ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu…
Jinbin Li, Yao Yao
With the advance in renewable generation technologies, the cost of renewable energy becomes increasingly competitive when compared to fossil fuel-based generation resources. It is economically beneficial to integrate large amounts of renewable capacity in pow…
Ji-Hyun Hwang, Ki-Tae Park
Safety related accidents of buildings and civil engineering structures have been reported all over the world. With the increasing importance of securing the safety of social infrastructure and optimum performance levels to prevent these accidents, a lot of at…
Mohamed Talaat, Reda Edris, Naglaa Ibrahim, Fatma Omar, Mohamed Ibrahim
A renewable energy plant which relies on wind speed or solar insolation is unreliable because of the stochastic nature of weather patterns. It is theorized that by using multiple renewable energy plants in separate areas of a region, the different weather con…
Vera V. Vakhnina, Aleksey A. Kuvshinov
It is justified that during geomagnetic storms the high voltage synchronous engines are being impacted by high current harmonics of even sequences powered by power transformer due to geo-induced high voltage currents flowed through the windings. Equivalent ci…
Marina M. Burashnikova, Irina V. Zotova, Ivan A. Kazarinov
The effect of barium additives on the process of anodic corrosion of lead - tin - calcium alloys in a 4.8 М sulfuric acid solution was studied. Cyclic voltammetry, impedance spectroscopy, weight loss measurements and scanning electronic microscope analysis ha…
Merkebu Zenebe Degefa, Robert John Millar, Matti Koivisto, Muhammad Humayun, Matti Lehtonen
With the expansion of distributed generation systems and demand response programs, the need to fully utilize distribu tion system capacity has increased. In addition, the potential bidirectional flow of power on distribution networks de mands voltage visibili…
Yasemin Mesda
The aim of this study is to analyze of the cable-glass systems which are used on the glass curtain wall according to their types, degree, architectural and structural effects. The suspended glass system with pre-stressed cable truss (SGSPCT) is widely started…
Zacharia Katambara
The advantages that the rooftop rainwater harvesting system has as a source of water supply have been examined. The observed daily rainfall records of 10 years and the current total roof area of the facilities at Mbeya University of Science and Technology as…
Keunhee Cho, Sung Yong Park, Sung Tae Kim, Jeong-Rae Cho, Byung-Suk Kim
This paper examines the effect of freezing and thawing on the coarse sand coating chosen to achieve the composition of FRP and concrete in FRP-concrete composite deck. Push-out test specimens with dimensions of 100 × 100 × 450 mm were subjected to repeated fr…
Mohamed Mosad El-Gendy, Ibrahim A. El Araby, Mohamed A. Kamal
This paper presents some aspects of the load-settlement behavior for large diameter bored piles using four different international codes, namely: ECP 202 [1], DIN 4014 [2], AASHTO [3] and French Code [4]. Ultimate capacities for 38 pile load tests founded in…
No articles in this issue.
Engineering (ENG) is an international journal dedicated to the latest advancements in engineering. The goal of this journal is to provide a platform for engineers and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of engineering. All manuscripts mu… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).