ArticlesArchiveAboutEditorial BoardAuthor Guidelines
Call for papersThe 2026 special issue on Climate & Health is open for submissions.Learn more
Modern Mechanical Engineering (MME) is an international journal dedicated to the latest advancements in mechanical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of m…
Nabil W. Musa, V. I. Gulyayev, L. V. Shevchuk, Hasan Aldabas
This paper deals with the theoretic simulation of a drill bit whirling under conditions of its contact interaction with the bore-hole bottom rock plane. The bit is considered to be an absolutely rigid ellipsoidal body with uneven surface. It is attached to th…
Paul Ndy Von Kluge, Djuidjé Kenmoé Germaine, Kofané Timoléon Crépin
Choices of excitation signals are important in engineering sciences and in physical simulations; a sufficient excitation can be critical in modelling a complicated nonlinear dynamic system. The discontinuous dynamic of a non-linear, friction-induced with two…
Maziar Ramezani, Thomas Neitzert
High temperature mechanical properties and formability of the AZ61 magnesium alloy are evalu-ated in this paper. Tensile tests were conducted to obtain the formability parameters at elevated temperatures of up to 400 ℃ . The results showed that at higher temp…
Y. Cao, X. B. Chen
Piezoelectric-driven stick slip actuators have been drawn more and more attention in the nano- positioning application due to the high accuracy and theoretical unlimited displacement. However, the hysteresis of piezoelectric actuator (PEA) and the nonlinear f…
Ahmed Ibrahim, Yeong Ryu, Mir Saidpour
This paper discusses the stresses developed in a thin-walled pressure vessels. Pressure vessels (cylindrical or spherical) are designed to hold gases or liquids at a pressure substantially higher than the ambient pressure. Equations of static equilibrium alon…
Berend Denkena, Martin Eckl, Dominik Brouwer
This paper presents a novel design for a knee disarticulation prosthesis. In this design, three hydraulic cylinders form the supporting structure and provide the damping effect at the same time. That way the novel knee joint offers two fundamental advantages…
Sinitsyna Vasilya, Sinitsyn Anton
This paper includes descriptions of the stress distribution regularities in the tight joint parts, regularities of the stress state changes in the contact region along coupling length, stress concentration factors, levels of additional stresses caused by pres…
P. Jia, S. K. Lai, W. Zhang, C. W. Lim
The aim of this paper is to conduct experimental modal analysis and numerical simulation to verify the structural characteristics of a deployable-retractable wing for aircraft and spacecraft. A modal impact test was conducted in order to determine the free vi…
Ricardo Chicurel-Uziel
The system presented in this paper allows the direct transfer of kinetic energy of a vehicle’s motion to a flywheel and vice-versa. For braking, a cable winds onto a pulley geared to the vehicle’s propulsion driveshaft as it unwinds from another pulley geared…
Jinho Lee, Jeongmin Jo, Yongjae Han, Changyoung Lee, Yan Sun
The high speed maglev is mainly characterized by propulsion using linear synchronous motor (LSM) and vehicle levitation from the guideway surface. In LSM propulsion control, the position detection sensor is used to detect running vehicle position for synchron…
No articles in this issue.
Modern Mechanical Engineering (MME) is an international journal dedicated to the latest advancements in mechanical engineering. The goal of this journal is to provide a platform for scientists and academicians all over the world to promote, share, and discuss various new issues and developments in different areas of m… All articles are open access under a CC BY 4.0 licence, with authors retaining copyright.
Authors submit their manuscript, metadata, and declarations through the portal. There is no submission fee.
The editorial office screens the manuscript for scope, completeness, and formatting before assigning a handling editor.
At least two independent reviewers evaluate the manuscript under single-blind review. Where revisions are required, authors respond point by point.
On acceptance the article processing charge is invoiced and the CC BY 4.0 copyright handover is signed.
The article is copyedited, typeset, and given a DOI, then publishes open access with a permanent link.
Manuscripts must be original and not under consideration elsewhere. Submit in Microsoft Word or LaTeX with figures at 300 dpi minimum. Structure research articles as Abstract, Introduction, Methods, Results, Discussion, and References.
Use the journal's numbered (Vancouver) reference style. Cite sources consecutively in the order they appear, and ensure every reference is complete and retrievable.
Declare all funding sources, conflicts of interest, and ethical approvals (including informed consent and animal-care statements where applicable).