ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo…
J. A. Ajao
The influence of solidification parameters on the morphology of a number of meltspun Nickelbased hard alloys has been investigated by means of scanning electron microscopy (SEM), conventional transmission electron microscopy and energy dispersive X-ray analys…
C. I. Nwoye
Quadratic and linear models have been derived for predicting the heat-affected zone (HAZ) hardness of water cooled cast iron weldment in relation to the combined and respective values of the heat-affected zone hardness of aluminum and mild steel welded and co…
T. Uma Devi, N. Lawrence, R. Ramesh Babu, K. Ramamurthi, G. Bhagavannarayana
Single crystal of an organic nonlinear optical (NLO) material, Glycine picrate (GP), was grown by slow cooling method. The structural perfection of the grown crystal was analyzed by highresolution X-ray diffraction (rocking curve) measurements. UV-Visible-NIR…
D. Beura, D. Acharya, P. Singh, S. Acharya
H?gbomite associated with vanadium bearing titaniferous magnetite has been identified in mafic-ultramafic suite of rocks of Moulabhanj, Orissa, India. The igneous complex intruded into granulite terrain of Eastern Ghat Super Group. The iron mineral assemblage…
Ranjita Swain, R. Bhima Rao
PLK (Partially Laterised Khondalite) rock is a general terminology used in this paper for those rocks which are in general associated in bauxite mining such as Partially Altered Khondalite (PAK) rocks, Partially Kaolinised Khondalite (PKK) rocks and Lithomerg…
Vikas Chawla, D. Puri, S. Prakasha, Amita Chawla, Buta Singh Sidhu
Nitrided coatings have been used to increase hardness and to improve the wear and corrosion resistance of structural materials. In this work, TiAlN and AlCrN coatings were deposited on Superfer 800H (INCOLOY 800 H) substrate by using Balzer’s rapid coating sy…
M. Sundararajan, S. Ramaswamy, P. Raghavan
A representative feed sample of White Silica Sand was wet-sieved in order to recover the desired fractions for glass making. BIS specification shows that (–600, +300) μm] fraction [A] should not be more than 50% and (–300, +125) μm fraction [B] should be 50%…
Vikas Chawla, D. Puri, S. Prakash, Buta Singh Sidhu
In this work, TiAlN and AlCrN coatings were deposited on Superfer 800H superalloy using Balzer’s rapid coating system (RCS) machine (make Oerlikon Balzers, Swiss) under a reactive nitrogen atmosphere. The corrosion resistance of the substrate, TiAlN and AlCrN…
G. Kanchana, P. Sundaramoorthi, G.P. Jeyanthi
Electrical and thermal conductivity studies play a vital role in the field of science and technology. According to the conductivity terms, materials can be classified in to good conductors, bad conductors, semiconductors and super conductors. In the free elec…
O. A. Olasupo, J. O. Borode
Insulating refractory ramming mass was developed from suitable Nigerian refractory raw materials. Rammed samples from several ratios of clay, silica, mica, bentonite and calcium aluminate cement (Durax) were prepared using the American Foundrymen Society (AFS…
No articles in this issue.
The Journal of Minerals and Materials Characterization and Engineering is an international peer-reviewed journal for the publication of original research in the fields of characterization of the minerals, metals and materials and its applications to the processing of them. Characterization has become the foundation fo… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).