melt Quenching Experiments. Nuclear Engineering and Design, 189, 223-238. https://doi.org/10.1016/S0029-5493(98)00274-X
- Magallon, D. and Huhtiniemi, I. (2001) Corium Melt Quenching Tests at Low Pressure and Subcooled Water in FARO. Nuclear Engineering and Design, 204, 369-376. https://doi.org/10.1016/S0029-5493(00)00318-6
- Magallon, D. (2006) Characteristics of Corium Debris Beds Generated in Large-Scale Fuel-Coolant Interaction Experiments. Nuclear Engineering and Design, 236, 1998-2009. https://doi.org/10.1016/j.nucengdes.2006.03.038
- Kaiser, A., Huber, F. and Wilhelm, D. (1998) Experiments on the Behaviour of a Hot Melt Injected into Sodium. Experimental Thermal and Fluid Science, 18, 48-69. https://doi.org/10.1016/S0894-1777(98)10008-0
- Moriyama, K., Maruyama, Y. and Nakamura, H. (2002) A Simple Evaluation Method of the Molten Fuel Amount in a Premixing Region of Fuel-Coolant Interactions. Journal of Nuclear Science and Technology, 39, 53-58. https://doi.org/10.1080/18811248.2002.9715156
- Corradini, M.L., Kim, B.J. and Oh, M.D. (1988) Vapor Explosions in Light Water-Reactors—A Review of Theory and Modeling. Progress in Nuclear Energy, 22, 1-117. https://doi.org/10.1016/0149-1970(88)90004-2
- Corradini, M.L. (1991) Vapor Explosions: A Review of Experiments for Accident Analysis. Nuclear Safety, 32, 337-362.
- Cho, D.H., Armstrong, D.R. and Anderson, R.P. (1995) Combined Vapor and Chemical Explosions of Metals and Water. Nuclear Engineering and Design, 155, 405-412. https://doi.org/10.1016/0029-5493(94)00885-3
- Mitchell, D.E., Corradini, M.L. and Tarbell, W.W. (1981) Intermediate Scale Steam Explosion Phenomena: Experiments and Analysis. NUREG/CR-2145, SAND81-0124.