ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo…
K.K. Alaneme, S. Ranganathan, T. Mojisola
The mechanical behaviour of duplex phases produced in a medium carbon low alloy steel with potentials for use as machine body parts and vehicle panels, has been investigated. A representative composition of the steel (C: 0.3; Si: 0.28; Mn: 0.97; Cr: 0.15) was…
A.V. Adedayo
The basic principles of Oxyfuel cutting of metals lie in rapid high-temperature oxidation of the cut metal. Considerable proportion of the published work on the subject of oxygen cutting, the details of the oxidation reaction are overlooked or confused. Most…
Dinesh Gond, Vikas Chawla, D. Puri, S. Prakash
The oxidation behaviour of T-91 steel and T-22 steel in salt of 75wt.% Na 2 SO 4 +25wt.% NaCl has been studied under isothermal conditions at a temperature of 900°C in a cyclic manner. Oxidation kinetics was established for the T-91 steel and T-22 steel in sa…
K.K. Alaneme, S.O. Olanrewaju
This research is centered on the design of a diesel fired heat-treatment furnace using locally sourced materials. The design philosophy is to eliminate the use of heating elements requiring electric power which is poorly supplied in the country. Design drawin…
I.O. Oladele, J.A. Omotoyinbo, J.O.T. Adewara
This work was carried out to investigate the effect of chemical treatment on the constituents and tensile properties of sisal fibre (Agave Sisalana). Sisal leaves were cut and buried underground close to the stream and were wetted with water regularly in orde…
J. A. Ajao
The microstructure of a series of binary Ni-B alloys containing various amounts of vanadium additions were investigated by Differential Thermal Analysis (DTA), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-…
A.V. Adedayo, S.A. Ibitoye, O.A. Oyetoyan
This paper reports investigations made on the annealing heat treatment effects on steel welds. The properties of the weld investigated were hardness value and toughness. Micro examination of the samples was also done with optical microscopy. Four (4) differen…
J.A. Omotoyinbo, I.O. Oladele
In order to determine the effect of increased magnesium addition on the strengthening behaviour during deformation, four types of aluminium alloys were cast and rolled. The cast aluminium alloys contain; 0.451%Mg, 0.551%Mg, 0.651%Mg, and 0.751%Mg in addition…
V.S. Aigbodion, J. O. Agunsoye, V. Kalu, F. Asuke, S. Ola
Ceramic matrix composites reinforced with metals have been developed to overcome the intensive brittleness and lack of reliability of monolithic ceramics, with a view to introduce ceramics in structural parts used in severe environments such as rocket and jet…
Subhranshu Sekhar Samal, P. Jeyaraman, Vinita Vishwakarma
Surface modification is an important element of textile manufacturing. The final properties of a textile material are critical in determining how they perform for their given end use. More recently, botany and nanotechnology have united to explore not only th…
No articles in this issue.
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).