Determination of Full Energy Peak Efficiency of NaI(Tl) Detector Depending on Efficiency Transfer Principle for Conversion Form Experimental Values
- 1 Department of Basic and Applied Science, Faculty of Engineering, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
- 2 Physics Department, Faculty of Science, Alexandria University, Alexandria, Egypt
- 3 Physics Department, Faculty of Science, Alexandria University, Alexandria, Egypt
- 4 Department of Basic and Applied Science, Faculty of Engineering, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
Abstract
In this work we calibrated the NaI(Tl) scintillation detectors (5.08 × 5.08 cm 2 and 7.62 × 7.62 cm 2 ) and the Full Energy Peak Efficiency (FEPE) for these detectors have been calculated for point sources placed at different positions on the detector axis using the analytical approach of the effective solid angle ratio. This approach is based on the direct mathematical method reported by Selim and Abbas [1,2] and has been used successfully before to calibrate the cylindrical, parallelepiped, and 4π NaI(Tl) detectors by using point, plane and volumetric sources. In addition, the present method is free of some major inconveniences of the conventional methods.
- Y. S. Selim and M. I. Abbas, “Source-Detector Geometrical Efficiency,” Radiation Physics and Chemistry, Vol. 44, No. 1-2, 1994, pp. 1-4.doi:10.1016/0969-806X(94)90093-0
- Y. S. Selim and M. I. Abbas, “Direct Calculation of the Total Efficiency Cylindrical Scintillation Detectors for Extended Circular Sources,” Radiation Physics and Chemistry, Vol. 48, No. 1, 1996, pp. 23-27.doi:10.1016/0969-806X(95)00047-2
- V. Tim, B. Vodenik and M. Necemer, “Efficiency Transfer between Extended Sources,” Applied Radiation and Isotopes, Vol. 68, No. 12, 2010, pp. 2352-2354.doi:10.1016/j.apradiso.2010.05.010
- M. C. Lepy, et al., “Intercomparison of Efficiency Transfer Software for Gamma-Ray Spectrometry,” Applied Radiation and Isotopes, Vol. 55, No. 4, 2001, pp. 493-503.
- T. Vidmar, et al., “An Intercomparison of Monte Carlo Codes Used in Gamma-Ray Spectrometry,” Applied Radiation and Isotopes, Vol. 66, No. 6-7, 2008, pp. 764-768.doi:10.1016/j.apradiso.2008.02.015
- F. Piton, et al., “Efficiency Transfer and Coincidence Summing Corrections for Gamma-Ray Spectrometry,” Applied Radiation and Isotopes, Vol. 52, No. 3, 2000, pp. 791-795. doi:10.1016/S0969-8043(99)00246-8
- S. Jovanovic, et al., “ANGLE: A PC-Code for Semiconductor Detector Efficiency Calculations,” Radiation Physics and Chemistry, Vol. 218, No. 1, 1997, pp. 13-20.
- M. S. Badawi, “Faculty of Science,” Ph.D. Thesis, Alexandria University, Egypt, 2009.
- M. I. Abbas, “HPGe Detector Absolute Full-Energy Peak Efficiency Calibration Including Coincidence Correction for Circular Disc Sources,” Journal of Physics D: Applied Physics, Vol. 39, No. 18, 2006, pp. 3952-3958.doi:10.1088/0022-3727/39/18/005
- K. Debertin and U. Schotzig, “Coincidence Summing Corrections in Ge(Li)-Spectrometry at Low Source-toDetector Distances,” Nuclear Instruments and Methods, Vol. 158, 1979, pp. 471-477.
- M.-C. Lépy, M.-M. Bé and F. Piton, “ETNA (Efficiency Transfer for Nuclide Activity measurements) Software for Efficiency Transfer and Coincidence Summing Corrections in Gamma-Ray Spectrometry,” CEA-SACLAY, DA-MRI-LNHB, Bat.602, 91191 GIF-SUR-YVETTE CEDEX, France, 2004.