ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo…
J. Kishore Kumar, P. Sundaramoorthi
Calcium phosphates and oxalates are the most frequently observed bio-mineral phases. Many kinetics studies have been carried out on their crystal formation and dissolution in supersaturated and under saturated solutions, respectively. Major parameters include…
C. I. Nwoye
Model for predicting the quantity of water evaporated during drying of clay at a temperature range 80-110℃ has been derived. The model; E=exp[0.3424(LogT) 2.3529 ] indicates that the quantity of evaporated water during the drying process is dependent on the d…
K. J. Arun, S. Jayalekshmi
A potential organic nonlinear optical (NLO) single crystal based on amino acid, L alaninium oxalate (LAO) is grown using the simple chiral amino acid L alanine and oxalic acid by slow evaporation method. Grown crystals have an optimum dimension of 40 x15 x 8…
C. I. Nwoye
Model for predicting the initial solution pH at pre-assumed final pH and concentration of dissolved zinc, during leaching of galena in butanoic acid solution has been derived. The model; α = 1.4γ/ln[(Zn) 1/3 shows that the initial pH of the leaching is depend…
Shefali Trivedi, Yashwant Mehta, K. Chandra, P.S. Mishra, P.S. Mishra
The role of chromium in high density Fe–P binary, Fe–P–Cr ternary alloys is observed by characterization in terms of microstructure, porosity content/densification, hardness and tensile properties. The alloys were made using a hot powder forging technique. In…
D. Luna-Zaragoza, E. T. Romero-Guzmán, L. R. Reyes-Gutiérrez
Hydroxyapatite is a calcium phosphate in the apatite group. It has numerous applications due to its particular properties including the sorption of metallic ions. This makes it useful for the treatment of contaminated groundwater and for soil decontamination.…
I.O. Oladele, A.D. Akinwekomi, S. Aribo, A.K. Aladenika
Natural sponge fibre (Acanthus montanus) was used as reinforcement for ceiling materials in this research work. This fibre, being fairly strong and stiff as well as cheap and plentiful with low energy demand during manufacture, are strong contenders for the r…
M. Sundararajan, S. Ramaswamy, P. Raghavan
A representative feed sample of Yellow sand was wet-sieved in order to recover the desired fractions for glass making. The mass percentage of (–600 +300) μm and (–300 +125)μm fraction was found to be 44.2 and 55.8% (ratio 1:2.26).Hence, this ratio which satis…
Satish Babu Boppana, K . Chennakeshavalu
The present paper reports on the preparation of various Al-5Ti master alloys by the reaction of halide salt (K 2 TiF 6 ) with molten Al in an induction furnace. The master alloys are supposed to be used for the in-situ processing of Al-TiC Metal Matrix Compos…
R. Ramesh, J. Kishorekumar, P. Suresh, P. Sundaramoorthi
In the modern science and technology the electrical and thermal conductivity studies of renal stone plays an impotent role to understand the natural formation. The free electrons act as carriers to carry their energy. In the present investigations, three rena…
No articles in this issue.
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).