Research ArticleOpen AccessGoogle Scholar indexed
Localization of Plastic Deformation in Copper Canisters for Spent Nuclear Fuel
- 1
- 2
- 3
World Journal of Nuclear Science and Technology·Volume 02 (2012)·Pages 16–22·Published 4 January 2012·DOI10.4236/wjnst.2012.21003
Copy link · social · email
Abstract
Localization of plastic deformation in different parts (extruded and forged base materials as well as EB and FSW welds) of the corrosion barrier copper canister for final disposal of spent nuclear fuel was studied using tensile testing, optical strain measurement, scanning electron microscopy (SEM), and electron back-scatter diffraction (EBSD). Results show that in the base materials plastic deformation occurs very uniformly. In FSW welds the deformation localizes in the weld either at the processing line or at a line of entrapped oxide particles. In EB welds the deformation localizes to the equally oriented large grains at the weld centreline or at the steep grain size gradient in the fusion line.
KeywordsCopperDeformationLocalizationFriction stir WeldingElectron Beam Welding
- B. Rosborg and L. Werme, “The Swedish Nuclear Waste Program and the Long-Term Corrosion Behaviour of Copper,” Journal of Nuclear Materials, Vol. 379, No. 1-3, 2008, pp. 142-153. doi:10.1016/j.jnucmat.2008.06.025
- D. W. Shoesmith, “Assessing the Corrosion Performance of High-Level Nuclear Waste Containers,” Corrosion, Vol. 62, No. 8, 2006, pp. 703-722. doi:10.5006/1.3278296
- B. Wilshire and C. J. Palmer, “Strain Accumulation during Dislocation Creep of Prestrained Copper,” Materials Science and Engineering: A, Vol. 387-389, 2004, pp. 716- 718.
- U. Ehrnstèn, P. Aaltonen, P. Nenonen, H. H?nninen, C. Jansson and T. Angeliu, “Intergranular Cracking of AISI 316 NG Stainless Steel is BWR Environment,” Proceedings of the Tenth Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Lake Tahoe, Nevada, 5-9 August 2001.
- S. Kou, “Welding Metallurgy,” 2nd Edition, John Wiley and Sons, New York, 2003.
- L. Cederqvist, “FSW to Seal 50 mm Thick Copper Canisters—A Weld that Lasts for 100,000 Years,” Proceedings of the Fifth International Friction Stir Welding Conference, Metz, France, 14-16 September 2004.
- W. D. Lockwood and A. P. Reynolds, “Simulation of the Global Response of a Friction Stir Weld Using Local Constitutive Behaviour,” Materials Science and Engineering A, Vol. 339, No. 1-2, 2003, pp. 35-42.
- C. Genevois, A. Deschamps and P. Vacher, “Comparative Study on Local and Global Mechanical Properties of 2024 T351, 2024 T6 and 5251 O Friction Stir Welds,” Materials Science and Engineering A, Vol. 415, No. 1-2, 2006, pp. 162-170.
- W. D. Lockwood, B. Tomaz and A. P. Reynolds, “Mechanical Response of Friction Stir Welded AA2024: Experiment and Modelling,” Materials Science and Engineering A, Vol. 323, No. 1-2, 2002, pp. 348-353.
- K. Savolainen, T. Saukkonen and H. H?nninen, “Banding in Copper Friction Stir Weld,” Science and Technology of Welding & Joining. doi:10.1179/1362171811Y.0000000089
- T. Saukkonen, K. Savolainen, J. Mononen and H. H?nninen, “Microstructure and Texture Analysis of Friction Stir Welds of Copper,” In: A. D. Rollet, Ed., Materials Processing and Texture: A Collection of Papers Presented at the 15th International Conference on Textures of Materials, John Wiley & Sons, Hoboken, 2008, pp. 53-60.
- K. Savolainen, T. Saukkonen and H. H?nninen, “Optical Strain Measurement of Plastic Strain Localization in Nuclear Waste Copper Canisters,” Proceedings of Baltica VIII—International Conference on Life Management and Maintenance for Nuclear Power Plants, VTT, Espoo, Finland, 9-14 August 2009, pp. 163-177.