ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Journal of Crystallization Process and Technology (JCPT) is an international, specialized, English-language journal devoted to publication of original contributions concerning with the crystallization process, studies and properties of the crystalline materials. It covers the basic sciences, engineering aspects and ap…
Elmira Alamanova, Nasira Shyytyeva, Zhyldyz Berdalievа, Nurzat Abdyldaeva, Astra Duishonbaeva, Zhypargul Abdullaeva
Layered metal-organic polymer [Co(L)6](NO3)2 was obtained (where, L = C3H4N2) and structurally characterized by X-Ray diffraction (XRD) analysis. Crystals have trigonal structure: a = b = 12.3555(10) Ǻ, c = 14.4833(3) Ǻ; α = β = 90˚; γ = 120˚; V = 1914.78(5)…
Grygoriy S. Pekar, Alexandr F. Singaеvsky, Myhailo M. Lokshin, Ilya A. Vasin, Oleksandr V. Dubikovskyi
Unconventional ways to improve the efficiency of purification of two different semiconductor materials of current interest, ZnO and Ge, are described. It is shown that, by using chemically assisted vapour transport of ZnO with carbon as a transporting agent,…
Rui Zhang, Xuezhong Wang, Yang Zhang, Tao Liu
Crystal shape distribution, i.e. the multidimensional size distribution of crystals, is of great importance to their down-stream processing such as in filtration as well as to the end-use properties including the dissolution rate and bioavailability for cryst…
Amel Adjimi, Meryem Lamri Zeggar, 1 1, Nadhir Attaf, Mohammed Salah Aida, 1 1
In the present work, undoped (SnO 2 ) and fluorine-doped tin oxide (FTO) thin films were prepared by sol-gel process using a solution composed of (SnCl 2 , H 2 O), (NH 4 F), and ethanol mixture. The fluorine concentration effect on structural, optical and ele…
Nidhi Yaduvanshi, Deepak Kumar, Nikhil Rastogi, Ashok Kumar
A single scan has been performed in Differential Scanning Calorimetry (DSC) at a heating rate of 15 o C/min under non-isothermal conditions to investigate the crystallization kinetics of glassy Se 90 Sb 10-x Ag x alloys (where x = 2, 4, 6, 8). For this purpos…
Noopur Rathi, Vilas G. Gaikar
Batch crystallization studies of curcumin from hydrotropic solutions of sodium cumenesulphonate (NaCS) and of cinnamic acid from a photosensitive hydrotropic medium of sodium cinnamate (Na-CIN) were carried out, in an agitated reactor for the effect of altern…
Julien Yovogan, Gérard Degan, Latif Fagbemi
An analytical investigation is conducted to study the effect of magnetic field on convection heat transfer through packed porous beds which consists of a horizontal fluid layer (river bed) and a porous zone with anisotropic permeability and underlined by a su…
Xiaoxin Zhang, Semiramis Friedrich, Bernd Friedrich
Purification is a primary application of zone melting, in which the improvement of efficiency, production yield and minimum achievable impurity level are always the research focus due to the increasing demand for high purity metals. This paper has systematica…
Metogbe B. Djihouessi, Sofiath Onifade, Martin P. Aina, Hervé E. Labité, François de Paule Codo
This paper presented the first part of the studies about the development of a tool for groundwater contamination prediction, conducted by the Laboratory of Sciences and Technology of Water (UAC/Benin). The investigation made consisted in estimating the combin…
Daniel Selzer, Burkard Spiegel, Matthias Kind
Crystal nucleation is important to control the product properties in industrial crystallization processes. To investigate crystallization phenomena, methods which rely on microscopic volumes have gained relevance over the last decade. Microfluidic devices are…
No articles in 2017.
Journal of Crystallization Process and Technology (JCPT) is an international, specialized, English-language journal devoted to publication of original contributions concerning with the crystallization process, studies and properties of the crystalline materials. It covers the basic sciences, engineering aspects and ap… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).