ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Jae Yoon Kang, Jong Sup Park, Woo Tai Jung, Moon Seoung Keum
Since the previous strength prediction models for the perfobond rib connector were proposed based upon the results of push-out tests conducted on concretes with compressive strength below 50 MPa, push-out test is performed on perfobond shear connectors applyi…
Tomio Sato, Tetsuya Akitsu
A multimode-quartz-crystal oscillator was developed to excite stable dual-mode resonance at different frequencies: The oscillation of the 3rd harmonic resonance of the principle C-mode and an additional resonance B-mode of SC-cut crystal. Harmonic combination…
Yassin Osman, Nadhir Al-Ansari, Mawada Abdellatif, Sadeq B. Aljawad, Sven Knutsson
The Middle East (ME) is characterized by its water shortage problem. This region with its arid climate is expected to be the most vulnerable in the world to the potential impacts of climate change. Iraq (located in ME) is seriously experiencing water shortage…
Guoqing Gou, Yuping Yang, Hui Chen
Integrated computational materials engineering (ICME) is an emerging discipline that can speed up product development by unifying material, design, fabrication, and computational power in a virtual environment. Developing and adapting ICME in industries is a…
Hagar Alm-Eldin Bastawissi, Medhat Elkelawy
In diesel engines the fuel injection system produces the spray, which directly affects the combustion of the fuel, which in turn determines the production of pollutants. In spite of this, the details of this causal relationship remain unclear. There is, howev…
Zakaria Al-Omari
Integration of Solar Photovoltaic (PV) generation into an existing distribution system has many impacts on the system, with the power flow being one of the major issues. This impact is not generic for any network, but it may manifest itself either positively…
Flavio Rodrigues, Pedro C. G. da S. Vellasco, Luciano R. O. de Lima, Sebastião A. L. de Andrade
Height limitations are not uncommon in multi-storey buildings due to economic requirements and esthetical considerations. Substantial spaces are normally required to enable the passage of large pipes and ducts beneath steel beams leading to uneconomic floor h…
Kazuko Morizawa
This paper proposes a heuristic algorithm, called list-based squeezing branch and bound algorithm, for solving a machine-fixed, machining-assembly flowshop scheduling problem to minimize makespan. The machine-fixed, machining-assembly flowshop consists of som…
Mohammed Hatem Mohammed, Nadhir Al-Ansari, Sven Knutsson
This study describes the performance of concrete in fresh state, intended for sealing deep bore-holes in the host rock of radioactive repositories. Set of different paste volumes, combinations of water-to-powder ratios and fine aggregate contents have been pe…
Michael Aizenshtein, Natalya Froumin, Nachum Frage
Fabrication of MCCs (Metal Ceramic Composites) and ceramic brazing requires improved wetting properties are often absent in various ceramic/metals systems. This report summarizes a comprehensive study concerning the wetting properties of boron carbide in cont…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).