ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Electronics Cooling and Thermal Control (JECTC) is a quarterly, peer-reviewed, academic journal. It aims to provide a vehicle for the exchange and dissemination of original research results, technical notes, and state-of-the-art reviews pertaining to the electronic cooling and thermal system control tec…
Yury F. Maydanik, Vladimir G. Pastukhov, Mariya A. Chernysheva
The paper presents the results of development and investigation of a copper miniature loop heat pipe (LHP) with acetone as a working fluid. The device was equipped with a flat evaporator measuring 80 × 42 × 7 mm and vapor and liquid lines with an outside diam…
G. Casano, S. Piva
The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by high power and high compactness, thereby…
Abdul Rahim A. Khaled
Laminar flow and heat transfer in different protruding-edged plate systems are modelled and analyzed in the present work. These include the Parallel Flow (PF) and the Counter Flow (CF) protruding-edgedplate exchangers as well as those systems being subjected…
Kevin R. Anderson, Jun Lin, Chris McNamara, Valerio Magri
High speed and high efficiency synchronized electric motors are favored in the automotive industry and turbo machinery industry worldwide because of the demands placed on efficiency. Herein an electric motor thermal control system using cooling air which ente…
Masaya Kuribara, Hosei Nagano
This paper presents the temperature dependence of in-plane thermal diffusivity and anisotropy distribution for pitch-based carbon-fiber-reinforced polymers (CFRPs). The measurement was performed using the laser-spot periodic heating method. The samples were u…
K. N. Shukla
The paper presents an overview of heat pipes, especially those used in different space missions. Historical perspectives, principles of operations, types of heat pipes are discussed. Several factors have contributed to the science and technology of the presen…
Jiwon Yeo, Seiya Yamashita, Mizuki Hayashida, Shigeru Koyama, 1 1
With rapid development of the semiconductor technology, more efficient cooling systems for electronic devices are needed. In this situation, in the present study, a loop thermosyphon type cooling system, which is composed mainly of a heating block, an evapora…
Masahito Nishikawara, Hosei Nagano, Laetitia Mottet, Marc Prat
Heat transfer of a capillary evaporator in a loop heat pipe was analyzed through 3D numerical simulations to study the effects of the thermal conductivity of the wick, the contact area between the casing and the wick, and the subcooling in the compensation ch…
Z. Kovziridze, N. Nizharadze, G. Tabatadze, T. Cheishvili, Z. Mestvirishvili, E. Nikoleishvili, M. Mshvildadze, N. Darakhvelidze
Composites were obtained in the in SiC-SiAlON and Al 2 O 3 -SiAlON system. Physical-chemical processes going on at the obtaining of SiALON within the range of 800 ° C - 1500 ° C were studied. Charge compositions and sintering regime were selected. It was prov…
Claire Perfetti, Carlo Saverio Iorio
Liquid layers evaporating under the influence of a gas shear flow presents a non-uniform distribution of the evaporation rate all along the interface. Being the evaporation an endothermic process, a thermal gradient along the interface is generated and thermo…
No articles in this issue.
The Journal of Electronics Cooling and Thermal Control (JECTC) is a quarterly, peer-reviewed, academic journal. It aims to provide a vehicle for the exchange and dissemination of original research results, technical notes, and state-of-the-art reviews pertaining to the electronic cooling and thermal system control tec… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).