ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Advances in Chemical Engineering and Science (ACES) is an international journal serving as a forum for the presentation of research and review papers dealing with all aspects of advances in chemical engineering and science. All manuscripts must be prepared in English and are subject to a rigorous and fair peer-review…
Sungho Lee, Do-Hwan Kim, Jae-Ha Park, Min Park, Han-Ik Joh, Bon-Cheol Ku
Commercial poly( p -phenylene sulfide) (PPS) was thermally cured, which resulted in an increase of molecular weight due to cross-linking. Non-isothermal crystallization studies of samples cured for up to 7 days at 250?C showed a monotonous increase of crystal…
Barnasan Purevsuren, Yadamsuren Davaajav, Sanjaa Batbilig, Jargalsaikhan Namkhainorov, Fatma Karaca, Trevor J. Morgan, Patricia Alvarez Rodriguez, Feng H. Tay, Sergei Kazarian, Alan A. Herod, Rafael Kandiyoti
Tars from two Mongolian coals (Tavan Tolgoi and Baganuur) produced by simple distillation have been characterized using size exclusion chromatography (SEC) with elution in both 1-methyl-2-pyrrolidinone (NMP) and a mixed solvent (NMP and chloroform), UV-fluore…
Amadou Kouyate, Ange Privat Ahoussou, Jacques Rogez, Pierre Benigni
Bioactive glasses in the system SiO 2 -Na 2 O-CaO-P 2 O 5 were prepared by the conventional melting process at a high temperature in an electric furnace. The densities of the glasses as well as their glass transition temperatures were measured experimentally.…
Atheel Hassan Alwash, Ahmad Zuhairi Abdullah, Norli Ismail
The Zeolite Y as a support was modified by the incorporating of Fe and TiO 2 in one single step using impregnation method. The synergistic effects between those components enhance the catalytic activity for the degradation of amaranth dye under ultrasonic irr…
Kuan-Ru Chen, Hsiu-Feng Yeh, Hung-Chih Chen, Ta-Jo Liu, Shu-Jiuan Huang, Ping-Yao Wu, Carlos Tiu
Three coating methods (slot, dip and blade coatings) were used separately to coat a well-dispersed single-wall carbonnanotube (SWCNT) solution on polyethylene terephthalate (PET) film, and the resulting optical and electronic properties were measured and comp…
Michel. F. Abdel-Messih
The kinetics of the formation of 1:1 complex of chromium(III) with ethylenediaminetetra-3-propinate (EDTP) was followed spectrophotometrically at l max = 557 nm. The reaction was found to be first order in chromium(III) and was accelerated by EDTP. Increasing…
Jacob Kiptanui Koech, Qun Shao, Fredrick Nzioka Mutua, Yimin Wang
Octa(aminophenyl)silsesquioxane (OAPS) was prepared from octaphenyl silsesquioxane (OPS) in two steps, first nitration to obtain Octa(nitrophenyl)silsesquioxane (ONPS) then reduction by using the stable, inexpensive, and readily available hydrazine hydrate as…
Abdellah Eid, Ouarda Benlounes, Hikmat S. Hilal, Chérifa Rabia, Smain Hocine
The catalytic dehydrocyclization of n-hexane was studied here for the first time using a number of compounds based on H 3 PMo 12 O 40 . The described catalysts were prepared by either replacing the acidic proton with counter-ions such as ammonium or transitio…
Madjid Arab, Marjorie David, Jean-Christophe Valmalette, Christophe Ramseyer
Carbon nanotubes flower (CNTs-F) films were prepared by catalytic chemical vapor deposition (CVD) on a platinum (Pt) thin layer, supported on a silicon wafer. The products were synthesized from an aerosol composed of ferrocene and toluene, as catalyst and car…
A. M. Amdur, V. V. Pavlov, Barnasan Purevsuren, Lkhamsuren Munkhtuul
The role of carbon black is especially important in cokeless metallurgy. Carbon black can be isolated at less hot zones (less than 720 ) in metallurgical ovens according to equation of Buduara: 2CO = C + CO 2 . The particles of carbon black obtained by the re…
No articles in this issue.
Advances in Chemical Engineering and Science (ACES) is an international journal serving as a forum for the presentation of research and review papers dealing with all aspects of advances in chemical engineering and science. All manuscripts must be prepared in English and are subject to a rigorous and fair peer-review… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).