ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
R. G. Khadeev
The proposed mechanism was described earlier in the article: Synchronous Motor for the Vehicle, Volume 9, Number 3, March 2017. This article contains some explanations about a synchronous motor with a built-in excitation generator, the stator of which can rot…
Samwel Victor Manyele
In this paper, the performance of a waste rock transportation process in an open pit mine was assessed by using cycle time data. A computerized truck- excavator dispatch system was used to record the cycle times. The process was broken into seven steps (or co…
Yao Yu, Rui Miao, Louis Miller, Huojun Yang, Gaylord Olson
A Geothermal Heat Pump (GHP) system is known to have enormous potential for building energy savings and the reduction of associated greenhouse gas emissions, due to its high Coefficient Of Performance (COP). The use of a GHP system in cold-climate regions is…
Samwel Victor Manyele
This study presents the effect of excavator model, loading operation location, shift availability and truck -shovel combination on loading cycle time and productivity of an open-pit mine. The loading cycle time was used to assess the material loading system p…
Wenwei Yang, Qili Yang
The study on the dynamic characteristics of light steel residential structural system has both theoretical and practical significance for the application and promotion of light steel residential structural system. In this paper, we analyze several common type…
M. Shirif, A. Alarbah, H. Ibrahim, E. Shirif
A numerical simulation study using the CMG-STAR Simulator was performed to compare the performance of the newly developed process (VWSAGD) utilizing vertical wells to enhance heavy oil recovery during steam assisted gravity drainage against the conventional s…
Wathiq Al-Jabban, Sven Knutsson, Jan Laue, Nadhir Al-Ansari
Effects of using small amounts of a Petrit T, a by-product of manufacture sponge iron, to modify clayey silt soil were investigated in this study. Petrit T was added at 2%, 4% and 7% of soil dry weight. A series of unconfined compressive strength tests, consi…
Faisal Al Thobiani, Van Tung Tran, Tiedo Tinga
Thermal image, or thermogram, becomes a new type of signal for machine condition monitoring and fault diagnosis due to the capability to display real-time temperature distribution and possibility to indicate the machine’s operating condition through its tempe…
Fathy H. Riad, 1 1
In this paper, we discuss the mixture model of two extreme lower bound distributions. First, some properties we obtain of the model with hazard function are discussed. In addition, the estimates of the unknown parameters via the EM algorithm are obtained. The…
Cai Hu
In this paper, the orientation of grains which adjacent to a developed opening crack was investigated by EBSD. A definition of θ has been came up with which represents the angle between the principal stress plane and each plane of the grains. Smaller θ means…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).