ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Ruicheng Li
In this paper, we are concerned with output feedback stabilization for a one-dimensional anti-stable wave equation with disturbance. First, we design a disturbance estimator for the original system. Then, we propose an output feedback controller for the origi…
Lars Bengtsson
This work describes how a control algorithm can be implemented in a small (8-bit) microcontroller for the main purpose of merging embedded systems and control theory in electrical engineering undergraduate classes. Two different methods for discretizing the c…
M. Bank
Water enters the fountains of Peterhof naturally through a system of locks, canals, reservoirs and springs from the Ropsha heights, and the height of the jets can vary depending on their filling. Pumps were never used in Peterhof. Tourists from all over the w…
Assies Ahmad, Adil Loya, Muhammad Ali, Ammar Iqbal, Faiq Masood Baig, Abdul Manan Afzal
There are multiple approaches of design for Vertical Axis Wind Turbines (VAWT) that have been studied by engineers and leaps have been made in high performing innovations. By harnessing the energy from these wind turbines, the problem of roadside lights short…
Karimov Abdusamat Ismonovich, Ismanov Muhammadziyo
The scientific article examines the physical and mechanical properties of raw cotton stored in buntings in cotton palaces. Because during the storage of raw cotton in bunts, some of its properties deteriorate, some improvements. Therefore, the mathematical mo…
Qianghui Xiao, Huan Jin, Xueyi Zhang
When solving the routing problem with traditional ant colony algorithm, there is scarce in initialize pheromone and a slow convergence and stagnation for the complex network topology and the time-varying characteristics of channel in power line carrier commun…
Bo Feng, Sumei Jia, Guosheng Feng
To maintain the safety of an open-type hot-metal car and to reduce wheel-rail wear during transportation, simulation models of the main components of such car were built using Pro/E software and then tested. In particular, the Pro/E models were imported into…
Riichi Murayama, Benjie Wang, Koutarou Shindou, Koudai Katsunaga
Metal pipes having an inner diameter of about 25 mm or less are frequently used as heat exchangers for power plants, gas pipes, and water pipes. However, erosion and corrosion due to long-term use may cause serious accidents, such as steam leaks, resulting in…
Bowen Cai, 1 1, Wufei Ma
Short Retraction Notice ENG does not meet authors’ publication requirements. This article has been retracted to straighten the academic record. In making this decision the Editorial Board follows COPE's Retraction Guidelines . Aim is to promote the circulatio…
Amanda M. M. Bustin, R. Marc Bustin
A key unknown limiting assessment of risk posed by inducing anomalous seismicity during hydraulic fracturing is the potential maximum magnitude of an event. To provide insights into the variation in maximum magnitude that can be induced by a hydraulic fractur…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).