ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Xuhui He, Jun Fang, Andrew Scanlon, Zhengqing Chen
The wind-rain induced vibration phenomena in the Dongting Lake Bridge (DLB) can be observed every year, and the field measurements of wind speed data of the bridge are usually nonstationary. Nonstationary wind speed can be decomposed into a deterministic time…
Hala Mohamed Abdel Mageed, Ahmed Faheem Zobaa, Mohamed Helmy Abdel Raouf, Abla Hosni Abd El-Rahman, Mohamed Mamdouh Abdel Aziz
The temperature effects on the electrical performance of a large area multicrystalline silicon solar cell with back-contact technology have been studied in a desert area under ambient conditions using the current shunt measuring technique. Therefore, most of…
Tapas K. Maiti, Animesh Banerjee, Chinmay K. Maiti
In this paper, a charge sheet surface potential based model for strained-Si nMOSFETs is presented and validated with numerical simulation. The model considers sub band splitting in the 2-DEG at the top heterointerface in SiGe layer and also the dependence of…
Islam H. Afefy
This paper describes the application of reliability-centered maintenance methodology to the development of maintenance plan for a steam-process plant. The main objective of reliability-centered maintenance is the cost-effective maintenance of the plant compon…
Alireza Keshavarzi, Mehdi Valizadeh, James Ball
This paper aims to understand the flow structure around submerged dike in the main channel and flood plain of a compound cross section. The study undertaken to develop this understanding was carried out in a laboratory flume using a submerged vane installed a…
Ching F. Yong, Eddie Y. K. Ng, Wei D. Zhou, Wan K. Ng
This paper presents the studies of the performance of an improved femto air bearing slider which is optimized based on the past studies and effort. The flying characteristics performance of this novel femto slider is relatively stable over different radii. Th…
Shanmugasundaram Sankar, Maasanamuthu Sundar Raj, Muthusamy Nataraj
This paper examines the tooth failure in spur gears. Corrective measures are taken to avoid tooth damage by introducing profile modification in root fillet. In general, spur gear with less than 17 numbers of teeth had the problem of undercutting during gear m…
Ebene Ufot, Barinaadaa Thaddeus Lebele-Alawa, Ibiba Emmanuel Douglas, Kelvin D. H. Bob-Manuel
Thermal stresses in the combustor of gas-turbines are computed using non-dimensional parameters. Buckingham pi theorem was used to arrange the listed relevant parameters into non-dimensional groups. In testing the validity of the functional relation of the no…
Bolesław Porankiewicz, Jari Parantainen, Karolina Ostrowska
Rolling path squeezes and rolling residual stresses of large diameter circular saw body for wood, generated by rolling pressure from 10 up to 120 bar were examined. X-ray diffraction, Barkhausen noise (BN) and Full Width of the peak at a Half Maximum (FWHM) (…
Chak Yin Tang, Wai Chan, Chi Pong Tsui
Unrelieved pressure on load-bearing muscle tissues of humans can produce pressure ulcers. In a seated upright posture, the highest pressures occur inferior to the ischial tuberosities (ITs). Moreover, the vibration can initiate the development of pressure ulc…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).